Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Aw: Re: erratic oil temperature indication

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> LycomingEngines-List
View previous topic :: View next topic  
Author Message
Markus



Joined: 08 Jan 2012
Posts: 8

PostPosted: Wed Jul 22, 2015 5:30 am    Post subject: Aw: Re: erratic oil temperature indication Reply with quote

Thanks to all for your suggestions! I´ll have a closer look at the probe and cables and check for good connection at the instrument terminals.
 
Regards,
Markus
 

 
On Mon, Jul 20, 2015 at 9:51 AM, Carl Froehlich <carl.froehlich(at)verizon.net> wrote:

Probe.  If you have a connector in line with the probe you might get lucky and find that is the problem - for that matter look over the probe wire itself to see if it has chaffed or otherwise damaged.

Carl
Quote:
On Jul 20, 2015, at 8:32 AM, Markus Feyerabend <feyerabm(at)web.de[feyerabm(at)web.de]> wrote:



Hello all,

I recently noticed that the oil temp reading in our Extra became erratic and the indication is jumping between about 160°F and 200°F.
The high value seems to be at around the level I expect, while the low level is certainly too low. The needle in the temp gauge (Westach twin indicator for oil pressure and temp) is not moving slowly but jumping quite fast back and forth.
It seemed to be ok when I warmed up the oil on the ground before an oil-change, but in flight (with higher oil temps) the problem came back.

Has anyone seen something like this before and can give some recommendations to what we should look at? I´m suspecting the temp probe right now, but as the plane is more then an hour away from my home, I´d rather get as much suggestions from anyone experienced, before getting lost an endless "trial and error" hunt , chasing the issue.

Thanks,
Markus


===========
rum -
mingEngines-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?LycomingEngines-List[http://www.matronics.com/Navigator?LycomingEngines-List]
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com[http://forums.matronics.com]
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution[http://www.matronics.com/contribution]
===========
 


- The Matronics LycomingEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?LycomingEngines-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> LycomingEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group