Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

GL 2FT nose wheel

Matronics Email Lists Forum Index -> Glasair-List

View previous topic :: View next topic

Author Message

Craymondw(at)aol.com
Guest

Posted: Thu Dec 13, 2007 7:33 am Post subject: GL 2FT nose wheel

My nose wheel developed a shimmy so I took apart the nose wheel assembly  and noticed the Allen stop bolt and the wear pad hold on screw were both lose  allowing the plate to move that allowed the nose wheel to easily move  from side to side. The holes in the aluminum plate that the wear pad was  glued to where slightly elongated and part of that wear pad between the bolt and  the screw area delaminated. I would suggest roughing up  the aluminum plate before gluing the wear pad on. I reinstalled the  screw and Allen bolt with star washers. I took the suggestion  about using shims on the axle cap/ shaft assembly so that the long through  bolt could be torque down with the larger axle nut called for by  Glasair Corp.



See AOL's top rated recipes and easy ways to stay in shape for winter.

  [quote][b]

- The Matronics Glasair-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Glasair-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Glasair-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum