 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
joemotis(at)gmail.com
Guest
|
 Posted: Sun Feb 07, 2010 4:06 pm Post subject: Fwd: Possible mistake upper spar cap CH 750 75-W-2 Illustrat |
 |
|
---------- Forwarded message ----------
From: joe motis <joemotis(at)gmail.com (joemotis(at)gmail.com)>
Date: Sun, Feb 7, 2010 at 3:09 PM
Subject: Fwd: Possible mistake upper spar cap CH 750 75-W-2 Illustration 2 Angle dimension given is 40 mm should be 52 mm?
To: joe motis <joemotis(at)gmail.com (joemotis(at)gmail.com)>
Hi Listers,
I am building the wing spars and I made both upper spar caps with a 40 mm diimension on the angle cut end. It does not fit the way it is supposed to. The actual measurement needs to be 52 mm. The 80 mm up and 272 mm over dimension have both been checked and are correct for the spar angle.
Anyone else have this issue?.
Page 75-W-2 Illustration 2 Upper spar cap
Thanks
Joe Motis
CH 750 WW Corvair
| | - The Matronics Zenith750-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith750-List |
|
| Description: |
|
| Filesize: |
336.22 KB |
| Viewed: |
2539 Time(s) |
|
|
|
| Back to top |
|
 |
ifly4fun2(at)sbcglobal.ne
Guest
|
| Posted: Mon Feb 08, 2010 4:54 am Post subject: Fwd: Possible mistake upper spar cap CH 750 75-W-2 Illustrat |
|
|
Joe,
Great catch and likely only something a scratch builder would have caught. I'm not as far a long as you are but I've made note to cut the upper spar cap angle using the web as the guide. Thank you for passing along your finding.
Art
Wichita, KS
do not archive
--- On Sun, 2/7/10, joe motis <joemotis(at)gmail.com>wrote:
| Quote: |
From: joe motis <joemotis(at)gmail.com>
Subject: Fwd: Possible mistake upper spar cap CH 750 75-W-2 Illustration 2 Angle dimension given is 40 mm should be 52 mm?
To: zenith750-list(at)matronics.com
Date: Sunday, February 7, 2010, 5:11 PM
---------- Forwarded message ----------
From: joe motis <[url=/mc/compose?to=joemotis(at)gmail.com]joemotis(at)gmail.com[/url]>
Date: Sun, Feb 7, 2010 at 3:09 PM
Subject: Fwd: Possible mistake upper spar cap CH 750 75-W-2 Illustration 2 Angle dimension given is 40 mm should be 52 mm?
To: joe motis <[url=/mc/compose?to=joemotis(at)gmail.com]joemotis(at)gmail.com[/url]>
Hi Listers,
I am building the wing spars and I made both upper spar caps with a 40 mm diimension on the angle cut end. It does not fit the way it is supposed to. The actual measurement needs to be 52 mm. The 80 mm up and 272 mm over dimension have both been checked and are correct for the spar angle.
Anyone else have this issue?.
Page 75-W-2 Illustration 2 Upper spar cap
Thanks
Joe Motis
CH 750 WW Corvair
|
[quote][b]
| | - The Matronics Zenith750-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith750-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
