Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

RV14-List Digest: 2 Msgs - 01/07/13

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV14-List
View previous topic :: View next topic  
Author Message
bucker131(at)comcast.net
Guest





PostPosted: Tue Jan 08, 2013 6:11 am    Post subject: RV14-List Digest: 2 Msgs - 01/07/13 Reply with quote

Hi gang.

I'm Gordon, in Lawrenceville, Ga. Been working on my 14 wing kit for a week. Spar is done, rib prep in progress.

When not doing that, I fly my Bücker Jüngmann biplane, and some corporate jets.

Sent from me

On Jan 8, 2013, at 2:57 AM, RV14-List Digest Server <rv14-list(at)matronics.com> wrote:

Quote:
*

==================================================
Online Versions of Today's List Digest Archive
==================================================

Today's complete RV14-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the RV14-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 13-01-07&Archive=RV14

Text Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 13-01-07&Archive=RV14


================================================
EMail Version of Today's List Digest Archive
================================================


----------------------------------------------------------
RV14-List Digest Archive
---
Total Messages Posted Mon 01/07/13: 2
----------------------------------------------------------


Today's Message Index:
----------------------

1. 06:26 AM - Thanks for the list Matt! - Plans Rev. pg 11-03 (Tim Olson)
2. 07:00 AM - Re: Thanks for the list Matt! - Plans Rev. pg 11-03 (Dave Saylor)



________________________________ Message 1 _____________________________________


Time: 06:26:14 AM PST US
From: Tim Olson <Tim(at)MyRv10.com>
Subject: Thanks for the list Matt! - Plans Rev. pg 11-03


Thanks to Matt for setting up an RV-14 email list. Those of you
on this list (maybe very few at this point) who know me, know
that I prefer email based lists...the messages pop into
your inbox where you can address them quickly. It makes for
a speedy way to pass along info.

I'm builder 140032, and got my kit 12/21/2012. So far I'm done
with section 11 and 1/2 way through 12 almost. I find that the
RV-14 plans in some cases so far, are perhaps a little more
vague than the RV-10, although the kit itself has some nice
little improvements. In the section on countersinking the spar
in section 11, they do show the max depth and width of the
countersinks you create, but, they don't go into detail as to
what the ultimate goal of the countersunk hole will be. In the
-10 plans they have you test dimple a scrap of aluminum so that
you get the depth to a workable depth for assembly later.
Anyway, it does take a little interpreting and reading ahead
if you're a 1st time builder. I have a website regarding
my RV-10 at http://www.MyRV10.com, and although I still update
it, it won't be changing drastically in the future. I also
have one set up for the RV-14 at http://www.MyRV14.com that
I will use to document the build, but I will not be spending
nearly the time writing as I did on the other plane. I probably
have as much time into writing as building on that kit.

I did have one plans correction I found, and Van's has already
changed it on their plans, but it somehow didn't make it into
my plans when they shipped just a few weeks ago. On page 11-03
the "AFT / UP / Inboard" label was wrong in 2 diagrams, but
they have it changed now to "FWD / UP / Inboard", so they were
already on it. I'm sure we'll find more changes as we go
through the build.

I just wanted to make a quick introduction and let anyone
else who signed on the list know that I'll be monitoring
the list, so email here when you run into questions or issues.

Tim
RV-10 N104CD


________________________________ Message 2 _____________________________________


Time: 07:00:26 AM PST US
From: Dave Saylor <dave.saylor.aircrafters(at)gmail.com>
Subject: Re: Thanks for the list Matt! - Plans Rev. pg 11-03

Hi Tim, can't wait to see your progress.

Anyone else wish there was a 540 option?

Dave Saylor
831-750-0284 CL


On Mon, Jan 7, 2013 at 6:26 AM, Tim Olson <Tim(at)myrv10.com> wrote:

>
> Thanks to Matt for setting up an RV-14 email list. Those of you
> on this list (maybe very few at this point) who know me, know
> that I prefer email based lists...the messages pop into
> your inbox where you can address them quickly. It makes for
> a speedy way to pass along info.
>
> I'm builder 140032, and got my kit 12/21/2012. So far I'm done
> with section 11 and 1/2 way through 12 almost. I find that the
> RV-14 plans in some cases so far, are perhaps a little more
> vague than the RV-10, although the kit itself has some nice
> little improvements. In the section on countersinking the spar
> in section 11, they do show the max depth and width of the
> countersinks you create, but, they don't go into detail as to
> what the ultimate goal of the countersunk hole will be. In the
> -10 plans they have you test dimple a scrap of aluminum so that
> you get the depth to a workable depth for assembly later.
> Anyway, it does take a little interpreting and reading ahead
> if you're a 1st time builder. I have a website regarding
> my RV-10 at http://www.MyRV10.com, and although I still update
> it, it won't be changing drastically in the future. I also
> have one set up for the RV-14 at http://www.MyRV14.com that
> I will use to document the build, but I will not be spending
> nearly the time writing as I did on the other plane. I probably
> have as much time into writing as building on that kit.
>
> I did have one plans correction I found, and Van's has already
> changed it on their plans, but it somehow didn't make it into
> my plans when they shipped just a few weeks ago. On page 11-03
> the "AFT / UP / Inboard" label was wrong in 2 diagrams, but
> they have it changed now to "FWD / UP / Inboard", so they were
> already on it. I'm sure we'll find more changes as we go
> through the build.
>
> I just wanted to make a quick introduction and let anyone
> else who signed on the list know that I'll be monitoring
> the list, so email here when you run into questions or issues.
>
> Tim
> RV-10 N104CD










- The Matronics RV14-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV14-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV14-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group