Matronics Email Lists

Hugh, S-LSA. 2006 Allegro 2000

Sent from my Brian's iPhone

On Sep 28, 2019, at 06:39, Hugh McKay <hgmckay@bellsouth.net (
Brian,

I also looked at the Echo UAT unit. My Allegro is E-LS ...

I have just read the discussion on the above subject. The skybeacon will not fit on the Allegro 2000 or the 2007 without major and costly modification, and the tailBeacon likewise. However, there is ...

I would encourage you to communicate with Doug at Allegro USA.. He would be the one that would know how to respond to this question.

Sent from my Brian's
iPhone

On Jul 15, 2018, at 2:03 PM, l ...

I also learned to fly in an allegro 2000. My flight instructor was just the opposite everything was full flap, stall it in landings.
I found it extremely difficult to land as the plane being so ligh ...

I have been to the page Arizona flying in several times it's only about an hour and 45 minutes by air from me. Correct on mostly being flight design ct but all are welcome and it is a great time. Flyi ...

Bill, where are you located? We may need to have East meeting and a West meeting. I am in North East Arizona.
Brian
N3081x

Sent from my Brian's
iPhone

On Feb 27, 2017, at 11:13, Bill Crowl ...

The wheel is a split wheel, after removing the bolts you just take off the outside half of the wheel. There is no need to do anything about the brakes at this time. I believe the bolts are number five ...

N3081x still here.
2006 100hp Dynon 100
Taylor Az KTYL

Sent from my Brian's
iPhone

On Aug 2, 2016, at 11:07, N456TS <bottleworksnet@gmail.com> wrote:

I see that 10 years ag ...

Check the ground connection on the antenna. Mine has some silver tape on the inside of the fiberglass to make your ground, possibly use ohmmeter to see if that ground connection has broke somehow. Pos ...

Hugh,
As I understand it, the proposed, guessed at max weight for LSA was to be 1232. The Allegro 2000 being one of the first LSA to be approved used this weight even though 1320 became the final wei ...

Hugh,
I have bled brakes on my 2006. The small pin hole seems to just be an overflow. If I put too much Dot 3/4 in it overflows out the small pin hole when tightening the top onto the master cylinder ...

Hugh,
Seems that I talked to Doug about that. He said to go to an automotive parts store and get some molding like what is used on car doors.. My is cracked but have not replaced it yet..

Good lu ...

On the Flight Design forum they are talking about a mandatory 5 year rubber parts replacement for Rotax engines. Have any Allegro owners of 2005 or earlier done this?? Or thought about this?? Anyone ...

Hi Roger,

O course I will be there!!!! Would love to see another Allegro come to Page this year..

Thanks for the personal note!!!
Brian

--- On Sun, 1/30/11, Roger Lee <ssadiver1@yahoo.c ...

It has to be a typo on the speed.. 138MPH is max speed LSA...1320 is max weight LSA. My 2006 2000 is rated at 138mph at 1230 lbs..in the USA

Brian
--- On Thu, 1/27/11, aerosiam <pk@aero-si ...

Roger,
The Allegro calls for Dot 3,4 Brake fluid!!!!

brian

Sent from Brian's iPod

On Nov 4, 2010, at 7:40, "Roger Lee" <ssadiver1@yahoo.com> wrote:

P.S.

If you want ...

Hugh,

We have filled from the bottom -up,,, both sides at the same time. Small oil type cans with plastic line. I have had a problem with pressure when the system gets cold.. I have replaced the ...

Thanks Paul,

Seems that there are two rivets in the middle and 6-8 rivets around the outside edge. So the all the outside edge rivets would need to be drilled out?
Brian

--- On Sun, 10/31/10, ...

Hugh,

Thanks, It is SLSA,,, I have a A & P working with me..I was wondering if we have to drill out some rivets??
Brian

--- On Sat, 10/30/10, Hugh McKay <hgmckay@bellsouth.net> wrote: ...

I have suffered a tail strike, so that some minor fiberglass repair is needed.. What is involved in removing and reinstalling a rudder in a Allegro 2000? Yes,the bolt for the skid plate broke up th ...