Matronics Email Lists Forum Index Matronics Email Lists
BBS Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Video

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
byoungplumbing(at)gmail.c
Guest





PostPosted: Mon Mar 06, 2017 7:38 am    Post subject: Video Reply with quote

Ok someone contacted me and said no joy on the video.....    It worked for me maybe because I was checked into the account...... 
Try this
https://vimeo.com/119686841
Password is       beekeeper
On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Sorry the previous email should have been off list.   If you want to watch video the password is.     beekeeper         https://vimeo.com/user29057193/flying-the-bear-river
Boyd


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
lcottrell



Joined: 29 May 2006
Posts: 1324
Location: Jordan Valley, Or

PostPosted: Mon Mar 06, 2017 8:41 am    Post subject: Video Reply with quote

I was able to view it ok. I assume from the small size of the picture that it was originally made with "Movie Maker", would that be right? I am not sure why they want to shrink the size of the video's, but that is why I quit using it.

It looks nice and smooth, something that I could not obtain from a wing strut mounting. I recall telling Bill B that a mount on the wing strut would not work. It appears that I am going to have to qualify that to say that it won't work on a Firestar II. Oh well!
Larry
On Mon, Mar 6, 2017 at 8:38 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Ok someone contacted me and said no joy on the video.....    It worked for me maybe because I was checked into the account...... 
Try this
https://vimeo.com/119686841
Password is       beekeeper
On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Sorry the previous email should have been off list.   If you want to watch video the password is.     beekeeper         https://vimeo.com/user29057193/flying-the-bear-river
Boyd



--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
byoungplumbing(at)gmail.c
Guest





PostPosted: Mon Mar 06, 2017 8:45 am    Post subject: Video Reply with quote

OK what editing software should I replace movie maker with?
On Mar 6, 2017 9:43 AM, "Larry Cottrell" <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:
Quote:
I was able to view it ok. I assume from the small size of the picture that it was originally made with "Movie Maker", would that be right? I am not sure why they want to shrink the size of the video's, but that is why I quit using it.

It looks nice and smooth, something that I could not obtain from a wing strut mounting. I recall telling Bill B that a mount on the wing strut would not work. It appears that I am going to have to qualify that to say that it won't work on a Firestar II. Oh well!
Larry
On Mon, Mar 6, 2017 at 8:38 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Ok someone contacted me and said no joy on the video.....    It worked for me maybe because I was checked into the account...... 
Try this
https://vimeo.com/119686841
Password is       beekeeper
On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Sorry the previous email should have been off list.   If you want to watch video the password is.     beekeeper         https://vimeo.com/user29057193/flying-the-bear-river
Boyd



--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.



- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
neilsenrm(at)gmail.com
Guest





PostPosted: Mon Mar 06, 2017 9:21 am    Post subject: Video Reply with quote

Boyd
The video is great. send us more.
I use movie maker and it has always produced larger size picture. I'm not real proficient with movie maker and it seems like vimeo tells me there is a better resolution to use but I get the large picture and it looks great so I haven't fixed it. Seems like I just set the publishing settings as movie maker recommended for vimeo.
I tried a bunch of different mounts and the wing strut mount (right at the jury strut attachment) works best for my MKIIIC. My camera has a real wide field of view so I get the leading edge of the wing. If I point it down more the video looks strange and has more of the rolling effect.
Rick Neilsen
Redrive VW Powered MKIIIC  
On Mon, Mar 6, 2017 at 10:38 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Ok someone contacted me and said no joy on the video.....    It worked for me maybe because I was checked into the account...... 
Try this
https://vimeo.com/119686841
Password is       beekeeper
On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Sorry the previous email should have been off list.   If you want to watch video the password is.     beekeeper         https://vimeo.com/user29057193/flying-the-bear-river
Boyd



- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
lcottrell



Joined: 29 May 2006
Posts: 1324
Location: Jordan Valley, Or

PostPosted: Mon Mar 06, 2017 9:32 am    Post subject: Video Reply with quote

http://www.cyberlink.com/stat/edms/ppc/video-editing-software/powerdirector/15/30-30-45P_72hr/us/index_adr_bot-t_cp_bun.jsp
I am using version 12, which I do not see as available. I stayed with that as I do not need all the various bells and gimmicks that the later versions enable. There are free versions of several editors available. I cannot say what they are like however.
You could just buy a new Virb Elite and get a movie editor with the camera. The virb , to my eye, seems to have the best clarity of all the camera's that I have tried. It comes with a remote or you can just set it to record when the plane is moving and not worry about it. Three hour battery comes with it.
I think the camera is worth it even if I do not turn it into a movie for others to see, in that I can display it on my TV for the wife to see. 
Perhaps you can find out why Movie Maker only gives you a small 6x8 picture rather than a full screen. It used to be full screen, then changed. The quality of the finished project is not as good as it would be with another editing program however. Then again- it is free!
Larry 
On Mon, Mar 6, 2017 at 9:45 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

OK what editing software should I replace movie maker with?
On Mar 6, 2017 9:43 AM, "Larry Cottrell" <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:
Quote:
I was able to view it ok. I assume from the small size of the picture that it was originally made with "Movie Maker", would that be right? I am not sure why they want to shrink the size of the video's, but that is why I quit using it.

It looks nice and smooth, something that I could not obtain from a wing strut mounting. I recall telling Bill B that a mount on the wing strut would not work. It appears that I am going to have to qualify that to say that it won't work on a Firestar II. Oh well!
Larry
On Mon, Mar 6, 2017 at 8:38 AM, B Young <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Ok someone contacted me and said no joy on the video.....    It worked for me maybe because I was checked into the account...... 
Try this
https://vimeo.com/119686841
Password is       beekeeper
On Mar 6, 2017 8:19 AM, "B Young" <byoungplumbing(at)gmail.com (byoungplumbing(at)gmail.com)> wrote:
Quote:

Sorry the previous email should have been off list.   If you want to watch video the password is.     beekeeper         https://vimeo.com/user29057193/flying-the-bear-river
Boyd



--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.




--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
west1m



Joined: 19 Apr 2014
Posts: 111
Location: Hastings, MN

PostPosted: Mon Mar 06, 2017 1:17 pm    Post subject: Re: Video Reply with quote

Great movie, hope to see more.
Thanks for posting it.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
West1m
Hastings, MN
Back to top
View user's profile Send private message
Richard Pike



Joined: 09 Jan 2006
Posts: 1419
Location: Blountville, Tennessee

PostPosted: Mon Mar 06, 2017 7:51 pm    Post subject: Re: Video Reply with quote

Nice, thank you.

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and Grace really is amazing.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
jonealjr



Joined: 10 Feb 2017
Posts: 19

PostPosted: Sun Jul 16, 2017 7:37 pm    Post subject: Re: Video Reply with quote

Great Video

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message Send e-mail
lcottrell



Joined: 29 May 2006
Posts: 1324
Location: Jordan Valley, Or

PostPosted: Sun Jul 23, 2017 4:47 pm    Post subject: video Reply with quote

This should be the last video, since I am running out of new places to show you. I am a bit disappointed in this one. It was taken too early in the morning. The sun plays havoc with the sensors in the camera. The Virb editing program has changed and I left out all the metric's gathered by the camera. I started to redo it, but it was so much trouble and time consuming, that I scrapped the idea.

The area is magnificent however, and I am amazed at the courage and toughness that some one would have chosen it to "raise a family". My sources tell me that it was a Basque Sheep Herder from Spain that built the ranch and Lived there. 
https://vimeo.com/226653937   password  -   owyheeflyer
Larry
--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
west1m



Joined: 19 Apr 2014
Posts: 111
Location: Hastings, MN

PostPosted: Sun Jul 23, 2017 5:47 pm    Post subject: Re: Video Reply with quote

Another great video. I certainly hope that is not your last one.
Your videos are great and I am always looking forward to the next one.
Thank You for putting them up.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
West1m
Hastings, MN
Back to top
View user's profile Send private message
Richard Pike



Joined: 09 Jan 2006
Posts: 1419
Location: Blountville, Tennessee

PostPosted: Sun Jul 23, 2017 6:28 pm    Post subject: Re: Video Reply with quote

Thank you Larry. Nice way to end a great day.

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and Grace really is amazing.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
gdhelton(at)gmail.com
Guest





PostPosted: Sun Jul 23, 2017 7:25 pm    Post subject: video Reply with quote

Larry, wonderful video as usual! Are you using a Virb Elite? I'm thinking about buying one of these. I think the quality of your recording is excellent. I'd like another camera to go along with my GoPro Session 5. Thanks, George

Have a great day!

On Jul 23, 2017, at 8:43 PM, Larry Cottrell <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:
Quote:
This should be the last video, since I am running out of new places to show you. I am a bit disappointed in this one. It was taken too early in the morning. The sun plays havoc with the sensors in the camera. The Virb editing program has changed and I left out all the metric's gathered by the camera. I started to redo it, but it was so much trouble and time consuming, that I scrapped the idea.

The area is magnificent however, and I am amazed at the courage and toughness that some one would have chosen it to "raise a family". My sources tell me that it was a Basque Sheep Herder from Spain that built the ranch and Lived there.
https://vimeo.com/226653937 password - owyheeflyer
Larry
--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.





- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
lcottrell



Joined: 29 May 2006
Posts: 1324
Location: Jordan Valley, Or

PostPosted: Sun Jul 23, 2017 7:51 pm    Post subject: video Reply with quote

George, I am using a virb Elite. I think it is better than the go pro. I never was able to stabilize a go pro. The battery life is excellent, you can take pictures while recording as well. Right now they are only about $149. on Amazon.Larry
On Sun, Jul 23, 2017 at 9:25 PM, George Helton <gdhelton(at)gmail.com (gdhelton(at)gmail.com)> wrote:
Quote:
Larry, wonderful video as usual! Are you using a Virb Elite? I'm thinking about buying one of these. I think the quality of your recording is excellent. I'd like another camera to go along with my GoPro Session 5. Thanks, George 

Have a great day!

On Jul 23, 2017, at 8:43 PM, Larry Cottrell <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:
Quote:
This should be the last video, since I am running out of new places to show you. I am a bit disappointed in this one. It was taken too early in the morning. The sun plays havoc with the sensors in the camera. The Virb editing program has changed and I left out all the metric's gathered by the camera. I started to redo it, but it was so much trouble and time consuming, that I scrapped the idea.

The area is magnificent however, and I am amazed at the courage and toughness that some one would have chosen it to "raise a family". My sources tell me that it was a Basque Sheep Herder from Spain that built the ranch and Lived there. 
https://vimeo.com/226653937   password  -   owyheeflyer
Larry
--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.






--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
gdhelton(at)gmail.com
Guest





PostPosted: Mon Jul 24, 2017 2:55 am    Post subject: video Reply with quote

Thank you for your for input Larry. I'm going to order one today. The GoPro Session 5 is very small and works well. But, they are pricey and Virb Elite seems to have all of the same features for less money. Thank you! George

Have a great day!

On Jul 23, 2017, at 11:51 PM, Larry Cottrell <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:
Quote:
George, I am using a virb Elite. I think it is better than the go pro. I never was able to stabilize a go pro. The battery life is excellent, you can take pictures while recording as well. Right now they are only about $149. on Amazon.Larry
On Sun, Jul 23, 2017 at 9:25 PM, George Helton <gdhelton(at)gmail.com (gdhelton(at)gmail.com)> wrote:
Quote:
Larry, wonderful video as usual! Are you using a Virb Elite? I'm thinking about buying one of these. I think the quality of your recording is excellent. I'd like another camera to go along with my GoPro Session 5. Thanks, George

Have a great day!

On Jul 23, 2017, at 8:43 PM, Larry Cottrell <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:
Quote:
This should be the last video, since I am running out of new places to show you. I am a bit disappointed in this one. It was taken too early in the morning. The sun plays havoc with the sensors in the camera. The Virb editing program has changed and I left out all the metric's gathered by the camera. I started to redo it, but it was so much trouble and time consuming, that I scrapped the idea.

The area is magnificent however, and I am amazed at the courage and toughness that some one would have chosen it to "raise a family". My sources tell me that it was a Basque Sheep Herder from Spain that built the ranch and Lived there.
https://vimeo.com/226653937 password - owyheeflyer
Larry
--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.






--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.




- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
KelleyT



Joined: 06 May 2015
Posts: 7
Location: Colorado

PostPosted: Tue Jul 25, 2017 7:42 am    Post subject: Re: video Reply with quote

[quote="lcottrell"]This should be the last video, since I am running out of new places to show you. ....
Larry,

I hope that you make more videos. I really look forward to them and I want to thank you for all you have done so far.

I have been curious about your engine that you seem to be having good luck with so far. I think there would be many of us who would like to see a short video of you showing and talking about your engine and aircraft.

You are blessed to live in such beautiful county. Thanks again.

TK


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group