Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Zenith750-List Digest: 3 Msgs - 11/11/08

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith750-List
View previous topic :: View next topic  
Author Message
silverbirch1(at)netzero.n
Guest





PostPosted: Wed Nov 12, 2008 2:30 pm    Post subject: Zenith750-List Digest: 3 Msgs - 11/11/08 Reply with quote

Stefan, -- I am building a CH750 from a kit. I have built on the horizontal stabilizer. In fitting the skin I found that the cutouts for the front brackets were about 10mm too far apart. They need to be trimmed inboard about 4mm each to fit over the front brackets.
I have also built up the elevator and trim tab. The manual discusses where to drill and mount the horn angle (75T3-6) in the elevator skeleton section (75-TA3), page 6. The exact location of the horn angle on the spar is critical since it must be flush with the upper horn (75T3-7) and lower horn (75TA-Cool. The upper and lower horns are predrilled. If the horn angle is already drilled to A5, as instructed, there is little room for adjustment when attaching the elevator horns. The horns should likely be clecoed to the skeleton and the horn angle positioned before the horn angle is drilled, at least to A5 size.
Thank you for your web site Stefan.


_____________________________________________________________
Compete with the big boys. Click here to find products to benefit your business.
[quote][b]


- The Matronics Zenith750-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith750-List
Back to top
Stefan



Joined: 30 Sep 2008
Posts: 59

PostPosted: Fri Nov 14, 2008 5:21 pm    Post subject: Re: CH750 kit Reply with quote

Thanks,

Appreciate the feedback. There are some issues with the current manual. Will have a correction page up on the website tonight.

Stefan


- The Matronics Zenith750-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith750-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith750-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group