Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Tool list for the 601HDS

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Stratus-List
View previous topic :: View next topic  
Author Message
larry(at)macsmachine.com
Guest





PostPosted: Tue Jul 08, 2008 5:36 pm    Post subject: Tool list for the 601HDS Reply with quote

Hi guys,

I just finished an AOPA article on tools for minor emergencies like a
flat tire, cracked canopy, a dinged wing or prop, belt or electrical
problem. I’d started one, but after reading this article I visited
Harbor Freight, O’Rielly’s and Farm and Fleet. The tools, spares, bag,
and rags weigh in at 10lbs. I spent a little over $50.00 for the tools I
didn’t have, bought lightest and least costly where possible and only
good wrenches and sockets where necessary. I looked over my motorcycle
tool kit for what constitutes /essential /before hand. It was probably
worth the effort if only for peace of mind. Do "yard-sale" the sockets
and wrenches that don't fit anything on the plane.

TOOL KIT FOR THE 601HDS w/Stratus Subaru EA-81

Tire inner-tube replacement w/valve core and core removal tool.

Tire gage – slider type 4-inch

Tube silicone sealant

Spark plug gapping tool

Tube anti-seize

6-inch adjustable wrench

Pliers, long nose, duck bill and wire cutter

Vise grips medium

Hammer, Small (kept in the tie-downs bag)

Screw driver, 4-in-1 combination, flat, Phillips, one right angle

Awl, 6-inch, 0 to 5/16-inch-dia.

Hex wrenches, metric and AS

Torque wrench – 3/8-inch max 200 inch-lbs

Feeler gages - set valves

Small open-end wrenches 8mm-19mm

Open-end wrench set 3/8 - ¾-inch

Socket set ¼-inch with medium sockets 1/4-inch thru 3/4-inch

With 3/8 to ¼-inch socket adapter

Spark plug socket 13/16-inch

Batteries 8 pack AA

Flashlight with 2 AA batteries

Voltmeter with continuity tone

Oil Filter wrench strap type with 10-inch x ¼ in dia. extension w/tee

Fuses, 3-5-7.5-10-15-20 amp

Tie-ties, 8-inch 12-pc

Duct tape, new 100-inch roll

.032 safety wire x 36-inch coiled

Hand cleaner packets (10)

Rags – zip locked bagged shop rags and micro-fiber towels 4-each

3-oz sealed container, 10 washers, cotters 2 bolts, 8 screws, 4 nuts,
24-inches Tefzel 16-ga wire and 2-each common electrical terminals. 1
radiator hose elbow, 1 hose clamp, 1 pump belt.

Nylon Bag with zippers and belted nylon handles, 6 x 6 x 13-inches

Total weight = 10-lbs

Each of you would obviously have only similar requirements, so.........
Anyway, do fly safe guys,

Larry McFarland 601HDS at www.macsmachine.com


- The Matronics Stratus-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Stratus-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Stratus-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group