bakerocb
Joined: 15 Jan 2006
Posts: 727
Location: FAIRFAX VA
|
 Posted: Fri Jun 05, 2009 4:09 am Post subject: Machine Screw Tip |
 |
|
5/30/2009
Hello Matt, Thanks for your tool tip. Here is another tip that you can
distribute to the RV people if you will (I am not on their lists).
Where ever possible abandon those abominable Phillips drive machine screws.
Instead use Torx (six lobe) drive machine screws.
Every builder who has done this has thanked me profusely for the suggestion.
Torx drive inserts are readily available and with an electric cordless screw
driver are very quick and effective -- vastly superior to Phillips drive.
You can obtain Torx drive screws in a variety of sizes from Microfasteners.
See here:
http://www.microfasteners.com/catalog/products/SSCFCMXS.cfm
(Note that these flat head screws have a true aviation use 100 degree
countersink angle, not the common hardware store 82 degree countersink
angle)
and here:
http://www.microfasteners.com/catalog/products/SSCSBXS.cfm
'OC' Says: "The best investment we can make is the effort to gather and
understand knowledge."
PS: Thanks again Matt for making the Matronics lists available to us -- they
are of great value.
==============================================
| | - The Matronics RV12-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV12-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
