|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
jesse(at)itecusa.org Guest
|
Posted: Mon Mar 13, 2006 8:09 am Post subject: Wiring Diagram Software |
|
|
Does anybody know of a free CAD program that can import the wiring diagrams from AeroElectric.com and edit them? Still needing the Van’s wiring diagram as well, if anybody has it.
Do not archive
Thanks.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
I'm in Ecuador right now and should be back in the country by the end of May. You may call me at 352-505-1899 and leave a message that I can check from down here. Any I-TEC questions can be directed to the I-TEC office at 352-465-4545.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
johnwcox(at)pacificnw.com Guest
|
Posted: Mon Mar 13, 2006 7:46 pm Post subject: Wiring Diagram Software |
|
|
Dan you might have tried sending it direct to Jesse rather than world wide. No yelling needed.
John
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Monday, March 13, 2006 10:38 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I know I am going to get yelled at for this, but seeing how you are way down south here is the PDF of the wiring harness, it is 1.4mg, so should not be too bad for the dialup guys.
Sorry before hand, but want to help a fellow RV'r out.
Dan
Do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Monday, March 13, 2006 11:08 AM
To: rv10-list(at)matronics.com
Subject: Wiring Diagram Software
Does anybody know of a free CAD program that can import the wiring diagrams from AeroElectric.com and edit them? Still needing the Van’s wiring diagram as well, if anybody has it.
Do not archive
Thanks.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
I'm in Ecuador right now and should be back in the country by the end of May. You may call me at 352-505-1899 and leave a message that I can check from down here. Any I-TEC questions can be directed to the I-TEC office at 352-465-4545.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
jdalton77(at)comcast.net Guest
|
Posted: Mon Mar 13, 2006 8:25 pm Post subject: Wiring Diagram Software |
|
|
I really thought it was great info - if he had sent it directly none of us would have known about it.
[quote] ---
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
capsteve
Joined: 09 Jan 2006 Posts: 111 Location: NIAGARA FALLS NY
|
Posted: Mon Mar 13, 2006 10:38 pm Post subject: Wiring Diagram Software |
|
|
If dan had replied directly, I may not have known of, or benefited from his efforts of scanning the electrical prints. I have found them tremendously helpful in planning at my stage of construction. Thanks for risking life and limb and posting.
Steven DiNieri
40205
--
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
acs(at)acspropeller.com.a Guest
|
|
Back to top |
|
|
LloydDR(at)wernerco.com Guest
|
Posted: Tue Mar 14, 2006 5:51 am Post subject: Wiring Diagram Software |
|
|
I did try that first and got the repeat back that it had bounced, and with him in Ecuador, building a 10, I tried to get it to him ASAP so he was not delayed.
I apologize to the others on the list, but it was a last ditch effort to help Jesse down south.
Dan
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John W. Cox
Sent: Monday, March 13, 2006 10:46 PM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
Dan you might have tried sending it direct to Jesse rather than world wide. No yelling needed.
John
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Monday, March 13, 2006 10:38 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I know I am going to get yelled at for this, but seeing how you are way down south here is the PDF of the wiring harness, it is 1.4mg, so should not be too bad for the dialup guys.
Sorry before hand, but want to help a fellow RV'r out.
Dan
Do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Monday, March 13, 2006 11:08 AM
To: rv10-list(at)matronics.com
Subject: Wiring Diagram Software
Does anybody know of a free CAD program that can import the wiring diagrams from AeroElectric.com and edit them? Still needing the Van’s wiring diagram as well, if anybody has it.
Do not archive
Thanks.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
I'm in Ecuador right now and should be back in the country by the end of May. You may call me at 352-505-1899 and leave a message that I can check from down here. Any I-TEC questions can be directed to the I-TEC office at 352-465-4545.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
rvbuilder(at)sausen.net Guest
|
Posted: Tue Mar 14, 2006 6:14 am Post subject: Wiring Diagram Software |
|
|
That' interesting that it would bounce direct but not via the list as it's going to the same address. Jesse, are you building another -10 that you need this stuff? Also, check the Aeroelectric list for info on CAD programs, they have had lots of discussions on that exact subject and you should be able to find a couple of low cost solutions.
Michael Sausen
RV-10 #352 Working on Fuselage
Do Not Archive
Recent RV-10 Build Activity
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Tuesday, March 14, 2006 7:50 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I did try that first and got the repeat back that it had bounced, and with him in Ecuador, building a 10, I tried to get it to him ASAP so he was not delayed.
I apologize to the others on the list, but it was a last ditch effort to help Jesse down south.
Dan
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John W. Cox
Sent: Monday, March 13, 2006 10:46 PM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
Dan you might have tried sending it direct to Jesse rather than world wide. No yelling needed.
John
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Monday, March 13, 2006 10:38 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I know I am going to get yelled at for this, but seeing how you are way down south here is the PDF of the wiring harness, it is 1.4mg, so should not be too bad for the dialup guys.
Sorry before hand, but want to help a fellow RV'r out.
Dan
Do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Monday, March 13, 2006 11:08 AM
To: rv10-list(at)matronics.com
Subject: Wiring Diagram Software
Does anybody know of a free CAD program that can import the wiring diagrams from AeroElectric.com and edit them? Still needing the Van’s wiring diagram as well, if anybody has it.
Do not archive
Thanks.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
I'm in Ecuador right now and should be back in the country by the end of May. You may call me at 352-505-1899 and leave a message that I can check from down here. Any I-TEC questions can be directed to the I-TEC office at 352-465-4545.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
jjessen(at)rcn.com Guest
|
Posted: Tue Mar 14, 2006 6:25 am Post subject: Wiring Diagram Software |
|
|
Hey, Dan, no worries. We've all been very "good" about not distributing electronic pages of the plans, as we should continue to be. This was an exceptional case and you took the initiative. I for one am glad you did. Time to move on.
John Jessen
~328 (almost out of buildus interruptus)
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Tuesday, March 14, 2006 8:50 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I did try that first and got the repeat back that it had bounced, and with him in Ecuador, building a 10, I tried to get it to him ASAP so he was not delayed.
I apologize to the others on the list, but it was a last ditch effort to help Jesse down south.
Dan
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John W. Cox
Sent: Monday, March 13, 2006 10:46 PM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
Dan you might have tried sending it direct to Jesse rather than world wide. No yelling needed.
John
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Monday, March 13, 2006 10:38 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I know I am going to get yelled at for this, but seeing how you are way down south here is the PDF of the wiring harness, it is 1.4mg, so should not be too bad for the dialup guys.
Sorry before hand, but want to help a fellow RV'r out.
Dan
Do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Monday, March 13, 2006 11:08 AM
To: rv10-list(at)matronics.com
Subject: Wiring Diagram Software
Does anybody know of a free CAD program that can import the wiring diagrams from AeroElectric.com and edit them? Still needing the Van’s wiring diagram as well, if anybody has it.
Do not archive
Thanks.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
I'm in Ecuador right now and should be back in the country by the end of May. You may call me at 352-505-1899 and leave a message that I can check from down here. Any I-TEC questions can be directed to the I-TEC office at 352-465-4545.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
LloydDR(at)wernerco.com Guest
|
Posted: Tue Mar 14, 2006 6:39 am Post subject: Wiring Diagram Software |
|
|
It is not too strange, The matronics server will accept it and post it to the group, and then the individual mailboxes have to download, where if you send it direct, it goes to a different server. So with that being said if it gets to the list server, you can log into the web interface and get it downloaded, even if your local mail provider will not allow attachments over 1meg. Two different servers, two different sets of rules.
Clear as mud, right?
Dan
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder (Michael Sausen)
Sent: Tuesday, March 14, 2006 9:13 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
That' interesting that it would bounce direct but not via the list as it's going to the same address. Jesse, are you building another -10 that you need this stuff? Also, check the Aeroelectric list for info on CAD programs, they have had lots of discussions on that exact subject and you should be able to find a couple of low cost solutions.
Michael Sausen
RV-10 #352 Working on Fuselage
Do Not Archive
Recent RV-10 Build Activity
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Tuesday, March 14, 2006 7:50 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I did try that first and got the repeat back that it had bounced, and with him in Ecuador, building a 10, I tried to get it to him ASAP so he was not delayed.
I apologize to the others on the list, but it was a last ditch effort to help Jesse down south.
Dan
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John W. Cox
Sent: Monday, March 13, 2006 10:46 PM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
Dan you might have tried sending it direct to Jesse rather than world wide. No yelling needed.
John
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Monday, March 13, 2006 10:38 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I know I am going to get yelled at for this, but seeing how you are way down south here is the PDF of the wiring harness, it is 1.4mg, so should not be too bad for the dialup guys.
Sorry before hand, but want to help a fellow RV'r out.
Dan
Do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Monday, March 13, 2006 11:08 AM
To: rv10-list(at)matronics.com
Subject: Wiring Diagram Software
Does anybody know of a free CAD program that can import the wiring diagrams from AeroElectric.com and edit them? Still needing the Van’s wiring diagram as well, if anybody has it.
Do not archive
Thanks.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
I'm in Ecuador right now and should be back in the country by the end of May. You may call me at 352-505-1899 and leave a message that I can check from down here. Any I-TEC questions can be directed to the I-TEC office at 352-465-4545.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
jesse(at)itecusa.org Guest
|
Posted: Wed Mar 15, 2006 4:43 pm Post subject: Wiring Diagram Software |
|
|
Yes, I and 5 other guys are building 2 more down here in Ecuador to teach some indigenous friends of ours a trade. I am having the time of my life, although trying to explain how to rivet a nutplate in two languages beside English is a bit of a challenge.
Do not archive.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
I'm in Ecuador right now and should be back in the country by the end of May. You may call me at 352-505-1899 and leave a message that I can check from down here. Any I-TEC questions can be directed to the I-TEC office at 352-465-4545.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder (Michael Sausen)
Sent: Tuesday, March 14, 2006 9:13 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
That' interesting that it would bounce direct but not via the list as it's going to the same address. Jesse, are you building another -10 that you need this stuff? Also, check the Aeroelectric list for info on CAD programs, they have had lots of discussions on that exact subject and you should be able to find a couple of low cost solutions.
Michael Sausen
RV-10 #352 Working on Fuselage
Do Not Archive
Recent RV-10 Build Activity
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Tuesday, March 14, 2006 7:50 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I did try that first and got the repeat back that it had bounced, and with him in Ecuador, building a 10, I tried to get it to him ASAP so he was not delayed.
I apologize to the others on the list, but it was a last ditch effort to help Jesse down south.
Dan
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John W. Cox
Sent: Monday, March 13, 2006 10:46 PM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
Dan you might have tried sending it direct to Jesse rather than world wide. No yelling needed.
John
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Monday, March 13, 2006 10:38 AM
To: rv10-list(at)matronics.com
Subject: RE: Wiring Diagram Software
I know I am going to get yelled at for this, but seeing how you are way down south here is the PDF of the wiring harness, it is 1.4mg, so should not be too bad for the dialup guys.
Sorry before hand, but want to help a fellow RV'r out.
Dan
Do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Monday, March 13, 2006 11:08 AM
To: rv10-list(at)matronics.com
Subject: Wiring Diagram Software
Does anybody know of a free CAD program that can import the wiring diagrams from AeroElectric.com and edit them? Still needing the Van’s wiring diagram as well, if anybody has it.
Do not archive
Thanks.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
I'm in Ecuador right now and should be back in the country by the end of May. You may call me at 352-505-1899 and leave a message that I can check from down here. Any I-TEC questions can be directed to the I-TEC office at 352-465-4545.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|