Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Quick build Kit

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Allegro-List
View previous topic :: View next topic  
Author Message
vertcnc



Joined: 16 Jul 2007
Posts: 3
Location: Northern, IL

PostPosted: Fri Nov 02, 2007 5:56 pm    Post subject: Quick build Kit Reply with quote

I was looking at the quick build kit, and was curious your feeling on how complete it is. Besides the poor manual that I have read about here. I have no experience in building airplanes, but good mechanical abilities. I have about 55hrs flying the Allegro 2000 during Sp training and solo and was looking to move forward. Does any one know how many Kits have been sold and flying in the US?

- The Matronics Allegro-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Allegro-List
Back to top
View user's profile Send private message
splashlanding(at)comcast.
Guest





PostPosted: Fri Nov 02, 2007 6:46 pm    Post subject: Quick build Kit Reply with quote

I have no idea how many kits have actually been sold in the U.S., but I
purchased mine almost two years ago at the Sebring, FL Sport Aviation Expo.
You may have read one of my prior messages about the state of the assembly
manual - it left MUCH to the imagination. Maybe by now some changes have
been made. I also had no plane building experience, but consider myself
fairly handy. Had it not been for an Allegro 2000 within flying distance to
use as a reference, I would have been pulling my hair out. As it turned
out, that plane got sold, so we spent quite a bit of time on the phone with
B-Bar-D and found some answers there. This was after photographing every
square inch of what we thought we might need to refer to later on.

The kit was mostly complete, but it was hard to tell this without a
thourough parts list. Many of my parts appeared to have been thrown
together at the last minute without being sorted by category (perhaps in an
effort to make a deadline?). We did have to bother B-Bar-D quite a few
times towards the end for parts that we didn't even know existed until we
got to that particular project. Once again, hopefully Allegro has remedied
this issue.

Now that my plane is completed, I must say that it's gorgeous and I'm glad
we built it. Don't hesitate to take on this project, but be prepared to put
lots more time than advertised into the building process (part of which is
simply "creative solution" time). We have another plane that we were able
to fly in the meantime, so we were still able to get in the air without
renting. Just some things to think about....

Dale Hackworth
Hobe Sound, FL
Allegro 2000
N306AD

---


- The Matronics Allegro-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Allegro-List
Back to top
vertcnc



Joined: 16 Jul 2007
Posts: 3
Location: Northern, IL

PostPosted: Sun Nov 04, 2007 8:47 am    Post subject: Re: Quick build Kit Reply with quote

Thanks Dale,

There is three Allegro 2000 at the airport here that I fly out of, including the one I have trained in. So I should have no problem filling in some of the blanks left out in the manual. Did you find that they would deal at all on the price.

Tim


- The Matronics Allegro-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Allegro-List
Back to top
View user's profile Send private message
splashlanding(at)comcast.
Guest





PostPosted: Sun Nov 04, 2007 4:08 pm    Post subject: Quick build Kit Reply with quote

Tim,

The price of our kit was not negotiable, but who knows?, the dealer in your
area may be willing...

Did anyone else out there negotiate their kit price successfully?

Dale Hackworth
Hobe Sound, FL
Allegro 2000 Amphib
N306AD
---


- The Matronics Allegro-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Allegro-List
Back to top
hgmckay



Joined: 23 May 2006
Posts: 397

PostPosted: Mon Nov 05, 2007 7:31 am    Post subject: Quick build Kit Reply with quote

Just a note to let you know I agree fully with Dale and Amy Hackworth's reply to your question. I have an Allegro 2000 that I built from the Quik-Build Kit, and every thing Amy and Dale described happened to me. I will also tell you that I got little to no support from the US Distributer, Fantasy Air USA. Their main interest is in selling finished ready to fly airplanes, not supporting those of us who want to build one from a kit. It took me two years to finish my airplane, and if this forum had not existed I would have been in deep "yogurt", if you know what I mean. The airplane is a wonderful LSA, and I love to fly mine. It's performance is great, and I think it is one of the sharpest looking LSAs out there. Just be prepared to have a lot of frustration during the building process unless Fantasy Air in the Czech Republic has made a lot of changes, and Fantasy Air USA has changed their ways, which I don't believe they have. If you have any questions I can help you with, j ust em ail me and I will help you, and I am sure others on this forum will do the same.

Hugh McKay in NC
Allegro 2000
Rotax 912 UL
N661WW
hgmckay(at)bellsouth.net (hgmckay(at)bellsouth.net)

se the [quote][b]


- The Matronics Allegro-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Allegro-List
Back to top
View user's profile Send private message
Thom Riddle



Joined: 10 Jan 2006
Posts: 1597
Location: Buffalo, NY, USA (9G0)

PostPosted: Tue Nov 06, 2007 4:52 am    Post subject: Quick build Kit Reply with quote

Fellow Allegro flyers,

I agree with Hugh on his assessment of the situation. We were
fortunate to have purchased one already built and flown for 270 hours
so did not go through the trials of assembling a kit. However, since
ours is the oldest one in service in the USA we've been pioneers on
occasion with getting parts, finding alternate suppliers, and figuring
out how to make repairs.

So, unless a question or response is trul personal, please post all
questions/comments pertaining to Allegros to the list so we can all
benefit from all of our experiences. That is the purpose of this list
and as Hugh has said, its value increases the more we use it.

Thom in Buffalo
Allegro #03-202
N221FA


- The Matronics Allegro-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Allegro-List

_________________
Thom Riddle
Buffalo, NY (9G0)



Don't worry about old age... it doesn't last very long.
- Anonymous
Back to top
View user's profile Send private message Send e-mail
vertcnc



Joined: 16 Jul 2007
Posts: 3
Location: Northern, IL

PostPosted: Thu Nov 08, 2007 7:07 pm    Post subject: Re: Quick build Kit Reply with quote

Thanks for the information.

Tim


- The Matronics Allegro-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Allegro-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Allegro-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group