|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
moons1999(at)yahoo.com Guest
|
Posted: Mon Mar 06, 2006 7:53 pm Post subject: Elevator Trailing Edge |
|
|
All,
I am about to do my elevator trailing edges and have a quick question. I plan on using the angle iron method (I made a nice proseal mess doing it the Van's way for the rudder) and was wondering about the direction of the rivets. Did everyone set all of the rivets in the same direction so the shop head was on the bottom side or did you still alternate them? I would rather have the shop heads hidden on the bottom but not if there is going to be a problem with it hooking. Thanks.
--Shawn
40366
Yahoo! Mail
Bring photos to life! [url=http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=39174/*http://photomail.mail.yahoo.com]New PhotoMail [/url] makes sharing a breeze.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
ron.mcgann(at)baesystems. Guest
|
Posted: Mon Mar 06, 2006 7:59 pm Post subject: Elevator Trailing Edge |
|
|
I alternated mine on all of the trailing edges (Rudder, el, flaps & ailerons). All came out straight as a die. You can fill the void on the shop head if you are really concerned.
cheers,
Ron
#187 fuse
[quote] --
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
schmoboy
Joined: 26 Feb 2006 Posts: 130
|
Posted: Mon Mar 06, 2006 8:07 pm Post subject: Elevator Trailing Edge |
|
|
I went same side all the way down using the angle iron method. Came out fine.
Choice is yours.
-Sean #40303 (wing bottom skins)
On Mar 6, 2006, at 8:53 PM, Shawn Moon wrote:
Quote: | All,
I am about to do my elevator trailing edges and have a quick question. I plan on using the angle iron method (I made a nice proseal mess doing it the Van's way for the rudder) and was wondering about the direction of the rivets. Did everyone set all of the rivets in the same direction so the shop head was on the bottom side or did you still alternate them? I would rather have the shop heads hidden on the bottom but not if there is going to be a problem with it hooking. Thanks.
--Shawn
40366
Yahoo! Mail
Bring photos to life! [url=http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=39174/*http://photomail.mail.yahoo.com]New PhotoMail [/url] makes sharing a breeze. |
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
Deems Davis
Joined: 09 Jan 2006 Posts: 925
|
Posted: Mon Mar 06, 2006 8:08 pm Post subject: Elevator Trailing Edge |
|
|
I alternated them.
Deems Davis # 406
Fuse
http://deemsrv10.com/
Shawn Moon wrote:
Quote: | All,
I am about to do my elevator trailing edges and have a quick
question. I plan on using the angle iron method (I made a nice
proseal mess doing it the Van's way for the rudder) and was wondering
about the direction of the rivets. Did everyone set all of the rivets
in the same direction so the shop head was on the bottom side or did
you still alternate them? I would rather have the shop heads hidden
on the bottom but not if there is going to be a problem with it
hooking. Thanks.
--Shawn
40366
------------------------------------------------------------------------
Yahoo! Mail
Bring photos to life! New PhotoMail
<http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=39174/*http://photomail.mail.yahoo.com>
makes sharing a breeze.
|
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
LarryRosen
Joined: 16 Jan 2006 Posts: 415 Location: Medford, NJ
|
|
Back to top |
|
|
Tim(at)MyRV10.com Guest
|
Posted: Mon Mar 06, 2006 8:59 pm Post subject: Elevator Trailing Edge |
|
|
I alternated on the rudder for symmetry. I put the flush head on top
for the elevators for cosmetics. Either way will come out
just fine, but the flush heads will look nicer on the elevators for sure.
Tim Olson - RV-10 N104CD - Flying
do not archive
Shawn Moon wrote:
Quote: | All,
I am about to do my elevator trailing edges and have a quick
question. I plan on using the angle iron method (I made a nice proseal
mess doing it the Van's way for the rudder) and was wondering about the
direction of the rivets. Did everyone set all of the rivets in the same
direction so the shop head was on the bottom side or did you still
alternate them? I would rather have the shop heads hidden on the bottom
but not if there is going to be a problem with it hooking. Thanks.
--Shawn
40366
------------------------------------------------------------------------
Yahoo! Mail
Bring photos to life! New PhotoMail
<http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=39174/*http://photomail.mail.yahoo.com>
makes sharing a breeze.
|
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
armywrights(at)adelphia.n Guest
|
Posted: Tue Mar 07, 2006 7:32 pm Post subject: Elevator Trailing Edge |
|
|
Mine are all pointed down, no angle iron method. Thinned the proseal with
some tuolene, used a bunch of weight, all looks good.
Rob #392
Emp Fairings
--
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
moons1999(at)yahoo.com Guest
|
Posted: Wed Mar 08, 2006 7:52 am Post subject: Elevator Trailing Edge |
|
|
Thanks for the replies. Nothing like a unanimous vote! But, since nobody has had any problems with the rivets all facing down I think I will go that route.
--Shawn
40366
"Robert G. Wright" <armywrights(at)adelphia.net> wrote:[quote] --> RV10-List message posted by: "Robert G. Wright"
Mine are all pointed down, no angle iron method. Thinned the proseal with
some tuolene, used a bunch of weight, all looks good.
Rob #392
Emp Fairings
--
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|