Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

flap-aileron trailing edge alignment

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
ricksked(at)earthlink.net
Guest





PostPosted: Thu Jan 05, 2006 11:42 am    Post subject: flap-aileron trailing edge alignment Reply with quote


Jay,
I thought the same thing and figured out the flap was not fully retracted. See if the top skin or something else is causing the flap not to fully seat against the rear spar. It was only a very small amount to completely seat and then it was fine.
Rick S.
40185
Fuselage


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jhasbrouck(at)woh.rr.com
Guest





PostPosted: Thu Jan 05, 2006 3:01 pm    Post subject: flap-aileron trailing edge alignment Reply with quote


Jay,
As an aside, my Piper Arrow was much the same way. Ailerons and flap
trailing edges did not align with one side being farther off the the other.
Asked an IA about it and got the usual "they're all that way" response.
After comparing the -10 construction to the factory built Arrow I have
confidence in the strenght of the -10 airframe.....john


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
LessDragProd(at)aol.com
Guest





PostPosted: Thu Jan 05, 2006 8:45 pm    Post subject: flap-aileron trailing edge alignment Reply with quote


Per the Piper book, the Arrow uses the flaps to trim for roll.  Been there, done that.
 
Regards,
Jim Ayers
 
In a message dated 01/05/2006 3:03:00 PM Pacific Standard Time, jhasbrouck(at)woh.rr.com writes:
Jay,
     As an aside, my Piper Arrow was much the same way.  Ailerons and flap
trailing edges did not align with one side being farther off the the other.
Asked an IA about it and got the usual "they're all that way" response.
After comparing the -10 construction to the factory built Arrow I have
confidence in the strenght of the -10 airframe.....john


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group