Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Show and tell

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
japowell



Joined: 02 Dec 2016
Posts: 34
Location: Ohio

PostPosted: Thu Jun 22, 2017 3:08 pm    Post subject: Show and tell Reply with quote

Since the list is dead and since I am slowly making progress on the project that I purchased from Rev. Pike back in December, I thought I would post some of the progress. I have rebuilt the wings and fuselage and now have them under paint. I fabricated a set of 4130 gear legs and tundra tires. I am in the process of fabricating a more comfortable seat similar to the one Richard has. I am trying to decide which way to go on the windshield, short or full. I will be installing hydraulic brakes and a trim system. Wings are set at 3* dyhedral and I have a set of fairings for the struts and the gear legs.

Progress is slow but I'm having a blast. Richard gave me a lot of tips on building this thing that has really been great. Also, I picked up a chute from Ted in Bama and also a lot of building tips. Trying to decide on the instruments, EIS or analog. Don't know the advantages of either except for the warning light.

Any comments or suggestion would be welcome. I have learned a ton from this list and appreciate all the comments, good or bad. Are there any Kolbs in Ohio? I'm in Zanesville.

Still trying to figure this picture thing out.

Jim in Ohio.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Jim P
WAR EAGLE
Back to top
View user's profile Send private message
lcottrell



Joined: 29 May 2006
Posts: 1490
Location: Jordan Valley, Or

PostPosted: Thu Jun 22, 2017 3:44 pm    Post subject: Show and tell Reply with quote

My only comment would concern the wind screen. If you get too short on
the screen and do not wear a helmet. The wind will hit you somewhere
around the chin and if it is a bit cool then you will have problems
with snot getting on your glasses. The streaks tend to distort your
vision a bit. Roger Hankins met me at a place called Paisley in
Eastern Oregon. He had always flown by himself and didn't need or use
a radio, so he had always worn a Motorcycle helmet. I insisted on a
radio, so to counteract the wind effect he had to resort to breaking
the connecting line to some ear plugs and stuffing the plugs up his
nose. I thought he looked quite dashing in his little plane with two
blue strings hanging out of his nose.

The short screen will cost you on speed however. Some where in the
area of 5-7 MPH.

Just an observation

Larry

On Thu, Jun 22, 2017 at 5:08 PM, japowell <japnmjp(at)twc.com> wrote:
Quote:


Since the list is dead and since I am slowly making progress on the project that I purchased from Rev. Pike back in December, I thought I would post some of the progress. I have rebuilt the wings and fuselage and now have them under paint. I fabricated a set of 4130 gear legs and tundra tires. I am in the process of fabricating a more comfortable seat similar to the one Richard has. I am trying to decide which way to go on the windshield, short or full. I will be installing hydraulic brakes and a trim system. Wings are set at 3* dyhedral and I have a set of fairings for the struts and the gear legs.

Progress is slow but I'm having a blast. Richard gave me a lot of tips on building this thing that has really been great. Also, I picked up a chute from Ted in Bama and also a lot of building tips. Trying to decide on the instruments, EIS or analog. Don't know the advantages of either except for the warning light.

Any comments or suggestion would be welcome. I have learned a ton from this list and appreciate all the comments, good or bad. Are there any Kolbs in Ohio? I'm in Zanesville.

Still trying to figure this picture thing out.

Jim in Ohio.

--------
Jim P
WAR EAGLE


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=470388#470388


--
The older I get, the less tolerant I am of those who are intolerant of others.

If you forward this email, or any part of it, please remove my email
address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
japowell



Joined: 02 Dec 2016
Posts: 34
Location: Ohio

PostPosted: Thu Jun 22, 2017 3:54 pm    Post subject: Re: Show and tell Reply with quote

Hopefully the pic'swork. If not, sorry Richard I'm trying.

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



4.jpg
 Description:
 Filesize:  1.48 MB
 Viewed:  5952 Time(s)

4.jpg



3.jpg
 Description:
 Filesize:  1.63 MB
 Viewed:  5952 Time(s)

3.jpg



2.jpg
 Description:
 Filesize:  1.95 MB
 Viewed:  5952 Time(s)

2.jpg



1.jpg
 Description:
 Filesize:  2.23 MB
 Viewed:  5952 Time(s)

1.jpg



_________________
Jim P
WAR EAGLE
Back to top
View user's profile Send private message
zeprep251(at)aol.com
Guest





PostPosted: Fri Jun 23, 2017 3:30 am    Post subject: Show and tell Reply with quote

There are 3 or 4 MK 3's in our club near Akron Ohio. We are the North coast lite flyers.

Sent from my iPhone

Quote:
On Jun 22, 2017, at 7:08 PM, japowell <japnmjp(at)twc.com> wrote:



Since the list is dead and since I am slowly making progress on the project that I purchased from Rev. Pike back in December, I thought I would post some of the progress. I have rebuilt the wings and fuselage and now have them under paint. I fabricated a set of 4130 gear legs and tundra tires. I am in the process of fabricating a more comfortable seat similar to the one Richard has. I am trying to decide which way to go on the windshield, short or full. I will be installing hydraulic brakes and a trim system. Wings are set at 3* dyhedral and I have a set of fairings for the struts and the gear legs.

Progress is slow but I'm having a blast. Richard gave me a lot of tips on building this thing that has really been great. Also, I picked up a chute from Ted in Bama and also a lot of building tips. Trying to decide on the instruments, EIS or analog. Don't know the advantages of either except for the warning light.

Any comments or suggestion would be welcome. I have learned a ton from this list and appreciate all the comments, good or bad. Are there any Kolbs in Ohio? I'm in Zanesville.

Still trying to figure this picture thing out.

Jim in Ohio.

--------
Jim P
WAR EAGLE




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=470388#470388











- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
Richard Pike



Joined: 09 Jan 2006
Posts: 1669
Location: Blountville, Tennessee

PostPosted: Fri Jun 23, 2017 5:45 am    Post subject: Re: Show and tell Reply with quote

Looks good!

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Bill Long



Joined: 06 Apr 2010
Posts: 19

PostPosted: Fri Jun 23, 2017 7:13 am    Post subject: Show and tell Reply with quote

I would go full. Had a short and put on a full. A good 5 to 7  faster. Better mileage. Only down side is photography. 
Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: japowell <japnmjp(at)twc.com>
Date: 6/22/17 7:08 PM (GMT-05:00)
To: kolb-list(at)matronics.com
Subject: Kolb-List: Show and tell

--> Kolb-List message posted by: "japowell" <japnmjp(at)twc.com>

Since the list is dead and since I am slowly making progress on the project that I purchased from Rev. Pike back in December, I thought I would post some of the progress.  I have rebuilt the wings and fuselage and now have them under paint.  I fabricated a set of 4130 gear legs and tundra tires.  I am in the process of fabricating a more comfortable seat similar to the one Richard has. I am trying to decide which way to go on the windshield, short or full.  I will be installing hydraulic brakes and a trim system.  Wings are set at 3* dyhedral and I have a set of fairings for the struts and the gear legs.

Progress is slow but I'm having a blast. Richard gave me a lot of tips on building this thing that has really been great.  Also, I picked up a chute from Ted in Bama and also a lot of building tips. Trying to decide on the instruments, EIS or analog.  Don't know the advantages of either except for the warning light.

Any comments or suggestion would be welcome. I have learned a ton from this list and appreciate all the comments, good or bad.  Are there any Kolbs in Ohio?  I'm in Zanesville.

Still trying to figure this picture thing out.

Jim in Ohio.

--------
Jim P
WAR EAGLE


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=470388#470388
_-============================================================
_-=          - The Kolb-List Email Forum -
_-= Use the Matronics List Features Navigator to browse
_-= the many List utilities such as List Un/Subscription,
_-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
_-= Photoshare, and much much more:
_-=
_-=   --> http://www.matronics.com/Navigator?Kolb-List
_-=
_-============================================================
_-=               - MATRONICS WEB FORUMS -
_-= Same great content also available via the Web Forums!
_-=
_-=   --> http://forums.matronics.com
_-=
_-============================================================
_-=              - NEW MATRONICS LIST WIKI -
_-= Add some info to the Matronics Email List Wiki!
_-=   --> http://wiki.matronics.com
_-============================================================
_-=             - List Contribution Web Site -
_-=  Thank you for your generous support!
_-=                              -Matt Dralle, List Admin.
_-=   --> http://www.matronics.com/contribution
_-============================================================


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message Send e-mail
lcottrell



Joined: 29 May 2006
Posts: 1490
Location: Jordan Valley, Or

PostPosted: Fri Jun 23, 2017 8:03 am    Post subject: Show and tell Reply with quote

blong6826 blong6826(at)sbcglobal.net via matronics.com

9:13 AM (44 minutes ago)
to kolb-list
I would go full. Had a short and put on a full. A good 5 to 7 faster.
Better mileage. Only down side is photography.

====================================================================
Try this solution. The only thing is, that I made it with the plane
sitting flat. So when it is in flying attitude, the window is a bit
tilted. Just decide whether you want the angle to be aligned when
sitting or flying.
Larry


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



camara_port_1.JPG
 Description:
 Filesize:  1.56 MB
 Viewed:  5879 Time(s)

camara_port_1.JPG



camara_port.JPG
 Description:
 Filesize:  1.34 MB
 Viewed:  5879 Time(s)

camara_port.JPG



_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group