Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Aeroled Aerosun VX

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
whodja



Joined: 27 Jan 2014
Posts: 50
Location: Apex NC (near Raleigh)

PostPosted: Thu Sep 01, 2016 10:57 am    Post subject: Aeroled Aerosun VX Reply with quote

Landing light lens installation kit needs to be modified so the lens fits tight. The edge of the lens tends to protrude and not fit flush on the wing rib side. The outside near the tip seam fits very well. It looks like the only we to make a nice smooth blend from the fiberglass to the lens is to build up the fiberglass. Has anyone had the same issue? Any recommendations on how best to fix the issue?

Working on QB wings


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
Kelly McMullen



Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

PostPosted: Thu Sep 01, 2016 4:06 pm    Post subject: Aeroled Aerosun VX Reply with quote

Sounds like you either did not have lens correctly oriented when you trimmed, or you haven't trimmed enough.

You can get higher quality, already mostly trimmed lens from Cee Bailey division of Desser Tire. They sell pre-trimmed replacement windows and windshield as well.

-sent from the I-chip implanted in my forearm



On Thu, Sep 1, 2016 at 11:57 AM, whodja <whodja(at)gmail.com (whodja(at)gmail.com)> wrote:
Quote:
--> RV10-List message posted by: "whodja" <whodja(at)gmail.com (whodja(at)gmail.com)>

Landing light lens installation kit needs to be modified so the lens fits tight. The edge of the lens tends to protrude and not fit flush on the wing rib side. The outside near the tip seam fits very well. It looks like the only we to make a nice smooth blend from the fiberglass to the lens is to build up the fiberglass. Has anyone had the same issue? Any recommendations on how best to fix the issue?

Working on QB wings




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=460100#460100







====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD
Back to top
View user's profile Send private message
rv10flyer(at)live.com
Guest





PostPosted: Thu Sep 01, 2016 5:00 pm    Post subject: Aeroled Aerosun VX Reply with quote

I completely agree. The quality I also better. I have their lens and windscreen and in both cases it clearer and “feels” more solid. With the lenses and the windscreen they come slightly larger to allow for final trim. It minimal work compared to cutting lenses in half and trimming and way less than the windscreen. In general, I highly recommend the tires, tubes, (basically the RV-10 kit) from Desser and the windows and lenses from Cee baileys, all the same site by the way and skipping the parts sent by Vans in kits.
Equal or less in price than Vans and better quality- also shipping for everything except the windscreen is usually free.
There is a dedicated site for Vans-http://www.vansaircrafttires.com/categories/RV%252d10/

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Kelly McMullen
Sent: Thursday, September 01, 2016 5:05 PM
To: rv10-list(at)matronics.com
Subject: Re: RV10-List: Aeroled Aerosun VX

Sounds like you either did not have lens correctly oriented when you trimmed, or you haven't trimmed enough.

You can get higher quality, already mostly trimmed lens from Cee Bailey division of Desser Tire. They sell pre-trimmed replacement windows and windshield as well.


-sent from the I-chip implanted in my forearm






On Thu, Sep 1, 2016 at 11:57 AM, whodja <whodja(at)gmail.com (whodja(at)gmail.com)> wrote:
--> RV10-List message posted by: "whodja" <whodja(at)gmail.com (whodja(at)gmail.com)>

Landing light lens installation kit needs to be modified so the lens fits tight. The edge of the lens tends to protrude and not fit flush on the wing rib side. The outside near the tip seam fits very well. It looks like the only we to make a nice smooth blend from the fiberglass to the lens is to build up the fiberglass. Has anyone had the same issue? Any recommendations on how best to fix the issue?

Working on QB wings




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=460100#460100







====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================






- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jump2(at)sbcglobal.net
Guest





PostPosted: Thu Sep 01, 2016 5:38 pm    Post subject: Aeroled Aerosun VX Reply with quote

Really how many of vans wind screens and lens have you installed vs Dee bialys have you put in? What, you did one and now your an expert I think not.
Just my 2 cents.

Sent from my iPad

On Sep 1, 2016, at 8:00 PM, P Reid <rv10flyer(at)live.com (rv10flyer(at)live.com)> wrote:
Quote:
<![endif]--> <![endif]-->
I completely agree. The quality I also better. I have their lens and windscreen and in both cases it clearer and “feels” more solid. With the lenses and the windscreen they come slightly larger to allow for final trim. It minimal work compared to cutting lenses in half and trimming and way less than the windscreen. In general, I highly recommend the tires, tubes, (basically the RV-10 kit) from Desser and the windows and lenses from Cee baileys, all the same site by the way and skipping the parts sent by Vans in kits.
Equal or less in price than Vans and better quality- also shipping for everything except the windscreen is usually free.
There is a dedicated site for Vans-http://www.vansaircrafttires.com/categories/RV%252d10/

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Kelly McMullen
Sent: Thursday, September 01, 2016 5:05 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Aeroled Aerosun VX

Sounds like you either did not have lens correctly oriented when you trimmed, or you haven't trimmed enough.

You can get higher quality, already mostly trimmed lens from Cee Bailey division of Desser Tire. They sell pre-trimmed replacement windows and windshield as well.


-sent from the I-chip implanted in my forearm






On Thu, Sep 1, 2016 at 11:57 AM, whodja <whodja(at)gmail.com (whodja(at)gmail.com)> wrote:
--> RV10-List message posted by: "whodja" <whodja(at)gmail.com (whodja(at)gmail.com)>

Landing light lens installation kit needs to be modified so the lens fits tight. The edge of the lens tends to protrude and not fit flush on the wing rib side. The outside near the tip seam fits very well. It looks like the only we to make a nice smooth blend from the fiberglass to the lens is to build up the fiberglass. Has anyone had the same issue? Any recommendations on how best to fix the issue?

Working on QB wings




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=460100#460100







====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================









- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Kelly McMullen



Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

PostPosted: Thu Sep 01, 2016 7:57 pm    Post subject: Aeroled Aerosun VX Reply with quote

Ask Pascal...IIRC he had to replace his Vans windshield. Having done Vans winshield myself, it is nothing to write home about, having replaced a fair number of windows//windshields on certified aircraft.

Kelly

A&P/IA

-sent from the I-chip implanted in my forearm



On Thu, Sep 1, 2016 at 6:36 PM, Patrick Thyssen <jump2(at)sbcglobal.net (jump2(at)sbcglobal.net)> wrote:
Quote:
Really how many of vans wind screens and lens have you installed vs Dee bialys have you put in? What,  you did one and now your an expert I think not.
Just my 2 cents. 

Sent from my iPad

On Sep 1, 2016, at 8:00 PM, P Reid <rv10flyer(at)live.com (rv10flyer(at)live.com)> wrote:
Quote:

I completely agree. The quality I also better. I have their lens and windscreen and in both cases it clearer and “feels” more solid. With the lenses and the windscreen they come slightly larger to allow for final trim. It minimal work compared to cutting lenses in half and trimming and way less than the windscreen. In general, I highly recommend the tires, tubes, (basically the RV-10 kit) from Desser and the windows and lenses from Cee baileys, all the same site by the way and skipping the parts sent by Vans in kits.
Equal or less in price than Vans and better quality- also shipping for everything except the windscreen is usually free.
There is a dedicated site for Vans-http://www.vansaircrafttires.com/categories/RV%252d10/
 
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Kelly McMullen
Sent: Thursday, September 01, 2016 5:05 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Aeroled Aerosun VX
 
Sounds like you either did not have lens correctly oriented when you trimmed, or you haven't trimmed enough.

You can get higher quality, already mostly trimmed lens from Cee Bailey division of Desser Tire. They sell pre-trimmed replacement windows and windshield as well.


-sent from the I-chip implanted in my forearm





 
On Thu, Sep 1, 2016 at 11:57 AM, whodja <whodja(at)gmail.com (whodja(at)gmail.com)> wrote:
--> RV10-List message posted by: "whodja" <whodja(at)gmail.com (whodja(at)gmail.com)>

Landing light lens installation kit needs to be modified so the lens fits tight. The edge of the lens tends to protrude and not fit flush on the wing rib side. The outside near the tip seam fits very well. It looks like the only we to make a nice smooth blend from the fiberglass to the lens is to build up the fiberglass. Has anyone had the same issue? Any recommendations on how best to fix the issue?

Working on QB wings




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=460100#460100







===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========




 





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD
Back to top
View user's profile Send private message
dmaib@me.com



Joined: 25 Apr 2006
Posts: 454
Location: New Smyrna Beach, Florida

PostPosted: Fri Sep 02, 2016 6:22 pm    Post subject: Re: Aeroled Aerosun VX Reply with quote

My windshield install back in '08 was a lot of work. As Tim noted, the right side was not even close to fitting. It took a huge amount of fiberglass work to get it faired in to make it look right. I replaced my landing light lenses a year or two ago due to crazing and fogging. I installed the Cee Bailey lenses and they were very close to a perfect fit. Took very little work and they seem to be a more substantial material and they still look like new. If I had to install another windshield, I would certainly look very closely at Cee Bailey.

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
David Maib
RV-10 #40559
New Smyrna Beach, FL
Back to top
View user's profile Send private message
Albert Gardner



Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ

PostPosted: Sat Sep 03, 2016 9:02 am    Post subject: Aeroled Aerosun VX Reply with quote

My Vans windscreen was Aug 2007. No issues with windows or cowl. I thought
the fit went smoothly except for the Weldon adhesive.
Albert Gardner
RV-10 N9914RV
Yuma, AZ

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV-9A N872RV
RV-10 N991RV
Back to top
View user's profile Send private message Send e-mail
jdriggs49(at)MSN.COM
Guest





PostPosted: Sat Sep 03, 2016 9:26 am    Post subject: Aeroled Aerosun VX Reply with quote

My observation has been that the Van's subcontractors of parts have variable quality control. Some things are pretty good and others are just a big POS! My windows and screen fit pretty well but my nose gear fell (broke) off the plane.
I bought after market fairings from the South Africans because the quality of the kit parts from Vans was so bad. How much effort does it take to get it correct the first time?!?!
The good part is that it has helped establish a good number of boutique parts suppliers. Bad part is that it cost us more.

Sent from my iPhone

[quote] On Sep 3, 2016, at 12:06 PM, Albert <ibspud(at)roadrunner.com> wrote:



My Vans windscreen was Aug 2007. No issues with windows or cowl. I thought
the fit went smoothly except for the Weldon adhesive.
Albert Gardner
RV-10 N9914RV
Yuma, AZ

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group