Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Rotax 503

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Rans-List
View previous topic :: View next topic  
Author Message
mred1951



Joined: 27 May 2010
Posts: 2
Location: Pa

PostPosted: Wed Jun 02, 2010 6:34 pm    Post subject: Rotax 503 Reply with quote

Had a melted piston belt was loose. Rebuilt the engine new crank, 2 1 over pistons new heads. Bored the cylinders to min amount, went through the 1 hour run up the engine got tight. Took it apart and bored it to the max amount. Broke it in for the hour recommend runup added extra oil for the breakin. Everything ok flew for one hour it stoped , ended up in a barley field. Took engine apart and the skirts of the piston are damaged. Like there was no lube. Use AV2 lube has anybody ever had this problem?? Ed 717-725-4866

- The Matronics Rans-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rans-List
Back to top
View user's profile Send private message Yahoo Messenger
K Dilks



Joined: 22 Sep 2008
Posts: 108
Location: UK

PostPosted: Mon Jun 14, 2010 5:46 am    Post subject: Re: Rotax 503 Reply with quote

What piston to cylinder clearance did you have when you rebored it?
Did you chamfer the port edges?


- The Matronics Rans-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rans-List

_________________
Back home .................
Back to top
View user's profile Send private message
mred1951



Joined: 27 May 2010
Posts: 2
Location: Pa

PostPosted: Tue Jun 15, 2010 5:34 pm    Post subject: Re: Rotax 503 Reply with quote

The first time we bored it to the mim amount then we bored it to the max amount . we are using av 2 cps oil and we added a coffee cup more to each 5 gal. I am sure they chamfered the edges. When it got tight I was on the bottom tank which had a richer oil mixture. I had flown for about hour on the top tank which was the 50 to 1 mixture. when I switched to the bottom tank with more oil it lasted about 10 minutes . order 2 new pistons will try a new oil with 100 to 1 mixture. Lock Leaf told my rebuilder that there has been some issues with adding to much Av-2 oil during break in .

- The Matronics Rans-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rans-List
Back to top
View user's profile Send private message Yahoo Messenger
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Rans-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group