Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Sky-Tec NL vs LS starter
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Tim Olson



Joined: 25 Jan 2007
Posts: 2870

PostPosted: Thu Feb 16, 2017 2:00 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

Hey all, I'm thinking of replacing my starter on my RV-10
with the NL starter. I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else? If not, I'll go ahead
and just order one.

Tim


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
kdb.rv10(at)gmail.com
Guest





PostPosted: Thu Feb 16, 2017 2:15 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

Tim,
I had the 149-12PM on my RV10 and it would hardly turn it over. I have 2 PC680 batteries, but that's hardly enough power. Your larger battery must help there. I changed to the NL starter and it's great. It fits just fine and has much more torque. I don't have any problems now starting on one PC680. I think it's the best starter for the RV10.
Kevin Belue
On Thu, Feb 16, 2017 at 3:59 PM, Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
Quote:
--> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com>

Hey all,  I'm thinking of replacing my starter on my RV-10
with the NL starter.  I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else?  If not, I'll go ahead
and just order one.

Tim
====================================
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
====================================
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
====================================





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rene(at)felker.com
Guest





PostPosted: Thu Feb 16, 2017 2:29 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

What is the ~price on the NL?  How much weight does it add?  I do not have a problem with the starter working with the 925 batter, but I think I am developing a dead (weak) spot and will be replacing my starter this annual……..unless the problem goes away when it gets warmer and I fly more.

Rene'
801-721-6080

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Kevin Belue
Sent: Thursday, February 16, 2017 3:15 PM
To: rv10-list(at)matronics.com
Subject: Re: Sky-Tec NL vs LS starter

Tim,



I had the 149-12PM on my RV10 and it would hardly turn it over. I have 2 PC680 batteries, but that's hardly enough power. Your larger battery must help there. I changed to the NL starter and it's great. It fits just fine and has much more torque. I don't have any problems now starting on one PC680. I think it's the best starter for the RV10.



Kevin Belue

On Thu, Feb 16, 2017 at 3:59 PM, Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
Quote:

--> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com (Tim(at)MyRV10.com)>

Hey all, I'm thinking of replacing my starter on my RV-10
with the NL starter. I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else? If not, I'll go ahead
and just order one.

Tim
====================================
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
====================================


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jesse(at)saintaviation.co
Guest





PostPosted: Thu Feb 16, 2017 2:34 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

I have never seen a fit issue.

Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
C: 352-427-0285
F: 815-377-3694

Sent from my iPhone

Quote:
On Feb 16, 2017, at 4:59 PM, Tim Olson <Tim(at)MyRV10.com> wrote:



Hey all, I'm thinking of replacing my starter on my RV-10
with the NL starter. I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else? If not, I'll go ahead
and just order one.

Tim





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Tim Olson



Joined: 25 Jan 2007
Posts: 2870

PostPosted: Thu Feb 16, 2017 2:39 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

Thanks Kevin,

I just hit "place order". Should have one next Wednesday.
I haven't heard any negatives in all my reading so I'm going to
go with it. My PC925 does work for the IO-540, but getting past
that first prop blade sometimes takes a 2nd try. But once
you start it spinning it does an OK job. I'm sure the NL
will be better.

I have an issue with my RV-14 starter not always cranking,b
but when it cranks its great. It's an LS. I was hoping to
pull my RV-10 starter and use it while I send that one in,
but it's a PM and not an LS, and I don't think the cable
lengths will work out. Oh well.

Tim

On 2/16/2017 4:14 PM, Kevin Belue wrote:
Quote:
Tim,

I had the 149-12PM on my RV10 and it would hardly turn it over. I have 2
PC680 batteries, but that's hardly enough power. Your larger battery
must help there. I changed to the NL starter and it's great. It fits
just fine and has much more torque. I don't have any problems now
starting on one PC680. I think it's the best starter for the RV10.

Kevin Belue

On Thu, Feb 16, 2017 at 3:59 PM, Tim Olson <Tim(at)myrv10.com
<mailto:Tim(at)myrv10.com>> wrote:



Hey all, I'm thinking of replacing my starter on my RV-10
with the NL starter. I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else? If not, I'll go ahead
and just order one.

Tim
====================================
-List" target="_blank"
rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
====================================
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
====================================
b Site -
-Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
====================================




- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
kdb.rv10(at)gmail.com
Guest





PostPosted: Thu Feb 16, 2017 2:41 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

The Skytec NL starter weighs 9.3 lbs and costs $436 at Aircraft Spruce.

On Thu, Feb 16, 2017 at 4:28 PM, Rene <rene(at)felker.com (rene(at)felker.com)> wrote:
Quote:

What is the ~price on the NL?  How much weight does it add?  I do not have a problem with the starter working with the 925 batter, but I think I am developing a dead (weak) spot and will be replacing my starter this annual……..unless the problem goes away when it gets warmer and I fly more.
 
Rene'
[url=tel:(801)%20721-6080]801-721-6080[/url]
 
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Kevin Belue
Sent: Thursday, February 16, 2017 3:15 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: RV10-List: Sky-Tec NL vs LS starter
 
Tim,

 

I had the 149-12PM on my RV10 and it would hardly turn it over. I have 2 PC680 batteries, but that's hardly enough power. Your larger battery must help there. I changed to the NL starter and it's great. It fits just fine and has much more torque. I don't have any problems now starting on one PC680. I think it's the best starter for the RV10.

 

Kevin Belue
 
On Thu, Feb 16, 2017 at 3:59 PM, Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
Quote:

--> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com (Tim(at)MyRV10.com)>

Hey all,  I'm thinking of replacing my starter on my RV-10
with the NL starter.  I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else?  If not, I'll go ahead
and just order one.

Tim
====================================
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
===========


 


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Tim Olson



Joined: 25 Jan 2007
Posts: 2870

PostPosted: Thu Feb 16, 2017 2:42 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

I had 2 choices. One was $499 from Sky-Tec and then trade mine in for
a $154 credit, and the 2nd choice was $436 from ACS. I chose the
latter. It looks like 1lb more than my PM starter. All the better
for my CG when I load it up.
Tim
On 2/16/2017 4:28 PM, Rene wrote:
Quote:
What is the ~price on the NL? How much weight does it add? I do not
have a problem with the starter working with the 925 batter, but I think
I am developing a dead (weak) spot and will be replacing my starter this
annual……..unless the problem goes away when it gets warmer and I fly more.

Rene'

801-721-6080

*From:*owner-rv10-list-server(at)matronics.com
[mailto:owner-rv10-list-server(at)matronics.com] *On Behalf Of *Kevin Belue
*Sent:* Thursday, February 16, 2017 3:15 PM
*To:* rv10-list(at)matronics.com
*Subject:* Re: Sky-Tec NL vs LS starter

Tim,

I had the 149-12PM on my RV10 and it would hardly turn it over. I have 2
PC680 batteries, but that's hardly enough power. Your larger battery
must help there. I changed to the NL starter and it's great. It fits
just fine and has much more torque. I don't have any problems now
starting on one PC680. I think it's the best starter for the RV10.

Kevin Belue

On Thu, Feb 16, 2017 at 3:59 PM, Tim Olson <Tim(at)myrv10.com
<mailto:Tim(at)myrv10.com>> wrote:


<mailto:Tim(at)MyRV10.com>>

Hey all, I'm thinking of replacing my starter on my RV-10
with the NL starter. I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else? If not, I'll go ahead
and just order one.

Tim
====================================
-List" target="_blank"
rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
====================================




- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
rene(at)felker.com
Guest





PostPosted: Thu Feb 16, 2017 3:00 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

Thanks Tim, I am the same on the CG. I added a 680 on the firewall, almost 100% for CG reasons. Big battery, O2, and APRS all behind the rear bulkhead or in the tail.

Rene'
801-721-6080

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jesse(at)saintaviation.co
Guest





PostPosted: Thu Feb 16, 2017 3:02 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

Skytec has an option where you can send your starter to them for "rebuild" and get a different model back. Cheaper than buying a new one. I think the "rebuilt" is just a new unit.

Jesse SaintSaint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
C: 352-427-0285
F: 815-377-3694
Sent from my iPhone
On Feb 16, 2017, at 5:28 PM, Rene <rene(at)felker.com (rene(at)felker.com)> wrote:
Quote:
<![endif]--> <![endif]-->
What is the ~price on the NL? How much weight does it add? I do not have a problem with the starter working with the 925 batter, but I think I am developing a dead (weak) spot and will be replacing my starter this annual……..unless the problem goes away when it gets warmer and I fly more.
 
Rene'
801-721-6080

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Kevin Belue
Sent: Thursday, February 16, 2017 3:15 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: RV10-List: Sky-Tec NL vs LS starter

Tim,



I had the 149-12PM on my RV10 and it would hardly turn it over. I have 2 PC680 batteries, but that's hardly enough power. Your larger battery must help there. I changed to the NL starter and it's great. It fits just fine and has much more torque. I don't have any problems now starting on one PC680. I think it's the best starter for the RV10.



Kevin Belue

On Thu, Feb 16, 2017 at 3:59 PM, Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
Quote:

--> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com (Tim(at)MyRV10.com)>

Hey all, I'm thinking of replacing my starter on my RV-10
with the NL starter. I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else? If not, I'll go ahead
and just order one.

Tim
====================================
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
===========
b Site -
  -Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
====================================





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Tim Olson



Joined: 25 Jan 2007
Posts: 2870

PostPosted: Thu Feb 16, 2017 3:26 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

Maybe I'll try that.  If I send them my PM for a rebuild, I can get
it back as an NL, and throw an NL on both airplanes.
That would be nice.
Tim



On 2/16/2017 5:02 PM, Jesse Saint wrote:

Quote:
Skytec has an option where you can send your starter to them for "rebuild" and get a different model back. Cheaper than buying a new one. I think the "rebuilt" is just a new unit. 

Jesse Saint Saint Aviation, Inc. 
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
C: 352-427-0285
F: 815-377-3694


Sent from my iPhone


On Feb 16, 2017, at 5:28 PM, Rene <rene(at)felker.com (rene(at)felker.com)> wrote:


Quote:
<![endif]--> <![endif]-->
What is the ~price on the NL?  How much weight does it add?  I do not have a problem with the starter working with the 925 batter, but I think I am developing a dead (weak) spot and will be replacing my starter this annual……..unless the problem goes away when it gets warmer and I fly more.
 
Rene'
801-721-6080
 
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Kevin Belue
Sent: Thursday, February 16, 2017 3:15 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Sky-Tec NL vs LS starter
 
Tim,

 

I had the 149-12PM on my RV10 and it would hardly turn it over. I have 2 PC680 batteries, but that's hardly enough power. Your larger battery must help there. I changed to the NL starter and it's great. It fits just fine and has much more torque. I don't have any problems now starting on one PC680. I think it's the best starter for the RV10.

 

Kevin Belue


 
On Thu, Feb 16, 2017 at 3:59 PM, Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
Quote:

--> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com (Tim(at)MyRV10.com)>

Hey all,  I'm thinking of replacing my starter on my RV-10
with the NL starter.  I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else?  If not, I'll go ahead
and just order one.

Tim
====================================
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
====================================




 




- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
flysrv10(at)gmail.com
Guest





PostPosted: Thu Feb 16, 2017 4:07 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

Tim,

If the NL is the long version with planetary gear, I have one and have no issues with the standard installation. I have a narrow deck 540.

Do not archive

Sent from my iPhone

Quote:
On Feb 16, 2017, at 4:59 PM, Tim Olson <Tim(at)MyRV10.com> wrote:



Hey all, I'm thinking of replacing my starter on my RV-10
with the NL starter. I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else? If not, I'll go ahead
and just order one.

Tim





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Kellym



Joined: 10 Jan 2006
Posts: 1700
Location: Sun Lakes AZ

PostPosted: Thu Feb 16, 2017 6:15 pm    Post subject: Sky-Tec NL vs LS starter Reply with quote

I chose a Hartzell (orig Kelly) ERZ-8011. I like it a lot. A bit more
torque and slower rpm than the Nline Skytec. However, when I made the
choice it was close to the Skytec in price. Since Hartzell took over, it
now is priced at a $200 premium. No way I would pay that much extra now.
One other advantage it had was a clutch to protect against kick backs. I
understand that Skytec has since adopted that feature, instead of the
shear pins they originally had. I was not a fan of having to remove a
starter just to replace a shear pin. Didn't I read about Hartzell buying
out both Skytec and Plane Power recently? Hard to say what that means in
the long run.

On 2/16/2017 5:02 PM, Rob Kermanj wrote:
Quote:


Tim,

If the NL is the long version with planetary gear, I have one and have no issues with the standard installation. I have a narrow deck 540.

Do not archive

Sent from my iPhone

> On Feb 16, 2017, at 4:59 PM, Tim Olson <Tim(at)MyRV10.com> wrote:
>
>
>
> Hey all, I'm thinking of replacing my starter on my RV-10
> with the NL starter. I think mine is the 149-12PM
> right now.
>
> Can anyone who's either swapped for an NL or has an NL
> comment on the fit of the starter in relation to all the
> other stuff... i.e. is there any realistic chance that if I
> swap starters its not going to fit well because of
> some interference somewhere else? If not, I'll go ahead
> and just order one.
>
> Tim
>




- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD
Back to top
View user's profile Send private message
Tim Olson



Joined: 25 Jan 2007
Posts: 2870

PostPosted: Fri Feb 17, 2017 7:25 am    Post subject: Sky-Tec NL vs LS starter Reply with quote

Just following up on this.

Today I bought a 2nd NL starter. So I'm going to just put them on
both planes. I'll have a 149-12LS and 149-12PM on the shelf
as spares I guess.

I asked Sky-Tec about the rebuild option. She said that is
not an option any longer and went away when Hartzell bought
Sky-Tec. They only have one option now. You can buy a
new starter, from them ($499 vs $436 street price), then
after you pull your old one send the receipt and old starter
in, and get your credit. Current credit for the old is
$154 for the LS or PM. So a delta of about $90. But,
you have to pay shipping in both directions...for the new
starter, and the old starter, and I'm assuming for the
replaced starter. With shipping costs where it is, that
$90 will get cut to almost nothing by 3 shipments at $25.
So, by buying 2 from spruce, I got free shipping on the new
ones, and now I'll have 2 that I can either shelf for
spares, or sell, or whatever.

BTW: The NL starter can only be wired (without modification)
by using the single-wire method. I have both planes wired
per Van's where you pull the jumper wire. Just wanted to
note that there is that difference.

I opted for the NL for the 14 primarily for expedience in
getting it fixed, but also to add that 1lb to the engine.
It will assist in keeping my CG forward for aerobatic envelope
purposes.

Tim

On 2/16/2017 5:02 PM, Jesse Saint wrote:
Quote:
Skytec has an option where you can send your starter to them for
"rebuild" and get a different model back. Cheaper than buying a new one.
I think the "rebuilt" is just a new unit.

Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com <mailto:jesse(at)saintaviation.com>
C: 352-427-0285
F: 815-377-3694



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
philperry9



Joined: 23 Nov 2011
Posts: 379

PostPosted: Fri Feb 17, 2017 7:30 am    Post subject: Sky-Tec NL vs LS starter Reply with quote

Tim,

I'm not familiar with the 149-12PM, so I can't comment on the differences between the fit.  However I have the NL, and can't imagine that you would have any fit issues.  It tucks away into the engine nicely.  Perhaps you could have a scat tube, cable, or wire in the way, but I doubt it.
Here's some photos with a straight edge to help put things into perspective.
For the record, I have a dual alt/battery setup with dual PC-680's on the backend.  I also have 9:1 pistons and a the NL starter doesn't even blink at spinning the MT on a single battery.   Plenty of torque off a 680 for the 9:1 pistons.  Your PC-925 and 8.5 pistons (IIRC) won't have any issues at all.
Phil


[img]cid:ii_15a4cadb70a02f40[/img]

[img]cid:ii_15a4cae019fc7c07[/img]

[img]cid:ii_15a4cae50f7acba8[/img]
On Thu, Feb 16, 2017 at 8:17 PM, Kelly McMullen <kellym(at)aviating.com (kellym(at)aviating.com)> wrote:
Quote:
--> RV10-List message posted by: Kelly McMullen <kellym(at)aviating.com (kellym(at)aviating.com)>

I chose a Hartzell (orig Kelly) ERZ-8011. I like it a lot. A bit more torque and slower rpm than the Nline Skytec. However, when I made the choice it was close to the Skytec in price. Since Hartzell took over, it now is priced at a $200 premium. No way I would pay that much extra now. One other advantage it had was a clutch to protect against kick backs. I understand that Skytec has since adopted that feature, instead of the shear pins they originally had. I was not a fan of having to remove a starter just to replace a shear pin. Didn't I read about Hartzell buying out both Skytec and Plane Power recently? Hard to say what that means in the long run.

On 2/16/2017 5:02 PM, Rob Kermanj wrote:
Quote:
--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>

Tim,

If the NL is the long version with planetary gear, I have one and have no issues with the standard installation.  I have a narrow deck 540.

Do not archive

Sent from my iPhone

Quote:
On Feb 16, 2017, at 4:59 PM, Tim Olson <Tim(at)MyRV10.com> wrote:

--> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com>

Hey all,  I'm thinking of replacing my starter on my RV-10
with the NL starter.  I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else?  If not, I'll go ahead
and just order one.

Tim







====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================







- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List



image.png
 Description:
 Filesize:  117.44 KB
 Viewed:  11767 Time(s)

image.png



image.png
 Description:
 Filesize:  153.5 KB
 Viewed:  11767 Time(s)

image.png



image.png
 Description:
 Filesize:  114.05 KB
 Viewed:  11767 Time(s)

image.png


Back to top
View user's profile Send private message
Kelly McMullen



Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

PostPosted: Fri Feb 17, 2017 7:49 am    Post subject: Sky-Tec NL vs LS starter Reply with quote

The LS and PM starters are permanent magnet, a little lighter than the NL and have the solenoid either on the right or left side of the motor. It is an issue with baffle fit. They draw a lot more current than the NL and have trouble cranking past the compression stroke if the battery is a little down or there is any resistance in the cable connections between battery and starter. I have one on my Mooney. Took some tracking down to replace an old starter relay that had resistance before it would crank reliably.
-sent from the I-droid implanted in my forearm

On Fri, Feb 17, 2017 at 8:26 AM, Phillip Perry <philperry9(at)gmail.com (philperry9(at)gmail.com)> wrote:
Quote:


Tim,

I'm not familiar with the 149-12PM, so I can't comment on the differences between the fit.  However I have the NL, and can't imagine that you would have any fit issues.  It tucks away into the engine nicely.  Perhaps you could have a scat tube, cable, or wire in the way, but I doubt it.
 



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD
Back to top
View user's profile Send private message
Tim Olson



Joined: 25 Jan 2007
Posts: 2870

PostPosted: Fri Feb 17, 2017 7:52 am    Post subject: Sky-Tec NL vs LS starter Reply with quote

That's kind of what I figured Phil. The photos all make it
look much longer than the LS/PM versions. The LS and PM
seem to be almost identical, with the solenoid on the opposite
side of the main body. I may have some small wires like for
my lightspeed ignition or something that I have to
adjust but I don't expect anything major. It's just that
going from a short/wide starter to a narrow/long one
had me wondering if I was overlooking something. I guess
I'll know in a couple weeks.

I'll report back after I get them installed.

Tim
On 2/17/2017 9:26 AM, Phillip Perry wrote:
Quote:

Tim,

I'm not familiar with the 149-12PM, so I can't comment on the
differences between the fit. However I have the NL, and can't imagine
that you would have any fit issues. It tucks away into the engine
nicely. Perhaps you could have a scat tube, cable, or wire in the way,
but I doubt it.

Here's some photos with a straight edge to help put things into perspective.

For the record, I have a dual alt/battery setup with dual PC-680's on
the backend. I also have 9:1 pistons and a the NL starter doesn't even
blink at spinning the MT on a single battery. Plenty of torque off a
680 for the 9:1 pistons. Your PC-925 and 8.5 pistons (IIRC) won't have
any issues at all.

Phil


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
gengrumpy



Joined: 07 May 2013
Posts: 131
Location: Tullahoma, TN

PostPosted: Fri Feb 17, 2017 7:59 am    Post subject: Sky-Tec NL vs LS starter Reply with quote

In the FWIW area on starters, I originally had the LS starter on my 10. I had always had difficulty starting with just 1 PC 680 battery. During my 2015 ACI I decided to send it back to SkyTech for refurb. When discussing with them, they told me I had the wrong starter installed since the engine was built by AeroSport Power in 2006! They sent me an overhauled NL starter with my LS as the core. Same fit and function as the LS.

The difference in the initial turning of blades is night and day different (MUCH improved).

grumpy
n184jm

do not archive

Quote:
On Feb 17, 2017, at 9:51 AM, Tim Olson <Tim(at)MyRV10.com> wrote:



That's kind of what I figured Phil. The photos all make it
look much longer than the LS/PM versions. The LS and PM
seem to be almost identical, with the solenoid on the opposite
side of the main body. I may have some small wires like for
my lightspeed ignition or something that I have to
adjust but I don't expect anything major. It's just that
going from a short/wide starter to a narrow/long one
had me wondering if I was overlooking something. I guess
I'll know in a couple weeks.

I'll report back after I get them installed.

Tim


On 2/17/2017 9:26 AM, Phillip Perry wrote:
>
> Tim,
>
> I'm not familiar with the 149-12PM, so I can't comment on the
> differences between the fit. However I have the NL, and can't imagine
> that you would have any fit issues. It tucks away into the engine
> nicely. Perhaps you could have a scat tube, cable, or wire in the way,
> but I doubt it.
>
> Here's some photos with a straight edge to help put things into perspective.
>
> For the record, I have a dual alt/battery setup with dual PC-680's on
> the backend. I also have 9:1 pistons and a the NL starter doesn't even
> blink at spinning the MT on a single battery. Plenty of torque off a
> 680 for the 9:1 pistons. Your PC-925 and 8.5 pistons (IIRC) won't have
> any issues at all.
>
> Phil
>
>





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
philperry9



Joined: 23 Nov 2011
Posts: 379

PostPosted: Fri Feb 17, 2017 8:05 am    Post subject: Sky-Tec NL vs LS starter Reply with quote

I'm at the hangar now, trying to get this thing finished up, so I can give you any measurement you want.

The back of the starter to the front of the sump is exactly 1".

On Fri, Feb 17, 2017 at 9:51 AM, Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
Quote:
--> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com>

That's kind of what I figured Phil.  The photos all make it
look much longer than the LS/PM versions. The LS and PM
seem to be almost identical, with the solenoid on the opposite
side of the main body.  I may have some small wires like for
my lightspeed ignition or something that I have to
adjust but I don't expect anything major.  It's just that
going from a short/wide starter to a narrow/long one
had me wondering if I was overlooking something.  I guess
I'll know in a couple weeks.

I'll report back after I get them installed.

Tim


On 2/17/2017 9:26 AM, Phillip Perry wrote:
Quote:

Tim,

I'm not familiar with the 149-12PM, so I can't comment on the
differences between the fit.  However I have the NL, and can't imagine
that you would have any fit issues.  It tucks away into the engine
nicely.  Perhaps you could have a scat tube, cable, or wire in the way,
but I doubt it.

Here's some photos with a straight edge to help put things into perspective.

For the record, I have a dual alt/battery setup with dual PC-680's on
the backend.  I also have 9:1 pistons and a the NL starter doesn't even
blink at spinning the MT on a single battery.   Plenty of torque off a
680 for the 9:1 pistons.  Your PC-925 and 8.5 pistons (IIRC) won't have
any issues at all.

Phil


====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================







- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message
Mauledriver(at)nc.rr.com
Guest





PostPosted: Fri Feb 17, 2017 9:07 am    Post subject: Sky-Tec NL vs LS starter Reply with quote

Okay, that does it.  I'm swapping mine as well.

I too have (2) 680s and it 'should' be enough power but it isn't for the LS.  That first blade is always in question.

Thanks all!

On 2/16/2017 5:28 PM, Rene wrote:

Quote:
<![endif]--> <![endif]-->
What is the ~price on the NL?  How much weight does it add?  I do not have a problem with the starter working with the 925 batter, but I think I am developing a dead (weak) spot and will be replacing my starter this annual……..unless the problem goes away when it gets warmer and I fly more.
 
Rene'
801-721-6080
 
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Kevin Belue
Sent: Thursday, February 16, 2017 3:15 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Sky-Tec NL vs LS starter
 
Tim,

 

I had the 149-12PM on my RV10 and it would hardly turn it over. I have 2 PC680 batteries, but that's hardly enough power. Your larger battery must help there. I changed to the NL starter and it's great. It fits just fine and has much more torque. I don't have any problems now starting on one PC680. I think it's the best starter for the RV10.

 

Kevin Belue


 
On Thu, Feb 16, 2017 at 3:59 PM, Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
Quote:

--> RV10-List message posted by: Tim Olson <Tim(at)MyRV10.com (Tim(at)MyRV10.com)>

Hey all,  I'm thinking of replacing my starter on my RV-10
with the NL starter.  I think mine is the 149-12PM
right now.

Can anyone who's either swapped for an NL or has an NL
comment on the fit of the starter in relation to all the
other stuff... i.e. is there any realistic chance that if I
swap starters its not going to fit well because of
some interference somewhere else?  If not, I'll go ahead
and just order one.

Tim
====================================
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
====================================




 




This email has been checked for viruses by Avast antivirus software.
www.avast.com


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Tim Olson



Joined: 25 Jan 2007
Posts: 2870

PostPosted: Fri Feb 17, 2017 9:21 am    Post subject: Sky-Tec NL vs LS starter Reply with quote

Ok Bill, I give you permission to put in your order now. Smile
I say that because I'm sure that by now mine have been
packaged for shipping so you won't take one of mine. Wink

You're absolutely right. It's the first blade that's the
problem. On my RV-14 the LS works great, but the NL
should work even better. It will turn the prop
"bigly" to quote a random buffoon I keep seeing on tv.

Tim

On 2/17/2017 11:06 AM, Bill Watson wrote:
Quote:
Okay, that does it. I'm swapping mine as well.

I too have (2) 680s and it 'should' be enough power but it isn't for the
LS. That first blade is always in question.

Thanks all!



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group