|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
Deems Davis
Joined: 09 Jan 2006 Posts: 925
|
Posted: Thu Mar 02, 2006 3:20 pm Post subject: I'm stumped - Again! |
|
|
OK, I told you its not a rare event !
William, rick, anybody, How did you get the 5 AN470 4-5 rivets that
attach the F-1039D Rudder pedal brace to the stiffener and the firewall
recess???? (sec 27-6) My 3x rivet gun won't fit inside of the recess.The
gusset and diagonal stiffener prohibit getting a back rivet set on them
from the aft side, I'm about ready to use some CS 4-4's and be done with
it. :'(
(Honest, I read the plans this time and I'm still stumped)
Deems Davis # 406
Fuse
http://deemsrv10.com/
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
ron.mcgann(at)baesystems. Guest
|
Posted: Thu Mar 02, 2006 3:49 pm Post subject: I'm stumped - Again! |
|
|
Hi Deems,
I thought I was going to have problems there also, but I managed to shoot them with the flush set. I have the Avery 3x gun, it does not need to fit into the recess. You will need a bucking partner tho', so you can ensure the flush set does not bounce around.
cheers,
Ron
still riveting side skins
--
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
Rick S.
Joined: 12 Feb 2006 Posts: 347 Location: Las Vegas
|
Posted: Thu Mar 02, 2006 4:38 pm Post subject: I'm stumped - Again! |
|
|
Deems,
Try the C-frame tool with the rivet gun attachment, you are talking about the row of rivets above the recess and below the rudder pedal brace right?
Rick S.
40185
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________ Rick S.
RV-10
40185 |
|
Back to top |
|
|
Rick S.
Joined: 12 Feb 2006 Posts: 347 Location: Las Vegas
|
Posted: Thu Mar 02, 2006 4:44 pm Post subject: I'm stumped - Again! |
|
|
FWIW I used the C-frame for the entire firewall short of the ones I could squeeze. Mine came with a set that hold the die, I supported the firewall with foam blocks and essentially back riveted the whole thing with the C-frame.
Rick S.
40185
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________ Rick S.
RV-10
40185 |
|
Back to top |
|
|
Deems Davis
Joined: 09 Jan 2006 Posts: 925
|
Posted: Thu Mar 02, 2006 5:40 pm Post subject: I'm stumped - Again! |
|
|
That worked, I used the swivel head flush set, with my wife bucking and
worked out fine, the one at the very top required finishing with the
double offset back rivet set, as the flush set got close enough to set
it, but not enough to flatten it appropriately.
THANKS
Deems Davis # 406
Fuse
http://deemsrv10.com/
McGANN, Ron wrote:
[quote] Hi Deems,
I thought I was going to have problems there also, but I managed to
shoot them with the flush set. I have the Avery 3x gun, it does not
need to fit into the recess. You will need a bucking partner tho', so
you can ensure the flush set does not bounce around.
cheers,
Ron
still riveting side skins
--
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
wcurtis(at)core.com Guest
|
Posted: Thu Mar 02, 2006 5:40 pm Post subject: I'm stumped - Again! |
|
|
[quote]OK, I told you its not a rare event ! >William, rick, anybody, How did you get the 5 AN470 4-5 rivets >that attach the F-1039D Rudder pedal brace to the stiffener and >the firewall recess???? (sec 27-6) We all get stumped from time to time. I used the Cleveland extra long 12 inch back rivet set on these AN426AD4-5 rivets. You can use this if you do not have the brake (F-6122-1 tri-gear or other) bracket installed. http://wcurtis.nerv10.com/08fuselage/fuselage03u.html William Curtis http://nerv10.com/
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|