Matronics Email Lists :: View topic

Matronics Email Lists
BBS Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Tail Section Hinges

Matronics Email Lists Forum Index -> Pietenpol-List

View previous topic :: View next topic

Author Message

tdudley57@gmail.com

Joined: 22 Aug 2010
Posts: 66

Posted: Wed Feb 09, 2011 2:40 pm Post subject: Tail Section Hinges

Worried about the tail hinges (and metal work in general), I looked for and found a privately-owned welding shop about ten miles from my home.  I showed one of the employees the plan for the tail section hinges.  He brought me into the shop and made a hinge from scratch in under 30 minutes while I watched (the final product would be a bit more fine-tuned).  He told me that he'd be able to build them for me if I wanted, but better yet, he told me he'd help me make all the pieces myself.  I'd pay him by the hour to help, but that included all the tools for cutting, bending, drilling, and TIG welding the pieces.  His estimate was really reasonable.



You've just got to love small shops in rural Minnesota.

TRIAL HINGE.jpg

Description:

Filesize:

110.23 KB

Viewed:

1840 Time(s)

TRIAL HINGE 2.jpg

Description:

Filesize:

104.78 KB

Viewed:

1840 Time(s)

Ryan Mueller

Joined: 16 Jul 2007
Posts: 1171
Location: Urbana, IL

Posted: Wed Feb 09, 2011 2:55 pm Post subject: Tail Section Hinges

About $60 in a check to Vi Kapler, and no more worries on your part.



Ryan

do not archive



On Wed, Feb 9, 2011 at 4:40 PM, tdudley(at)umn.edu (tdudley(at)umn.edu) <tdudley(at)umn.edu (tdudley(at)umn.edu)> wrote:

 [quote]--> Pietenpol-List message posted by: "tdudley(at)umn.edu (tdudley(at)umn.edu)" <tdudley(at)umn.edu (tdudley(at)umn.edu)>

  

 Worried about the tail hinges (and metal work in general), I looked for and found a privately-owned welding shop about ten miles from my home.  I showed one of the employees the plan for the tail section hinges.  He brought me into the shop and made a hinge from scratch in under 30 minutes while I watched (the final product would be a bit more fine-tuned).  He told me that he'd be able to build them for me if I wanted, but better yet, he told me he'd help me make all the pieces myself.  I'd pay him by the hour to help, but that included all the tools for cutting, bending, drilling, and TIG welding the pieces.  His estimate was really reasonable.

  

 You've just got to love small shops in rural Minnesota.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=330338#330338

 

 

 

 

 Attachments:

 

 http://forums.matronics.com//files/trial_hinge_120.jpg

 http://forums.matronics.com//files/trial_hinge_2_868.jpg

 

 

 

 

 ===========

 st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List

 ===========

 http://forums.matronics.com

 ===========

 le, List Admin.

 ="_blank">http://www.matronics.com/contribution

 ===========

 

 

 

 [b]

tdudley57@gmail.com

Joined: 22 Aug 2010
Posts: 66

Posted: Wed Feb 09, 2011 3:13 pm Post subject: Re: Tail Section Hinges

$60 is all Vi Kapler charges for the tail section hinges? What about the other metal parts? Contact #'s?

echobravo4

Joined: 09 Apr 2010
Posts: 119
Location: Downingtown, PA

Posted: Wed Feb 09, 2011 3:42 pm Post subject: Re: Tail Section Hinges

Here is is info-



Vitalis Kapler 

507-288-3322

1033 Forest Hills Dr. SW

Rochester, MN 55902



I ordered mine a couple of months ago and they were $70

_________________
Earl Brown

I may not have gone where I intended to go, but I think I have ended up where I intended to be.

gboothe5(at)comcast.net
Guest

Posted: Wed Feb 09, 2011 4:06 pm Post subject: Tail Section Hinges

T



Just curious...is there a reason why you cannot do the fittings, or do not

want to? All it takes is band saw with a metal cutting blade and a gas

welding set up (well, and a few other items). I know welding sounds

daunting, but, believe me, it's one of the most rewarding parts of the whole

project!



Gary Boothe



--

K5YAC

Joined: 18 Feb 2009
Posts: 931
Location: Owasso, Oklahoma

Posted: Wed Feb 09, 2011 4:23 pm Post subject: Re: Tail Section Hinges

Yep, got mine from Vi at Brodhead for $70. They are nice.  I agree that they would be easy to make, but his are ready to mount... all I had to do was router the recess and drill mounting holes.

_________________
Mark Chouinard
Wings, Center Section and Empannage and Fuse framed up - Working on Landing Gear
www.mykitlog.com/k5yac
http://www.westcoastpiet.com/images/Mark%20Chouinard/pictures.htm

tdudley57@gmail.com

Joined: 22 Aug 2010
Posts: 66

Posted: Wed Feb 09, 2011 4:28 pm Post subject: Re: Tail Section Hinges

Gary,



I do want to make the metal fittings; I want to do everything I can on this project.  After meeting with the guy this morning, I got the impression I'd be able to build the parts myself with his assistance.   That's the part that got me excited.



I'd guess that with a little early mentorship in the welding department, I'd gain the skills needed to get most of the other parts done.  I believe you when you say learning the skill is very rewarding.



Tom

tdudley57@gmail.com

Joined: 22 Aug 2010
Posts: 66

Posted: Wed Feb 09, 2011 4:30 pm Post subject: Re: Tail Section Hinges

Mark,



Maybe in direct contrast to my last post, what was the turn around time to get the hinges?  Does Vi supply all metal parts?



Tom

K5YAC

Joined: 18 Feb 2009
Posts: 931
Location: Owasso, Oklahoma

Posted: Wed Feb 09, 2011 4:44 pm Post subject: Re: Tail Section Hinges

In my experience, turn around was quick... as quick I could count out three 20s and a 10, we shook hands and I told him Thanks!  He had the hinges for sale at Brodhead.  



Give him a call.... maybe he has a set or two ready to ship.

tdudley57@gmail.com

Joined: 22 Aug 2010
Posts: 66

Posted: Wed Feb 09, 2011 4:46 pm Post subject: Re: Tail Section Hinges

Mark,



I should have realized that before I posted--I did read you got it from him at Brodhead.



Tom

gboothe5(at)comcast.net
Guest

Posted: Wed Feb 09, 2011 4:50 pm Post subject: Tail Section Hinges

Oh...and I purchased the VK hinges, despite what I just said! Happy building!



Gary

---

tdudley57@gmail.com

Joined: 22 Aug 2010
Posts: 66

Posted: Wed Feb 09, 2011 5:08 pm Post subject: Re: Tail Section Hinges

So Gary, you're saying it wouldn't be too much a compromise to buy the hinges?    Glad to hear it.   I just got off the phone with Mr. Kapler.  He said he could send them to me this week.  (I'll build the other metal parts!) 



Kind of interesting--Vi said he bought one of his Piets from Ed Sampson in Bellview, MN.  I spoke with Ed on the phone a few weeks ago and he said I could drive down to visit with him and talk building.  Ed apparently built the Piet fuse at the EAA museum.  Lots of Piet knowledge within easy driving distance.



Tom

gboothe5(at)comcast.net
Guest

Posted: Wed Feb 09, 2011 5:25 pm Post subject: Tail Section Hinges

You're in good hands! See you at Brodhead?



Gary

---

bickers.ken(at)gmail.com
Guest

Posted: Wed Feb 09, 2011 6:12 pm Post subject: Tail Section Hinges

Another reason for buying the Vi Kapler hinges, even if you could make

them yourself, is that it is a tangible way to have a connection back to Mr

kevinpurtee

Joined: 04 Dec 2008
Posts: 644
Location: Austin/San Marcos, TX

Posted: Thu Feb 10, 2011 1:02 am Post subject: Re: Tail Section Hinges

There are still a WHOLE BUNCH of metal pieces to make even after you've paid Mr. Kappler for the hinges.  



Use the guy for mentorship/training on the other pieces, Tom.  Looks like a great resource.



Kevin

_________________
Kevin "Axel" Purtee
Rebuilding NX899KP
Austin/San Marcos, TX

at7000ft

Joined: 14 Apr 2006
Posts: 1025
Location: Colorado

Posted: Thu Feb 10, 2011 8:44 am Post subject: Tail Section Hinges

Agreed, you will like the Kapler hinges.



On Wed, Feb 9, 2011 at 3:52 PM, Ryan Mueller <rmueller23(at)gmail.com (rmueller23(at)gmail.com)> wrote:

  	  Quote: 	
		  About $60 in a check to Vi Kapler, and no more worries on your part.



Ryan

 



do not archive



On Wed, Feb 9, 2011 at 4:40 PM, tdudley(at)umn.edu (tdudley(at)umn.edu) <tdudley(at)umn.edu (tdudley(at)umn.edu)> wrote:

  

 	  Quote: 	
		  --> Pietenpol-List message posted by: "tdudley(at)umn.edu (tdudley(at)umn.edu)" <tdudley(at)umn.edu (tdudley(at)umn.edu)>

   

 Worried about the tail hinges (and metal work in general), I looked for and found a privately-owned welding shop about ten miles from my home.  I showed one of the employees the plan for the tail section hinges.  He brought me into the shop and made a hinge from scratch in under 30 minutes while I watched (the final product would be a bit more fine-tuned).  He told me that he'd be able to build them for me if I wanted, but better yet, he told me he'd help me make all the pieces myself.  I'd pay him by the hour to help, but that included all the tools for cutting, bending, drilling, and TIG welding the pieces.  His estimate was really reasonable.

   

 You've just got to love small shops in rural Minnesota.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=330338#330338

 

 

 

 

 Attachments:

 

 http://forums.matronics.com//files/trial_hinge_120.jpg

 http://forums.matronics.com//files/trial_hinge_2_868.jpg

 

 

 

 



 ===========

 st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List

 ===========

 http://forums.matronics.com

 ===========

 le, List Admin.

 ="_blank">http://www.matronics.com/contribution

 ===========

 

 

 

 	




   	  Quote: 	
		  



" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	




	


-- 

Rick Holland

Castle Rock, Colorado



"A Foolish Consistency is the Hobgoblin of Little Minds" 

  [quote][b]

_________________
Rick Holland

Display posts from previous:

	Matronics Email Lists Forum Index -> Pietenpol-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum