Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Stator coil problem

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> JabiruEngine-List
View previous topic :: View next topic  
Author Message
n282rs(at)satx.rr.com
Guest





PostPosted: Tue Oct 30, 2007 10:12 am    Post subject: Stator coil problem Reply with quote

I flew my plane from San Antonio Texas to Casa Grande AZ to the Copperstate
Fly-in. On the way back the engine developed a whirring noise at low RPM. On
the ground I found that when the prop was pulled through by hand the stator
would jiggle opposite of the prop direction, apparently being pulled toward
the approaching magnet. When I removed the stator assembly, 3 of the stator
mounting screws fell out. They had broken off. The forth screw broke as I
was trying to remove it. I don't see anything loose like a magnet or the
flywheel.

Has anyone experienced this problem in the past? If so what was needed to
keep it from happening again.? At the moment, I'm thinking about getting
stainless steel screws to replace the standard screws that broke. I was also
going to check the flywheel bolts while I have access to them and anything
else I can get my hands on.

Randy Stout
San Antonio TX
www.geocities.com/n282rs
n282rs at satx.rr.com


- The Matronics JabiruEngine-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?JabiruEngine-List
Back to top
dredmoody(at)cox.net
Guest





PostPosted: Tue Oct 30, 2007 11:33 am    Post subject: Stator coil problem Reply with quote

Ask the engine manufacturer what screws to use for the stator. Stainless steel may be weaker than the ones called for. Also ask if a Loctite product (and which one) should be used on those screws.

Was your wife on board this time? She may begin to think she's snake bit.

Dred

---- Randy Stout <n282rs(at)satx.rr.com> wrote:
Quote:




I flew my plane from San Antonio Texas to Casa Grande AZ to the Copperstate
Fly-in. On the way back the engine developed a whirring noise at low RPM. On
the ground I found that when the prop was pulled through by hand the stator
would jiggle opposite of the prop direction, apparently being pulled toward
the approaching magnet. When I removed the stator assembly, 3 of the stator
mounting screws fell out. They had broken off. The forth screw broke as I
was trying to remove it. I don't see anything loose like a magnet or the
flywheel.

Has anyone experienced this problem in the past? If so what was needed to
keep it from happening again.? At the moment, I'm thinking about getting
stainless steel screws to replace the standard screws that broke. I was also
going to check the flywheel bolts while I have access to them and anything
else I can get my hands on.

Randy Stout
San Antonio TX
www.geocities.com/n282rs
n282rs at satx.rr.com









- The Matronics JabiruEngine-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?JabiruEngine-List
Back to top
n282rs(at)satx.rr.com
Guest





PostPosted: Tue Oct 30, 2007 2:18 pm    Post subject: Stator coil problem Reply with quote

No, she's been too sick to fly with me.

Randy

--


- The Matronics JabiruEngine-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?JabiruEngine-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> JabiruEngine-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group