Matronics Email Lists Forum Index Matronics Email Lists
BBS Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Vi Kapler hinges
Goto page Previous  1, 2
 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Pietenpol-List
View previous topic :: View next topic  
Author Message
taildrags



Joined: 29 Dec 2009
Posts: 1532
Location: Medford, OR

PostPosted: Sat May 06, 2017 8:31 am    Post subject: Re: Vi Kapler hinges Reply with quote

To those who asked about as-cast hinge blanks- yes, I will sell them in that condition. I will inspect the rough castings and sell them as-is, for the builder to turn into finished hinges. The operations required are not difficult or intricate, but they do require some care in order to have the pivot holes all turn out straight and square. I have jigs for these operations, but jigs are not essential if the builder is consistent about placing and aligning the holes.

Smoothing and finishing are the most tedious operations, depending on the level of finish desired. I don't have anything like a mill and the parts don't require milling unless you want absolutely square, flat, true, and parallel surfaces and edges.

The operations, and a picture of a typical completed pair of hinges, are on the webpage that I gave earlier, here:

http://www.flysquirrel.net/RogueAir/hinges.html

I will sell a set of nine pairs of as-cast, unfinished hinges for $27 plus shipping. In the U.S., I send them out via USPS flat-rate small box, which is currently $6.45. Outside the U.S., I would have to have the rate calculated by the post office but I doubt that it would be more than twice the domestic U.S. rate.

Contact me off-list if you are interested, at taildrags(at)hotmail.com


- The Matronics Pietenpol-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pietenpol-List

_________________
Oscar Zuniga
Medford, OR
Air Camper NX41CC "Scout"
A75 power, 72x36 Culver prop
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Pietenpol-List All times are GMT - 8 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group