Posted: Mon Aug 28, 2017 10:55 am Post subject: Pics of Z14 crossfeed contactor placement on RV-10 firewall
I interpreted the Z-14 a bit differently and put the crossfeed contactor next to the other 2 back on the battery tray. This way I only ran one 'fat' wire (2awg) up to the starter contactor and Bus 1. The other wire was an 8awg for bus 2. All the interconnections between the 3 contactors are 2awg but they are very short runs as you can see here.
That seemed to me to be the most efficient wiring and placement scheme for the Z14 in a '10 but I'm sure there are other considerations. Please ignore if you've already considered this in favor of a firewall install.
On 8/28/2017 10:05 AM, jeff conner wrote:
Quote:
Anyone have a pic of their Z-14 firewall component arrangement that they could share via email?
I'm looking for the Bob K as drawn Z-14 dual power wires through firewall with crossfeed contactor on the firewall. I have seen many of the nice single power wire with the contactors in the back of the plane but will be using the crossfeed contactor on the FW and split busses.
Just curious how others have decided to arrange the components up front in their installations for this.
Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum