Matronics Email Lists :: View topic - Built-in Oxygen (Mountain High)

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Built-in Oxygen (Mountain High)

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

philperry9

Joined: 23 Nov 2011
Posts: 380

Posted: Fri Dec 02, 2016 8:36 am Post subject: Built-in Oxygen (Mountain High)

For those of you who have installed the EDS-4ip system from Mountain High, have any of you found a method to shove the tubing over the barbs fully?



I've never given birth to a child, personally, but I'm pretty sure this is what it's like.   



Hopefully there is a well-known lubricant out there that won't damage the electronics inside the distribution units. 



Or perhaps you can give me a tip to become more dilated.   Either way, something has to give. 



Phil



Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Tim Olson

Joined: 25 Jan 2007
Posts: 2871

Posted: Fri Dec 02, 2016 8:59 am Post subject: Built-in Oxygen (Mountain High)

I don't have that system but I've always slightly warmed the tubing with a heat gun....carefully.  I bought some of that tubing type and I think that would help a lot.  Don't warm it too far back or it gets too flexible on the pushing area.

Tim



 	  Quote: 	
		   On Dec 2, 2016, at 10:35 AM, Phillip Perry <philperry9(at)gmail.com> wrote:

 

 

 

 For those of you who have installed the EDS-4ip system from Mountain High, have any of you found a method to shove the tubing over the barbs fully?

 

 I've never given birth to a child, personally, but I'm pretty sure this is what it's like.   

 

 Hopefully there is a well-known lubricant out there that won't damage the electronics inside the distribution units. 

 

 Or perhaps you can give me a tip to become more dilated.   Either way, something has to give. 

 

 Phil

 

 

 

 Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

philperry9

Joined: 23 Nov 2011
Posts: 380

Posted: Fri Dec 02, 2016 9:29 am Post subject: Built-in Oxygen (Mountain High)

That's the secret.   The heat worked. 

We don't plan on having any more kids.  But just in case we do, I'm going to keep a spare heat gun behind the seat of the truck. 

It's way cheaper and faster than medication....

Sent from my iPhone

 	  Quote: 	
		   On Dec 2, 2016, at 10:58 AM, Tim Olson <Tim(at)MyRV10.com> wrote:

 I don't have that system but I've always slightly warmed the tubing with a heat gun....carefully.  I bought some of that tubing type and I think that would help a lot.  Don't warm it too far back or it gets too flexible on the pushing area.

 Tim

> On Dec 2, 2016, at 10:35 AM, Phillip Perry <philperry9(at)gmail.com> wrote:

> 

> 

> 

> For those of you who have installed the EDS-4ip system from Mountain High, have any of you found a method to shove the tubing over the barbs fully?

> 

> I've never given birth to a child, personally, but I'm pretty sure this is what it's like.   

> 

> Hopefully there is a well-known lubricant out there that won't damage the electronics inside the distribution units. 

> 

> Or perhaps you can give me a tip to become more dilated.   Either way, something has to give. 

> 

> Phil

> 

> 

> 

> Sent from my iPhone

> 

> 

>

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

flying-nut(at)cfl.rr.com
Guest

Posted: Fri Dec 02, 2016 9:42 am Post subject: Built-in Oxygen (Mountain High)

Not familiar with the system specifically, but when faced with barbed 

fittings I dip the ends of the tubing in boiling water and the barbs 

seem to go in easily.

Linn

On 12/2/2016 11:35 AM, Phillip Perry wrote:

 	  Quote: 	
		   



 For those of you who have installed the EDS-4ip system from Mountain High, have any of you found a method to shove the tubing over the barbs fully?



 I've never given birth to a child, personally, but I'm pretty sure this is what it's like.



 Hopefully there is a well-known lubricant out there that won't damage the electronics inside the distribution units.



 Or perhaps you can give me a tip to become more dilated.   Either way, something has to give.



 Phil



 Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum