Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Help Needed.......Please

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Avionics-List
View previous topic :: View next topic  
Author Message
spcialeffects



Joined: 29 Aug 2012
Posts: 305
Location: Kent

PostPosted: Sun Jul 31, 2016 8:15 am    Post subject: Help Needed.......Please Reply with quote

Hi all. Im building a Europa which is currently in the body shop getting filled and painted. While thats getting done I'm left with the task iv been putting off for a long time now.......Panel wiring! I have spent about 3 weeks now working out wiring diagrams and schematics but have become stuck on a certain bit which I'm seeking help with on here from more knowledgeable people than I.
I have an Icom A210E, using the 15 pin D sub connector (MB-113) and want to connect it to a PMA8000BT audio panel as a comm 2 unit. With the limited wiring instructions on the icom I'm unable to work out how to wire it to the audio panel.
If anyone here is able to help me please get in touch and help out a very frustrated builder.

Many thanks Frank


- The Matronics Avionics-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List
Back to top
View user's profile Send private message
cbirdsall6(at)cox.net
Guest





PostPosted: Sun Jul 31, 2016 10:14 pm    Post subject: Help Needed.......Please Reply with quote

Frank,

Here's a wire list for the way I would do it (sorry, my computer drawing skills are lacking ...) Please verify signal names and pins:

Icom DB 15 to PMA 8000BT J1

Receive audio (Shielded two-conductor):
Icom pin 14 (Headphones Audio Out +) to J1 pin13 (Com 2 Audio Hi)
Icom pin 13 (Headphones Audio Out -) to J1 pin 14 (Com 2 Audio Lo)

Microphone audio (Shielded three-conductor)
Icom pin 8 (Mic 1 Audio In +) to J1 pin 15 (Com 2 Mic)
Icom pin 7 (Mic 1 Audio -) to ground lug on PMA 8000BT
Icom pin 4 (PTT +*) to J1 pin 30 (Com 2 Mic Key)

Notes:
Connect shields at audio panel end of harness to ground lug on back of PMA 8000BT, leave the shields on the Icom end unconnected
Leave the speaker output from the Icom unconnected
No need for transmit interlock or intercom switch connections, the PMA 8000 will take care of that internally
If you don't have three-conductor wire you can use a single un-shielded wire to connect the PTT/Mic Key line
Chuck
---- spcialeffects <spcialeffects(at)aol.com> wrote:
Quote:


Hi all. Im building a Europa which is currently in the body shop getting filled and painted. While thats getting done I'm left with the task iv been putting off for a long time now.......Panel wiring! I have spent about 3 weeks now working out wiring diagrams and schematics but have become stuck on a certain bit which I'm seeking help with on here from more knowledgeable people than I.
I have an Icom A210E, using the 15 pin D sub connector (MB-113) and want to connect it to a PMA8000BT audio panel as a comm 2 unit. With the limited wiring instructions on the icom I'm unable to work out how to wire it to the audio panel.
If anyone here is able to help me please get in touch and help out a very frustrated builder.

Many thanks Frank




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=458968#458968












- The Matronics Avionics-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List
Back to top
spcialeffects



Joined: 29 Aug 2012
Posts: 305
Location: Kent

PostPosted: Mon Aug 01, 2016 6:01 am    Post subject: Re: Help Needed.......Please Reply with quote

Cant thank you enough Chuck! thank you, thank you, thank you

- The Matronics Avionics-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Avionics-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group