Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

One last question - almost

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
philperry9



Joined: 23 Nov 2011
Posts: 379

PostPosted: Thu Feb 23, 2017 9:36 am    Post subject: One last question - almost Reply with quote

I'm about to close up this aft deck area to prep for the inspection. Before I do, I'm just going over everything one last time.

For those if you using the overhead console from Geoff, have any of you had experience with using an undersized hole in the bulkhead? Just curious how the airflow is...

I punched a 1" hole inside the 2" scat connector. I just couldn't bring myself to knocking a 2" hole in that bulkhead.

I also drilled a 1/8" drain hole to let any water drain out. I'll attach a photo so you can see.

I'm just curious if anyone else has done something similar with a 1" hole and I'm most curious about how happy you are with he airflow.

Thanks,
Phil
Sent from my iPhone


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List



image1.JPG
 Description:
 Filesize:  65.79 KB
 Viewed:  1995 Time(s)

image1.JPG


Back to top
View user's profile Send private message
civengpe



Joined: 14 Feb 2011
Posts: 105

PostPosted: Thu Feb 23, 2017 10:35 am    Post subject: One last question - almost Reply with quote

Phil,I used two 1" holes with 2"X1" bulkhead adapters.  The airflow seems very good to me. 
Shannon
On Thu, Feb 23, 2017 at 11:35 AM, Phillip Perry <philperry9(at)gmail.com (philperry9(at)gmail.com)> wrote:
Quote:
I'm about to close up this aft deck area to prep for the inspection.  Before I do, I'm just going over everything one last time.

For those if you using the overhead console from Geoff, have any of you had experience with using an undersized hole in the bulkhead?   Just curious how the airflow is...

I punched a 1" hole inside the 2" scat connector.  I just couldn't bring myself to knocking a 2" hole in that bulkhead.

I also drilled a 1/8" drain hole to let any water drain out.   I'll attach a photo so you can see.

I'm just curious if anyone else has done something similar with a 1" hole and I'm most curious about how happy you are with he airflow.

Thanks,
Phil






Sent from my iPhone


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List



IMG_20140823_111915423.jpg
 Description:
 Filesize:  122.94 KB
 Viewed:  1993 Time(s)

IMG_20140823_111915423.jpg



IMG_20140825_123705284.jpg
 Description:
 Filesize:  456.34 KB
 Viewed:  1993 Time(s)

IMG_20140825_123705284.jpg


Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group