Matronics Email Lists :: View topic - Another Cruiser first.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Another Cruiser first.

Matronics Email Lists Forum Index -> KIS-List

View previous topic :: View next topic

Author Message

fredorosa(at)gmail.com
Guest

Posted: Sat Apr 23, 2016 4:52 pm Post subject: Another Cruiser first.

OC,  Here's the stainless leading edges on the tail feathers.The wings will have the same.

I decided to do this because I wanted a different look from the usual white plane with wavy colored lines.

The useful attribute is protection from dings by kicked up pebbles, etc.

Al

IMG_0621.jpg

Description:

Filesize:

1.15 MB

Viewed:

5837 Time(s)

Robert Reed

Joined: 22 Oct 2009
Posts: 331
Location: Dallas/Ft.Worth

Posted: Sun Apr 24, 2016 10:58 am Post subject: Another Cruiser first.

Al 



That looks good and sounds like a great way to protect the leading edges. Where did you get the SS?

Bob Reed

Sent from my iPhone



 	  Quote: 	
		   On Apr 23, 2016, at 7:52 PM, Alfred Rosa <fredorosa(at)gmail.com> wrote:

 

 OC,  Here's the stainless leading edges on the tail feathers.

 The wings will have the same.

 

 I decided to do this because I wanted a different look from the usual white plane with wavy colored lines.

 

 The useful attribute is protection from dings by kicked up pebbles, etc.

 

 Al

 <IMG_0621.jpg>

fredorosa(at)gmail.com
Guest

Posted: Sun Apr 24, 2016 11:43 am Post subject: Another Cruiser first.

Got the SS online from a manufacturer of sheet steel.  It was a 50' roll of 8"cut off.  A bitch to bend lengthwise even though it's thin stuff.  Had to use two angle irons - one on each side - and squeeze together with pipe clamps. I laid a pipe on the SS to help control the shape of the bend. 

Bob, I saw pics of a Lycoming hanging off the nose of your plane on your web site.  I could have sworn you had gotten a Continental. 

Al

Sent from my iPhone

 	  Quote: 	
		   On Apr 24, 2016, at 2:57 PM, Robert Reed <robertr237(at)att.net> wrote:

 Al 

 That looks good and sounds like a great way to protect the leading edges. Where did you get the SS?

 Bob Reed

 Sent from my iPhone

> On Apr 23, 2016, at 7:52 PM, Alfred Rosa <fredorosa(at)gmail.com> wrote:

> 

> OC,  Here's the stainless leading edges on the tail feathers.

> The wings will have the same.

> 

> I decided to do this because I wanted a different look from the usual white plane with wavy colored lines.

> 

> The useful attribute is protection from dings by kicked up pebbles, etc.

> 

> Al

> <IMG_0621.jpg>

Robert Reed

Joined: 22 Oct 2009
Posts: 331
Location: Dallas/Ft.Worth

Posted: Sun Apr 24, 2016 11:54 am Post subject: Another Cruiser first.

That sounds like a lot of work but may be worth the effort if you ever encounter a bird strike. 

Superior IOF-360.  

Bob Reed

Sent from my iPhone

 	  Quote: 	
		   On Apr 24, 2016, at 2:42 PM, Alfred Rosa <fredorosa(at)gmail.com> wrote:

 Got the SS online from a manufacturer of sheet steel.  It was a 50' roll of 8"cut off.  A bitch to bend lengthwise even though it's thin stuff.  Had to use two angle irons - one on each side - and squeeze together with pipe clamps. I laid a pipe on the SS to help control the shape of the bend. 

 Bob, I saw pics of a Lycoming hanging off the nose of your plane on your web site.  I could have sworn you had gotten a Continental. 

 Al

 Sent from my iPhone

> On Apr 24, 2016, at 2:57 PM, Robert Reed <robertr237(at)att.net> wrote:

> 

> 

> 

> Al 

> 

> That looks good and sounds like a great way to protect the leading edges. Where did you get the SS?

> 

> 

> Bob Reed

> Sent from my iPhone

> 

>> On Apr 23, 2016, at 7:52 PM, Alfred Rosa <fredorosa(at)gmail.com> wrote:

>> 

>> OC,  Here's the stainless leading edges on the tail feathers.

>> The wings will have the same.

>> 

>> I decided to do this because I wanted a different look from the usual white plane with wavy colored lines.

>> 

>> The useful attribute is protection from dings by kicked up pebbles, etc.

>> 

>> Al

>> <IMG_0621.jpg>

> 

> 

> 

> 

> 

>

aeromomentum(at)yahoo.com
Guest

Posted: Sun Apr 24, 2016 3:23 pm Post subject: Another Cruiser first.

Another option to get a similar look is stainless steel foil tape:

http://www.ebay.com/itm/15D571-Foil-Tape-3-In-x-3-Yd-Stainless-Steel-/221574057967



I am sure it is not as much protection but it is lighter and more simple to do.



Now put this under it for deicing...

http://www.ebay.com/itm/Flex-Watt-Heat-Tape-Reptile-Pet-Terrarium-Cage-Egg-Incubator-Heater-Warmer-/230921106672



Mark K.



--------------------------------------------

On Sun, 4/24/16, Robert Reed <robertr237(at)att.net> wrote:



 Subject: Re: Another Cruiser first.

 To: kis-list(at)matronics.com

 Date: Sunday, April 24, 2016, 3:54 PM

 

 

 Robert Reed <robertr237(at)att.net>

 

 That sounds like a lot of work but may be worth the effort

 if you ever encounter a bird strike. 

 

 Superior IOF-360.  

 

 Bob Reed

 Sent from my iPhone

 

 > On Apr 24, 2016, at 2:42 PM, Alfred Rosa <fredorosa(at)gmail.com>

 wrote:

 > 

 > 

 > 

 > Got the SS online from a manufacturer of sheet

 steel.  It was a 50' roll of 8"cut off.  A bitch

 to bend lengthwise even though it's thin stuff.  Had to

 use two angle irons - one on each side - and squeeze

 together with pipe clamps. I laid a pipe on the SS to help

 control the shape of the bend. 

 > 

 > Bob, I saw pics of a Lycoming hanging off the nose of

 your plane on your web site.  I could have sworn you

 had gotten a Continental. 

 > 

 > Al

 > 

 > 

 > Sent from my iPhone

 > 

 >> On Apr 24, 2016, at 2:57 PM, Robert Reed <robertr237(at)att.net>

 wrote:

 >> 

 >> 

 <robertr237(at)att.net>

 >> 

 >> Al 

 >> 

 >> That looks good and sounds like a great way to

 protect the leading edges. Where did you get the SS?

 >> 

 >> 

 >> Bob Reed

 >> Sent from my iPhone

 >> 

 >>> On Apr 23, 2016, at 7:52 PM, Alfred Rosa <fredorosa(at)gmail.com>

 wrote:

 >>> 

 >>> OC,  Here's the stainless leading edges on

 the tail feathers.

 >>> The wings will have the same.

 >>> 

 >>> I decided to do this because I wanted a

 different look from the usual white plane with wavy colored

 lines.

 >>> 

 >>> The useful attribute is protection from dings

 by kicked up pebbles, etc.

 >>> 

 >>> Al

 >>> <IMG_0621.jpg>

 >> 

 >> 

 >> 

 >> 

 >> 

 >> 

 > 

 > 

 > 

 > 

 > 

 

 

 

 Forum -

    - MATRONICS WEB FORUMS -

 MATRONICS LIST WIKI -

 List Contribution Web Site -

               -Matt

 Dralle, List Admin.

jerzy_krasinski(at)sbcglo
Guest

Posted: Tue Apr 26, 2016 9:20 am Post subject: Another Cruiser first.

Except, if you do nod blend it perfectly with the rest of the airfoil, for sure it would destroy the laminar flow.That converts into loosing speed....

fredorosa(at)gmail.com
Guest

Posted: Tue Apr 26, 2016 10:52 am Post subject: Another Cruiser first.

Perfect laminar flow does not exist in nature or aircraft .  

On Tue, Apr 26, 2016 at 1:20 PM, jerzy krasinski <jerzy_krasinski(at)sbcglobal.net (jerzy_krasinski(at)sbcglobal.net)> wrote:

 	  Quote: 	
		  Except, if you do nod blend it perfectly with the rest of the airfoil, for sure it would destroy the laminar flow.

That converts into loosing speed.....

Jerzy

    On Sunday, April 24, 2016 2:55 PM, Robert Reed <robertr237(at)att.net (robertr237(at)att.net)> wrote:

 --> KIS-List message posted by: Robert Reed <robertr237(at)att.net (robertr237(at)att.net)>

That sounds like a lot of work but may be worth the effort if you ever encounter a bird strike. 

Superior IOF-360.  

Bob Reed

Sent from my iPhone

 	  Quote: 	
		   On Apr 24, 2016, at 2:42 PM, Alfred Rosa <fredorosa(at)gmail.com (fredorosa(at)gmail.com)> wrote:

 --> KIS-List message posted by: Alfred Rosa <fredorosa(at)gmail.com (fredorosa(at)gmail.com)>

 Got the SS online from a manufacturer of sheet steel.  It was a 50' roll of 8"cut off.  A bitch to bend lengthwise even though it's thin stuff.  Had to use two angle irons - one on each side - and squeeze together with pipe clamps. I laid a pipe on the SS to help control the shape of the bend. 

 Bob, I saw pics of a Lycoming hanging off the nose of your plane on your web site.  I could have sworn you had gotten a Continental. 

 Al

 Sent from my iPhone

> On Apr 24, 2016, at 2:57 PM, Robert Reed <robertr237(at)att.net (robertr237(at)att.net)> wrote:

> 

> --> KIS-List message posted by: Robert Reed <robertr237(at)att.net (robertr237(at)att.net)>

> 

> Al 

> 

> That looks good and sounds like a great way to protect the leading edges. Where did you get the SS?

> 

> 

> Bob Reed

> Sent from my iPhone

> 

>> On Apr 23, 2016, at 7:52 PM, Alfred Rosa <fredorosa(at)gmail.com (fredorosa(at)gmail.com)> wrote:

>> 

>> OC,  Here's the stainless leading edges on the tail feathers.

>> The wings will have the same.

>> 

>> I decided to do this because I wanted a different look from the usual white plane with wavy colored lines.

>> 

>> The useful attribute is protection from dings by kicked up pebbles, etc.

>> 

>> Al

>> <IMG_0621.jpg>

> 

> 

> 

> 

> 

tp://www.matronics.com/Navigator?KIS-List" target="_blank">http://www.matnbsp;                    t; http

Robert Reed

Joined: 22 Oct 2009
Posts: 331
Location: Dallas/Ft.Worth

Posted: Tue Apr 26, 2016 11:49 am Post subject: Another Cruiser first.

I can speak from experience that a dead on bird strike to the leading edge of the wing does in fact destroy the laminar flow along with clean underwear.  It totally flattened the outer most 3 feet of a Cessna 172 wing.  

Bob

      From: jerzy krasinski <jerzy_krasinski(at)sbcglobal.net>

 To: "kis-list(at)matronics.com" <kis-list(at)matronics.com> 

 Sent: Tuesday, April 26, 2016 12:20 PM

 Subject: Re: Another Cruiser first.

Except, if you do nod blend it perfectly with the rest of the airfoil, for sure it would destroy the laminar flow.That converts into loosing speed....

jerzy_krasinski(at)sbcglo
Guest

Posted: Wed Apr 27, 2016 7:14 am Post subject: Another Cruiser first.

All decent  airfoils have laminar flow at the front part, from the nose to the thickest part of the wing.The nose of the airfoil is the most sensitive part and any disturbance there results in turbulent flow.Ask glider pilots. They will tell you that bugs smashed on the front of the wing can significantly reduce  performance of the glider.Supposedly even a color strip painted along the nose of the wing is no good.

Jerzy 



    On Tuesday, April 26, 2016 1:51 PM, Alfred Rosa <fredorosa(at)gmail.com> wrote:

 



 Perfect laminar flow does not exist in nature or aircraft .  

On Tue, Apr 26, 2016 at 1:20 PM, jerzy krasinski <jerzy_krasinski(at)sbcglobal.net> wrote:



Except, if you do nod blend it perfectly with the rest of the airfoil, for sure it would destroy the laminar flow.That converts into loosing speed....

fredorosa(at)gmail.com
Guest

Posted: Wed Apr 27, 2016 11:40 am Post subject: Another Cruiser first.

Many certified planes have tape or de-ice boots on their leading edges. I never heard of losing speed being a concern.



Al



 	  Quote: 	
		  



    	  Quote:

WingTape1.JPG

Description:

Filesize:

1.27 MB

Viewed:

5798 Time(s)

installed-deice-boot.jpg

Description:

Filesize:

12.84 KB

Viewed:

5798 Time(s)

220px-Leading_edge_of_Beechcraft_350ER_(2).jpg

Description:

Filesize:

5.87 KB

Viewed:

5798 Time(s)

220px-Leading_edge_of_Beechcraft_350ER_(2).jpg

aeromomentum(at)yahoo.com
Guest

Posted: Wed Apr 27, 2016 1:23 pm Post subject: Another Cruiser first.

Actually loss of speed is one of the big issues with de-ice boots and there have been many studies of this.  Most modern jets use heat on the leading edge instead of boots for this reason along with others.



Real life laminar flow does commonly happen.  Even in the slip stream of the prop.  The whole idea of a laminar flow airfoil is to extend the amount of laminar flow farther than a conventional airfoil.  Even a conventional airfoil has some laminar flow and to 25% cord or more is typical.



But for many KIS owner/builders the speed is not the end goal and this should not be large.  For others speed is more of the goal.  To each their own and that is why we all end up with different aircraft even when we started with the same kit.



Mark K.



--------------------------------------------

On Wed, 4/27/16, Alfred Rosa <fredorosa(at)gmail.com> wrote:



 Subject: Re: Another Cruiser first.

 To: "kisbuilders" <kis-list(at)matronics.com>

 Date: Wednesday, April 27, 2016, 3:40 PM

 

 Many certified planes

 have tape or de-ice boots on their leading edges. I never

 heard of losing speed being a concern.

 Al

Display posts from previous:

	Matronics Email Lists Forum Index -> KIS-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum