Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Trim Cable Anchor Bracket Installation

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
effectus(at)rogers.com
Guest





PostPosted: Sat Feb 04, 2006 4:54 pm    Post subject: Trim Cable Anchor Bracket Installation Reply with quote

Listers,
 
    I received my two trim cable anchor brackets from Dave the other day via UPS. Dave provided a great service and I would recommend that you all get your orders in. This is a great fix to a poorly designed bracket. I just finished replicating the two cover plates that they attach to. This had to be done because the bolt pattern is different from the original brackets. It took me about 2 hours to draw and cut them out of the aluminum pieces that came with the emp kit.
 
    I have decided that I want to be able to remove them from the access cover so I have dimpled the access cover and countersunk the bottom of the bracket. I am going to install them using stainless AN507C-632R6 screws with AN365-632 lock nuts. People have commented about the inability to rotate the older nut when mounted to the access plate. I felt that it would be much easier to adjust the cable relative to the anchor bracket by spinning the anchor bracket around the cable. I now have only to remove the cover screws and detach the anchor bracket from the cover to adjust/service the cable.
 
     I hope this helps.
 
Dave Hertner
40164 - Emp finished ordering QB balance of kit.


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
william(at)gbta.net
Guest





PostPosted: Sun Feb 05, 2006 6:51 pm    Post subject: Trim Cable Anchor Bracket Installation Reply with quote

Dave, could you post a pic of you trim tab brackets when installed??
 
Bill
 
DO NOT ARCHIVE
[quote] ---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group