Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

601 XL Autopilot

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
tonyplane(at)bellsouth.ne
Guest





PostPosted: Wed Jan 11, 2006 6:47 am    Post subject: 601 XL Autopilot Reply with quote


Gig and Craig,
Pictures sent sepcor shows how I installed the servo. Looking back, I
probably would have mounted it on the floor on my added .032 flanged skin
doubler. My thinking at the time was if I mounted it up, I would have
better access to it. I have added a couple of stiffener straps since the
pics were taken to limit the movement of the serve, to lessen any possible
"tail wagging the dog" effect.
It is really neat flying xcountry with an AP. Last Saturday is used it on a
70NM trip with about a 40kt cross wind at altitude, and it tracked true to
GPS course line. The airplane nose was pointed about 15 degrees off the
course line. This makes for a different perspective relative to what the
GPS screen shows and what you see out the canopy - if you do not account for
the nose being pointed off.
Take Care,
Tony Graziano
601XL, N493TG - 60+ hrs.
-----------------------
Time: 11:53:45 AM PST US
Subject: re: 601 XL Autopilot?
From: "Gig Giacona" <wr.giacona(at)cox.net>
Tony, do you have any photos of the servos mounted in your plane? I'm
thinking
I'll go with the Trio and would like to see the installation
Time: 12:47:01 PM PST US
From: "Craig Payne" <craig(at)craigandjean.com>
Subject: RE: re: 601 XL Autopilot?
Somebody (possibly Tony) sent me some pictures of servos in a 601 but now I
can't find them. They may have been for a different AP but that doesn't
matter because the servos of the different manufactures are roughly laid out
the same. If any one has pictures e-mail them to me and I'll put then in the
photo archive.
-- Craig


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group