Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Reduction valve

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> L29-List
View previous topic :: View next topic  
Author Message
fougapilot



Joined: 20 Jul 2007
Posts: 88
Location: Flat on my back with minimum airspeed

PostPosted: Thu Mar 23, 2017 3:58 pm    Post subject: Reduction valve Reply with quote

Guys,

I have finally found the Nitrogen leak I have been searching for the last few months.

My RV-3V-29 valve is leaking like crazy.

This is the valve - located below you right elbow when seated in the front cockpit - that reduces from 50ATM to 3ATM for the canopy seal (Va10 on the pneumatic schematic).

Has anyone ever took this valve apart to clean it? It looks like there is some dirt in there that could cause it to leak.

Of course, this it the one and only reduction valve that you can't find in book III, all the other reduction valves you can see the cutout...

Thanks

Dan


- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List
Back to top
View user's profile Send private message
skyking76t(at)verizon.net
Guest





PostPosted: Thu Mar 23, 2017 4:09 pm    Post subject: Reduction valve Reply with quote

Possible to get a photo of the valve? Thanks

On Thursday, March 23, 2017 8:00 PM, fougapilot <fougapilot(at)hotmail.com> wrote:



--> L29-List message posted by: "fougapilot" <fougapilot(at)hotmail.com (fougapilot(at)hotmail.com)>

Guys,

I have finally found the Nitrogen leak I have been searching for the last few months.

My RV-3V-29 valve is leaking like crazy.

This is the valve - located below you right elbow when seated in the front cockpit - that reduces from 50ATM to 3ATM for the canopy seal (Va10 on the pneumatic schematic).

Has anyone ever took this valve apart to clean it? It looks like there is some dirt in there that could cause it to leak.

Of course, this it the one and only reduction valve that you can't find in book III, all the other reduction valves you can see the cutout...

Thanks

Dan

Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=467557#467557

http://w===================

http://wiki.matronic=======================
</; &nb -->


- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List
Back to top
fougapilot



Joined: 20 Jul 2007
Posts: 88
Location: Flat on my back with minimum airspeed

PostPosted: Thu Mar 23, 2017 4:29 pm    Post subject: Re: Reduction valve Reply with quote

Here you go.

Picture of the valve... don't tell my wife I had it on the kitchen table Wink

Picture of the open and dirty part that is leaking.

D


- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List



FullSizeRender.jpg
 Description:
 Filesize:  438.54 KB
 Viewed:  10454 Time(s)

FullSizeRender.jpg



IMG_1464.jpg
 Description:
 Filesize:  622.2 KB
 Viewed:  10454 Time(s)

IMG_1464.jpg


Back to top
View user's profile Send private message
N777ZE



Joined: 27 Mar 2016
Posts: 32

PostPosted: Sat Mar 25, 2017 9:12 pm    Post subject: Re: Reduction valve Reply with quote

Mine leaked also, would lose all pressure within 2 hours. You can open it and replace the round diaphram with rubber from a raft patch kit. Mine was hard and flaking apart inside. Take lots of photos, there 2 pins inside that have to go back in the same way.

- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List
Back to top
View user's profile Send private message Send e-mail
fougapilot



Joined: 20 Jul 2007
Posts: 88
Location: Flat on my back with minimum airspeed

PostPosted: Mon Mar 27, 2017 9:00 am    Post subject: Re: Reduction valve Reply with quote

That is exactly what is happening to me. The "seal" is all dried out.

I am glad to know it can be changed. Would you remember any details that could help out? More specifically the thickness of the rubber you used? And how did you remove the current seal?

I will definitely take many pictures to make sure I can rebuilt the proper way.

Here are a few ones of the actual seal when you open the valve.

D


- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List



IMG_1469.jpg
 Description:
 Filesize:  276.5 KB
 Viewed:  10420 Time(s)

IMG_1469.jpg



IMG_1468.jpg
 Description:
 Filesize:  246.06 KB
 Viewed:  10420 Time(s)

IMG_1468.jpg


Back to top
View user's profile Send private message
dkloiber



Joined: 22 Mar 2016
Posts: 5

PostPosted: Sat May 06, 2017 6:00 am    Post subject: Re: Reduction valve Reply with quote

I rebuild all of them in my airplane. My system is holding pressure now for weeks. Don't use any rubber for the diaphragm. It's really important that you use reinforced material. Rubber will can not handle the pressure all the time and will leak very bad. If that happens in flight, you will loose all you nitrogen before you can land.

- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List
Back to top
View user's profile Send private message
Dawg



Joined: 19 May 2013
Posts: 355

PostPosted: Sat May 06, 2017 7:11 am    Post subject: Reduction valve Reply with quote

What did u use?

Sent from my Samsung Galaxy smartphone.

-------- Original message --------
From: dkloiber <dakl(at)gmx.com>
Date:05/06/2017 08:00 (GMT-07:00)
To: l29-list(at)matronics.com
Cc:
Subject: L29-List: Re: Reduction valve


- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List

_________________
Dawg
Back to top
View user's profile Send private message
cmoersch3(at)gmail.com
Guest





PostPosted: Sat May 06, 2017 9:10 am    Post subject: Reduction valve Reply with quote

Have not used anything yet. Contemplating next move.

ChristianSent from my iPhone
On May 6, 2017, at 11:11, L129bs <l129bs(at)gmail.com (l129bs(at)gmail.com)> wrote:
Quote:
What did u use?

Sent from my Samsung Galaxy smartphone.

-------- Original message --------
From: dkloiber <dakl(at)gmx.com (dakl(at)gmx.com)>
Date:05/06/2017 08:00 (GMT-07:00)
To: l29-list(at)matronics.com (l29-list(at)matronics.com)
Cc:
Subject: Re: Reduction valve


- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List
Back to top
fougapilot



Joined: 20 Jul 2007
Posts: 88
Location: Flat on my back with minimum airspeed

PostPosted: Mon May 15, 2017 2:09 am    Post subject: Re: Reduction valve Reply with quote

I used a Zodiak repair kit. You can find them at most marine shop for about $20. The patches are Kevlar reinforced, so it helps in holding the pressure. The valve on my rear canopy has been holding at 40atm for about a month now.

I needed to glue two layers of patch to get the proper thickness. And it took quite some time to produce the first seal. The patch is difficult to cut and we wanted to be sure we got the circle right. It basically took me a day to make the seals alone. I did 3, so now I have a spare.

D


- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List



IMG_1507.jpg
 Description:
 Filesize:  351.9 KB
 Viewed:  10140 Time(s)

IMG_1507.jpg


Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> L29-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group