Matronics Email Lists :: View topic - E-185 scavenge pump housing

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

E-185 scavenge pump housing

Matronics Email Lists Forum Index -> Beech-List

View previous topic :: View next topic

Author Message

n4546v(at)mindspring.com
Guest

Posted: Mon Oct 08, 2007 7:33 pm Post subject: E-185 scavenge pump housing

Hello Listers:



On a E-185 series engine, the scavenge pump housing bolts onto the lower 

front face of the accessory case with 6 bolts.  In the parts book, no gasket 

is shown.  In the engine overhaul manual, the instructions tell how to 

install it with no mention of gasket or other joint sealant.



Could someone in the know give me a short talk on how this housing is 

installed where oil doesn't leak.



I have the intake spider and oil return tubes removed for regasketing to 

cure some oil leaks, and am looking at the scavenge pump housing and 

wondering if I should pull it and reseal it somehow while it's accessable, 

but need more ifo.  If it has no gasket, and uses no other sealant, what 

kind of metal to metal fit does it have where oil doesn't leak.



Thanks,



Randy, Las Vegas



1948 Model 35

- The Matronics Beech-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Beech-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Beech-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum