 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
otto(at)otamat.com
Guest
|
 Posted: Mon Sep 26, 2011 11:53 am Post subject: Parting out my Pulsar3 |
 |
|
Hi Max,
please advise details of the Ivoprop hub and controls.
Regards
Otto
On 26/09/2011 20:09, Max wrote: [quote] | Quote: | --> Pulsar-List message posted by: "Max" <max(at)spro.net> (max(at)spro.net)
Pulsar Builders,
I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It
has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland
dual brake system, axles, wheels and tires, Whelen Nav lights and strobes,
and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade
configuration. If you have interest in something, let me know, and I will
provide more specific Info.
Max Boesiger
Coldwell Banker
(208) 250-6234
|
[b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
 |
lwheat2083(at)gmail.com
Guest
|
| Posted: Mon Sep 26, 2011 12:46 pm Post subject: Parting out my Pulsar3 |
|
|
Max: I am in the process of building a Pulsar III. What parts of the fuselage and wings, wheel pants etc do you have. Was the airplane damaged? To what extent. I am located in MOses Lake, Washington and was thinking about spares. Thanks in advance. Cheers
On Mon, Sep 26, 2011 at 12:09 PM, Max <max(at)spro.net (max(at)spro.net)> wrote:
| Quote: | --> Pulsar-List message posted by: "Max" <max(at)spro.net (max(at)spro.net)>
Pulsar Builders,
I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It
has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland
dual brake system, axles, wheels and tires, Whelen Nav lights and strobes,
and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade
configuration. If you have interest in something, let me know, and I will
provide more specific Info.
Max Boesiger
Coldwell Banker
(208) 250-6234http://www.matronics.com/Navigator?Pulsar-List
ronics.com/" target="_blank">http://forums.matronics.com
Matt Dralle, List Admin.
=====
|
--
Larry Wheat
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
docyukon(at)ptcnet.net
Guest
|
| Posted: Mon Sep 26, 2011 4:59 pm Post subject: Parting out my Pulsar3 |
|
|
Max Do you have the four wing spar mounting bolts? Bill S . Pulsar lll Kit #17
[quote] ---
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
otto(at)otamat.com
Guest
|
| Posted: Tue Sep 27, 2011 12:57 am Post subject: Parting out my Pulsar3 |
|
|
Hi Max,
do you still have the Ivoprop hub and controls? Please advise.
Regards
Otto
On 26/09/2011 20:09, Max wrote: [quote] | Quote: | --> Pulsar-List message posted by: "Max" <max(at)spro.net> (max(at)spro.net)
Pulsar Builders,
I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It
has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland
dual brake system, axles, wheels and tires, Whelen Nav lights and strobes,
and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade
configuration. If you have interest in something, let me know, and I will
provide more specific Info.
Max Boesiger
Coldwell Banker
(208) 250-6234
|
[b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
lwheat2083(at)gmail.com
Guest
|
| Posted: Tue Sep 27, 2011 8:14 am Post subject: Parting out my Pulsar3 |
|
|
No, but thanks for the reply. If you can I would like to know what happened to your aircraft. Thanks, Larry
On Mon, Sep 26, 2011 at 5:41 PM, Max <max(at)spro.net (max(at)spro.net)> wrote:
| Quote: |
Larry,
I'm afraid there isn't much left of the fuselage and wings. All was damaged enough that they aren't worth the effort (and weight) to fix. I do have the upper cowl piece. I have a complete panel that was designed and assembled by Gulf Coast Avionics. Are you interested in any of that?
Max Boesiger
[url=tel:%28208%29%20250-6234](208) 250-6234[/url]
From: owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com) [mailto:owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)] On Behalf Of Larry Wheat
Sent: Monday, September 26, 2011 2:45 PM
To: pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)
Subject: Re: Parting out my Pulsar3
Max: I am in the process of building a Pulsar III. What parts of the fuselage and wings, wheel pants etc do you have. Was the airplane damaged? To what extent. I am located in MOses Lake, Washington and was thinking about spares. Thanks in advance. Cheers
On Mon, Sep 26, 2011 at 12:09 PM, Max <max(at)spro.net (max(at)spro.net)> wrote:
--> Pulsar-List message posted by: "Max" <max(at)spro.net (max(at)spro.net)>
Pulsar Builders,
I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It
has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland
dual brake system, axles, wheels and tires, Whelen Nav lights and strobes,
and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade
configuration. If you have interest in something, let me know, and I will
provide more specific Info.
Max Boesiger
Coldwell Banker
(208) 250-6234
s.com/Navigator?Pulsar-List" target="_blank">http://www.matronics.com/Navigator?Pulsar-List
ronics.com/" target="_blank">http://forums.matronics.com
Matt Dralle, List Admin.
=====
--
Larry Wheat 0 12345 67
8
|
--
Larry Wheat
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
mboesiger
Joined: 26 Sep 2011
Posts: 17
Location: Boise, Idaho
|
| Posted: Tue Sep 27, 2011 11:22 am Post subject: Parting out my Pulsar3 |
|
|
Mine were getting pretty badly worn, so I threw them away.
Max Boesiger
Coldwell Banker
(208) 250-6234
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of Bill S
Sent: Monday, September 26, 2011 6:59 PM
To: pulsar-list(at)matronics.com
Subject: Re: Parting out my Pulsar3
Max Do you have the four wing spar mounting bolts? Bill S . Pulsar lll Kit #17
[quote]
---
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
_________________
I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
|
| Back to top |
|
|
mboesiger
Joined: 26 Sep 2011
Posts: 17
Location: Boise, Idaho
|
| Posted: Tue Sep 27, 2011 11:33 am Post subject: Parting out my Pulsar3 |
|
|
Larry,
I had to make a night forced landing in a very remote part of Idaho. I had gone off course and didn't realize it until I was nearly out of fuel. I was unable to make it back to an airport. My Pulsar ran just fine untill it ran out of fuel. I was unhurt in the landing thanks to the "crash tolerant" design.
Max Boesiger
Coldwell Banker
(208) 250-6234
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of Larry Wheat
Sent: Tuesday, September 27, 2011 10:13 AM
To: pulsar-list(at)matronics.com
Subject: Re: Parting out my Pulsar3
No, but thanks for the reply. If you can I would like to know what happened to your aircraft. Thanks, Larry
On Mon, Sep 26, 2011 at 5:41 PM, Max <max(at)spro.net (max(at)spro.net)> wrote:
Larry,
I'm afraid there isn't much left of the fuselage and wings. All was damaged enough that they aren't worth the effort (and weight) to fix. I do have the upper cowl piece. I have a complete panel that was designed and assembled by Gulf Coast Avionics. Are you interested in any of that?
Max Boesiger
[url=tel:%28208%29%20250-6234](208) 250-6234[/url]
From: owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com) [mailto:owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)] On Behalf Of Larry Wheat
Sent: Monday, September 26, 2011 2:45 PM
To: pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)
Subject: Re: Parting out my Pulsar3
Max: I am in the process of building a Pulsar III. What parts of the fuselage and wings, wheel pants etc do you have. Was the airplane damaged? To what extent. I am located in MOses Lake, Washington and was thinking about spares. Thanks in advance. Cheers
On Mon, Sep 26, 2011 at 12:09 PM, Max <max(at)spro.net (max(at)spro.net)> wrote:
--> Pulsar-List message posted by: "Max" <max(at)spro.net (max(at)spro.net)>
Pulsar Builders,
I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It
has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland
dual brake system, axles, wheels and tires, Whelen Nav lights and strobes,
and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade
configuration. If you have interest in something, let me know, and I will
provide more specific Info.
Max Boesiger
Coldwell Banker
(208) 250-6234
s.com/Navigator?Pulsar-List" target="_blank">http://www.matronics.com/Navigator?Pulsar-List
ronics.com/" target="_blank">http://forums.matronics.com
Matt Dralle, List Admin.
=====
--
Larry Wheat
| Quote: | | arget="_blank">http://www.matronics.com/Navigator?Pulsar-Listttp://forums.matronics.com |
01
--
Larry Wheat234567890123456789
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
_________________
I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
|
| Back to top |
|
|
mboesiger
Joined: 26 Sep 2011
Posts: 17
Location: Boise, Idaho
|
| Posted: Tue Sep 27, 2011 12:18 pm Post subject: Re: Parting out my Pulsar3 |
|
|
I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link
http://s1180.photobucket.com/albums/x402/mboesiger/
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
_________________
I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
|
| Back to top |
|
|
otto(at)otamat.com
Guest
|
| Posted: Tue Sep 27, 2011 12:31 pm Post subject: Parting out my Pulsar3 |
|
|
I have seen the picture of your prop hub, but I cannot tell what kind it is. I may be interested in the radiator also.
thaks
otto
On 27/09/2011 21:18, mboesiger wrote: [quote] [b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
otto(at)otamat.com
Guest
|
| Posted: Tue Sep 27, 2011 12:43 pm Post subject: Parting out my Pulsar3 |
|
|
Is it the same as Bernie Berger's prop hub?
otto
On 27/09/2011 21:18, mboesiger wrote: [quote] [b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
pulsar1(at)sbcglobal.net
Guest
|
| Posted: Tue Sep 27, 2011 12:55 pm Post subject: Parting out my Pulsar3 |
|
|
I'm installing an IVO prop and was wondering if you used the IVO spinner or the Pulsar spinner. If you used the Pulsar spinner how did you install it?
Thanks George
From: otto souta <otto(at)otamat.com>
To: pulsar-list(at)matronics.com
Sent: Tue, September 27, 2011 1:31:25 PM
Subject: Re: Re: Parting out my Pulsar3
I have seen the picture of your prop hub, but I cannot tell what kind it is. I may be interested in the radiator also.
thaks
otto
On 27/09/2011 21:18, mboesiger wrote: [quote][b][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
mboesiger
Joined: 26 Sep 2011
Posts: 17
Location: Boise, Idaho
|
| Posted: Tue Sep 27, 2011 1:02 pm Post subject: Parting out my Pulsar3 |
|
|
Probably, but can't say for sure. The guys at Ivoprop might know.
Max Boesiger
Coldwell Banker
(208) 250-6234
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of otto souta
Sent: Tuesday, September 27, 2011 2:44 PM
To: pulsar-list(at)matronics.com
Subject: Re: Re: Parting out my Pulsar3
Is it the same as Bernie Berger's prop hub?
otto
On 27/09/2011 21:18, mboesiger wrote: | Quote: | | --> Pulsar-List message posted by: "mboesiger" <max(at)spro.net> (max(at)spro.net) I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link http://s1180.photobucket.com/albums/x402/mboesiger/ --------I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
0123456789 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
0 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
1 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
2 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
3 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
4 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
5 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
6 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
7
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
_________________
I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
|
| Back to top |
|
|
mboesiger
Joined: 26 Sep 2011
Posts: 17
Location: Boise, Idaho
|
| Posted: Tue Sep 27, 2011 1:17 pm Post subject: Parting out my Pulsar3 |
|
|
I ordered the spinner from Aircraft Spruce, and it fit perfectly. I wish I could find the part number, but it was just one they had in stock.
Max Boesiger
Coldwell Banker
(208) 250-6234
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of George Gennuso
Sent: Tuesday, September 27, 2011 2:55 PM
To: pulsar-list(at)matronics.com
Subject: Re: Re: Parting out my Pulsar3
I'm installing an IVO prop and was wondering if you used the IVO spinner or the Pulsar spinner. If you used the Pulsar spinner how did you install it?
Thanks George
From: otto souta <otto(at)otamat.com>
To: pulsar-list(at)matronics.com
Sent: Tue, September 27, 2011 1:31:25 PM
Subject: Re: Re: Parting out my Pulsar3
I have seen the picture of your prop hub, but I cannot tell what kind it is. I may be interested in the radiator also.
thaks
otto
On 27/09/2011 21:18, mboesiger wrote: | Quote: | | --> Pulsar-List message posted by: "mboesiger" <max(at)spro.net> (max(at)spro.net) I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link http://s1180.photobucket.com/albums/x402/mboesiger/ --------I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
0123456789 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
0 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
1 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
2 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
3 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
4 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
5 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
6 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
7 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
8 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
90123456789012
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
_________________
I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
|
| Back to top |
|
|
pilot623(at)gmail.com
Guest
|
| Posted: Tue Sep 27, 2011 1:19 pm Post subject: Parting out my Pulsar3 |
|
|
I've ridden in both Max's and Bernie's planes and am sure they are both the Magnum prop with two blades. Ivo recommended that configuration for the 914 while they suggested the Medium with three blades (smaller chord blades) for the 80 and 100 hp Rotax engines.
Jim
| Quote: | From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of Max
Sent: Tuesday, September 27, 2011 4:01 PM
To: pulsar-list(at)matronics.com
Subject: RE: Re: Parting out my Pulsar3
Probably, but can't say for sure. The guys at Ivoprop might know.
Max Boesiger
Coldwell Banker
(208) 250-6234
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of otto souta
Sent: Tuesday, September 27, 2011 2:44 PM
To: pulsar-list(at)matronics.com
Subject: Re: Re: Parting out my Pulsar3
Is it the same as Bernie Berger's prop hub?
otto
On 27/09/2011 21:18, mboesiger wrote: | Quote: | | --> Pulsar-List message posted by: "mboesiger" <max(at)spro.net> (max(at)spro.net) I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link http://s1180.photobucket.com/albums/x402/mboesiger/ --------I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
0123456789 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
0 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
1 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
2 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
3 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
4 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
5 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
6 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
7
| Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
8 |
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
bberger4(at)tampabay.rr.c
Guest
|
| Posted: Tue Sep 27, 2011 1:48 pm Post subject: Parting out my Pulsar3 |
|
|
Regarding the prop spinner; I ordered mine from Spruce. It was the BN2. Traced the shape of the prop and cut out the openings. Saved the cutouts and made the backside for the back of the prop. Was going to have it polished alunimum but lost control, the spinner got slightly dented so it got painted.
Bernie
Sent from my Verizon iPhone
On Sep 27, 2011, at 4:54 PM, George Gennuso <pulsar1(at)sbcglobal.net (pulsar1(at)sbcglobal.net)> wrote:
[quote]I'm installing an IVO prop and was wondering if you used the IVO spinner or the Pulsar spinner. If you used the Pulsar spinner how did you install it?
Thanks George
From: otto souta <otto(at)otamat.com (otto(at)otamat.com)>
To: [url=mailto:pulsar-list(at)matronics.com]pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)[/url]
Sent: Tue, September 27, 2011 1:31:25 PM
Subject: Re: Re: Parting out my Pulsar3
I have seen the picture of your prop hub, but I cannot tell what kind it is. I may be interested in the radiator also.
thaks
otto
On 27/09/2011 21:18, mboesiger wrote:
[b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
bberger4(at)tampabay.rr.c
Guest
|
| Posted: Tue Sep 27, 2011 2:07 pm Post subject: Parting out my Pulsar3 |
|
|
Max's build preceeded me by at least a year. I decided on the same prop as Max because the bugs had been worked out. Max and IVO had resolved what combination of hub blade size and number of blades were optimum out the issues so i bought the same setup as Max.
Bernie
Sent from my Verizon iPhone
On Sep 27, 2011, at 5:18 PM, "pilot623" <pilot623(at)gmail.com (pilot623(at)gmail.com)> wrote:
[quote] I've ridden in both Max's and Bernie's planes and am sure they are both the Magnum prop with two blades. Ivo recommended that configuration for the 914 while they suggested the Medium with three blades (smaller chord blades) for the 80 and 100 hp Rotax engines.
Jim
| Quote: | From: owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com) [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of Max
Sent: Tuesday, September 27, 2011 4:01 PM
To: [url=mailto:pulsar-list(at)matronics.com]pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)[/url]
Subject: RE: Pulsar-List: Re: Parting out my Pulsar3
Probably, but can't say for sure. The guys at Ivoprop might know.
Max Boesiger
Coldwell Banker
(208) 250-6234
From: owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com) [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of otto souta
Sent: Tuesday, September 27, 2011 2:44 PM
To: [url=mailto:pulsar-list(at)matronics.com]pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)[/url]
Subject: Re: Pulsar-List: Re: Parting out my Pulsar3
Is it the same as Bernie Berger's prop hub?
otto
On 27/09/2011 21:18, mboesiger wrote: | Quote: | | --> Pulsar-List message posted by: "mboesiger" <[url=mailto:max(at)spro.net]max(at)spro.net (max(at)spro.net)>[/url] I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link http://s1180.photobucket.com/albums/x402/mboesiger/ --------I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho |
0123456789 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
0 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
1 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
2 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
3 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
4 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
5 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
6 | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
7
[url=http://www.matronics.com/contribution][/url] | Quote: | | I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
8I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link |
9
[b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
lwheat2083(at)gmail.com
Guest
|
| Posted: Tue Sep 27, 2011 3:19 pm Post subject: Parting out my Pulsar3 |
|
|
Well, that really sucks. Glad to hear you didn't have any injuries. Be safe. Cheers, Larry
On Tue, Sep 27, 2011 at 12:32 PM, Max <max(at)spro.net (max(at)spro.net)> wrote:
| Quote: |
Larry,
I had to make a night forced landing in a very remote part of Idaho. I had gone off course and didn't realize it until I was nearly out of fuel. I was unable to make it back to an airport. My Pulsar ran just fine untill it ran out of fuel. I was unhurt in the landing thanks to the "crash tolerant" design.
Max Boesiger
Coldwell Banker
[url=tel:%28208%29%20250-6234](208) 250-6234[/url]
From: owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com) [mailto:owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)] On Behalf Of Larry Wheat
Sent: Tuesday, September 27, 2011 10:13 AM
To: pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)
Subject: Re: Pulsar-List: Parting out my Pulsar3
No, but thanks for the reply. If you can I would like to know what happened to your aircraft. Thanks, Larry
On Mon, Sep 26, 2011 at 5:41 PM, Max <max(at)spro.net (max(at)spro.net)> wrote:
Larry,
I'm afraid there isn't much left of the fuselage and wings. All was damaged enough that they aren't worth the effort (and weight) to fix. I do have the upper cowl piece. I have a complete panel that was designed and assembled by Gulf Coast Avionics. Are you interested in any of that?
Max Boesiger
[url=tel:%28208%29%20250-6234](208) 250-6234[/url]
From: owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com) [mailto:owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)] On Behalf Of Larry Wheat
Sent: Monday, September 26, 2011 2:45 PM
To: pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)
Subject: Re: Parting out my Pulsar3
Max: I am in the process of building a Pulsar III. What parts of the fuselage and wings, wheel pants etc do you have. Was the airplane damaged? To what extent. I am located in MOses Lake, Washington and was thinking about spares. Thanks in advance. Cheers
On Mon, Sep 26, 2011 at 12:09 PM, Max <max(at)spro.net (max(at)spro.net)> wrote:
--> Pulsar-List message posted by: "Max" <max(at)spro.net (max(at)spro.net)>
Pulsar Builders,
I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It
has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland
dual brake system, axles, wheels and tires, Whelen Nav lights and strobes,
and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade
configuration. If you have interest in something, let me know, and I will
provide more specific Info.
Max Boesiger
Coldwell Banker
(208) 250-6234
s.com/Navigator?Pulsar-List" target="_blank">http://www.matronics.com/Navigator?Pulsar-List
ronics.com/" target="_blank">http://forums.matronics.com
Matt Dralle, List Admin.
=====
--
Larry Wheat
0 1
--
Larry Wheat23456789 012 34567 89
0
|
--
Larry Wheat
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
