Matronics Email Lists :: View topic - Where & how to run strobe light wiring?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Where & how to run strobe light wiring?

Matronics Email Lists Forum Index -> Zenith750-List

View previous topic :: View next topic

Author Message

ideaz1(at)sbcglobal.net
Guest

Posted: Wed Feb 03, 2010 5:03 pm Post subject: Where & how to run strobe light wiring?

I'm not started with my 750 yet, but it will be my third build. I put wires

on the main spar previously since it is closest to the balance point (yes

that's a bit anal) my other suggestion is to ty wrap only as far in as you

can reach in case you ever have to replace a wire. Also I have installed

wiring after the fact by sliding a length of 1/2" pvc tubing through the

wing, then run the wire through that till you can get hold of the other end

then pull out the tubing leaving the wire(s) behind.

Dirk Z.

Carson City, NV



I'm ready to rivet the bottom side of my trailing edge on my first wing, but

need to run wiring for the wingtip strobe. Anyone have a photo of how &

where they ran these wires? I assume they go down the trailing edge cavity

attached to the aft side of the rear spar, rather than in front of the main

spar. 



Jimmy Young

- The Matronics Zenith750-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith750-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith750-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum