bertrv6(at)gmail.com
Guest
|
 Posted: Tue May 24, 2011 1:53 pm Post subject: RV6-List Digest: 3 Msgs - 05/22/11 |
 |
|
of course, yes yes
On Mon, May 23, 2011 at 3:00 AM, RV6-List Digest Server
<rv6-list(at)matronics.com> wrote:
| Quote: | *
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete RV6-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the RV6-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 11-05-22&Archive=RV6
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 11-05-22&Archive=RV6
================================================
EMail Version of Today's List Digest Archive
================================================
----------------------------------------------------------
RV6-List Digest Archive
---
Total Messages Posted Sun 05/22/11: 3
----------------------------------------------------------
Today's Message Index:
----------------------
1. 05:46 AM - Avery Rudder Cable Fairing (colleenandbrett(at)comcast.net)
2. 06:21 AM - Re: Avery Rudder Cable Fairing (Jeff Orear)
3. 08:37 AM - Re: Avery Rudder Cable Fairing (John Brunke)
________________________________ Message 1 _____________________________________
Time: 05:46:55 AM PST US
From: colleenandbrett(at)comcast.net
Subject: Avery Rudder Cable Fairing
When installing the Avery Rudder Cable Fairing, does one still install the bolt
/ clamp to retain / locate the 3/8" diameter polyethylene tube as shown on drawing
# 34 or does this fairing alone pushing against this tube provide sufficient
retention?
Thanks.
Brett
Columbus, IN
RV-6AQ Installing the rudder cables
________________________________ Message 2 _____________________________________
Time: 06:21:43 AM PST US
Subject: Re: Avery Rudder Cable Fairing
From: Jeff Orear <jorear(at)new.rr.com>
Brett, I installed both the clamp and fairing. More structurally sound and r
etains the poly tube much better than relying on the fairing alone.
Best Regards,
Jeff Orear
RV6A N782P
Peshtigo, WI
Sent from my iPad
On May 22, 2011, at 7:43 AM, colleenandbrett(at)comcast.net wrote:
> When installing the Avery Rudder Cable Fairing, does one still install the
bolt / clamp to retain / locate the 3/8" diameter polyethylene tube as show
n on drawing # 34 or does this fairing alone pushing against this tube provi
de sufficient retention?
>
> Thanks.
>
> Brett
>
> Columbus, IN
>
> RV-6AQ Installing the rudder cables
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
________________________________ Message 3 _____________________________________
Time: 08:37:59 AM PST US
From: John Brunke <jdoody727(at)comcast.net>
Subject: Re: Avery Rudder Cable Fairing
I second Jeff's installation. You would hate for something to jam back
there someday if the tubing came loose.
John Brunke
RV7QB slow build.
Saint Charles, IL
On May 22, 2011, at 8:20 AM, Jeff Orear wrote:
> Brett, I installed both the clamp and fairing. More structurally
sound and retains the poly tube much better than relying on the fairing
alone.
>
> Best Regards,
>
> Jeff Orear
> RV6A N782P
> Peshtigo, WI
>
> Sent from my iPad
>
> On May 22, 2011, at 7:43 AM, colleenandbrett(at)comcast.net wrote:
>
>> When installing the Avery Rudder Cable Fairing, does one still
install the bolt / clamp to retain / locate the 3/8" diameter
polyethylene tube as shown on drawing # 34 or does this fairing alone
pushing against this tube provide sufficient retention?
>>
>>
>> Thanks.
>>
>>
>> Brett
>>
>> Columbus, IN
>>
>> RV-6AQ Installing the rudder cables
>>
>>
>>
>>
>>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
|
| | - The Matronics RV6-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV6-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
