Matronics Email Lists

I found one of the chandler hangars for sale. It was almost ast much as my current home. I may have to grab a snow bird rental for the summer and look for some thin more permanent when I get there. ...

You might try giving Rob Hickman a call. AFS used to used Crossbows, but the switched to another OEM for a while, and are now using Dynon.

Get From: owner-rv10-list-server@matronics.com ...

Where in Arizona are you located? I�ll be moving out to Surprise in a few months. I�m having a heck of time trying to find someplace to park my RV-10 in the valley.

Get From: owner-rv10 ...

Doc,

Do you have photos, plans, part/vendor list for your tug? I�m looking to build one this year as a winter project. I have been looking at the various units people have built. I like th ...

I recently learned something the hard way. If you have FlyRV10 pins and Aerosport interior panels, there isn�t enough clearance to use the vans supplied magnetic switches.

The magnet in the ...

Hartzell switched to a different product last year, but I don�t know if you can co-mingle the grease. I suspect not.

I made the switch when I had my prop serviced last year. �

...

I don�t, but I do have a flat pack Vizion that I�m about ready to post on VAF.

Get From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronics.com> on behalf of dlm ...

I disagree.�� Even if you are careful, there is a small percentage of time that you’ll not hit the hole.�� Admittedly, I’ve accidently let the bogart bar slip a couple times a year.�� After flying ...

I highly recommend their fuel injection class when they start them up again. � I was fortunate to have Don balance my injectors after class one day.

Get From: owner-rv10-list-server@matronics ...

Wide Open Throttle
�
From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronics.com> On Behalf Of Robert Jones
Sent: Monday, October 4, 2021 4:52 PM
To: rv10-list@mat ...

Aerosportproducts.com

Get From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronics.com> on behalf of David Carr <junk@dcarr.org>
Sent: Sunday, May 30, 2021 ...

122 kts � 0 degrees?�Shouldn’t that be Vne?�� 122kts implies it’s going to be raining flaps all over the place.�� Since most of us cruise at a much higher airspeed.� :^)
�
�
From: owner-rv ...

I have a pair of them in the back. They were about nine pounds lighter than the pair of Oddessy 680s that I originally installed. I don�t remember their exact weight at the moment. The pair are pr ...

I have had a pair of earthx installed for about three years. I�ve not had any issues and they work as advertised.

Get From: owner-rv10-list-server@matronics.com <owner-rv10-list-serve ...

Here’s a photo of the new grease Hartzell is now using. ��It appears that it’s only available through Hartzell authorized service centers. �The shop I used wanted $20~$25 per tube. �

It wo ...

I was surprised with that as well when I had my prop serviced recently. �The shop included a tube of the new grease. ��I have yet to find a source for the new grease other than a prop shop.

A ...

Yes, I had an early Vizion and experienced something similar. Lucas insisted the unit was fine and that they hadn�t had any Vizion issues. He was also insistent that the AFS Arinc unit was the culpr ...

have you talked with a Don Rivera at AirFlow Performance yet? They are in Spartanburg.

Get From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronics.com> on behalf ...

Filed to about a 1/16� gap. Be sure to allow for paint thickness, so my 1/16� gap was probably closer to 1/8� before paint.

Although I do know others that installed a rubber seal too.

...

What EFIS do you have?

With most of the major vendors, you can swap out the Trutrak servos with the EFIS vendor servos for less than$2k. �For many of us, that want an option when we built. B ...