 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
GeorgeCoy
Joined: 02 Dec 2010
Posts: 308
|
 Posted: Wed Sep 20, 2017 5:41 am Post subject: Yak 52 Support |
 |
|
All Yak 52 owners, I recently made an inquiry to see if there are any Yak parts left at the factory in Romania. I received the following response:
The news is not good from our friends from the next door. They do not have any kind of parts for Yak-52. More than this, they destroyed the jigs and the fixtures and now they are not able to manufacture spare parts for Yak-52 airplanes. The same situation is with FESTIVAL airplane. The plant where was made the Yak-52 is totally changed. A lot of CNC routers machines are installed on the place where the general assembling of the airplanes was. Today there they manufacture parts for AIRBUS.
George Coy
CAS Ltd.
629 Airport Rd.
Swanton VT 05488 USA
802-868-5633 off
802-363-5782 cell
802-868-6632 Fax
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyacft.com/
SKYPE george.coy
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
William Halverson
Joined: 27 Feb 2010
Posts: 88
|
| Posted: Wed Sep 20, 2017 6:43 am Post subject: Yak 52 Support |
|
|
How bizarre... destroying fixtures and jigs ... instead of putting them up for auction ... how odd ...
Typos courtesy of Siri
On Sep 20, 2017, at 09:39, George S. Coy <george.coy(at)gmail.com (george.coy(at)gmail.com)> wrote:
| Quote: | <![endif]--> <![endif]-->
All Yak 52 owners, I recently made an inquiry to see if there are any Yak parts left at the factory in Romania. I received the following response:
The news is not good from our friends from the next door. They do not have any kind of parts for Yak-52. More than this, they destroyed the jigs and the fixtures and now they are not able to manufacture spare parts for Yak-52 airplanes. The same situation is with FESTIVAL airplane. The plant where was made the Yak-52 is totally changed. A lot of CNC routers machines are installed on the place where the general assembling of the airplanes was. Today there they manufacture parts for AIRBUS.
George Coy
CAS Ltd.
629 Airport Rd.
Swanton VT 05488 USA
802-868-5633 off
802-363-5782 cell
802-868-6632 Fax
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyacft.com/
SKYPE george.coy
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Clouddog
Joined: 02 Jun 2016
Posts: 117
Location: Lebanon, TN
|
| Posted: Wed Sep 20, 2017 7:24 am Post subject: Yak 52 Support |
|
|
They just don't understand Capitalism and how to make a buck out of old stuff. That's why we're flying old, headed for the boneyard/scrapyard aircraft and for the fine folks we have supplying and supporting us in parts.
On Sep 20, 2017 9:46 AM, "William Halverson" <william(at)netpros.net (william(at)netpros.net)> wrote: | Quote: | How bizarre... destroying fixtures and jigs ... instead of putting them up for auction ... how odd ...
Typos courtesy of Siri
On Sep 20, 2017, at 09:39, George S. Coy <george.coy(at)gmail.com (george.coy(at)gmail.com)> wrote:
| Quote: |
All Yak 52 owners, I recently made an inquiry to see if there are any Yak parts left at the factory in Romania. I received the following response:
The news is not good from our friends from the next door. They do not have any kind of parts for Yak-52. More than this, they destroyed the jigs and the fixtures and now they are not able to manufacture spare parts for Yak-52 airplanes. The same situation is with FESTIVAL airplane. The plant where was made the Yak-52 is totally changed. A lot of CNC routers machines are installed on the place where the general assembling of the airplanes was. Today there they manufacture parts for AIRBUS.Â
Â
Â
George Coy
CAS Ltd.
629 Airport Rd.
Swanton VT 05488 USA
[url=tel:(802)%20868-5633]802-868-5633[/url] off
[url=tel:(802)%20363-5782]802-363-5782[/url] cell
[url=tel:(802)%20868-6632]802-868-6632[/url] Fax
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyacft.com/
SKYPE george.coy
Â
|
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
wlannon(at)shaw.ca
Guest
|
| Posted: Wed Sep 20, 2017 9:57 am Post subject: Yak 52 Support |
|
|
Hey Greg;
Maybe they understand capitalism very well. Why bother with a buck from old stuff you can get a million from new.
Cheers;
Walt
From: Greg Wrobel (clouddog22(at)gmail.com)
Sent: Wednesday, September 20, 2017 8:23 AM
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak 52 Support
They just don't understand Capitalism and how to make a buck out of old stuff. That's why we're flying old, headed for the boneyard/scrapyard aircraft and for the fine folks we have supplying and supporting us in parts.
On Sep 20, 2017 9:46 AM, "William Halverson" <william(at)netpros.net (william(at)netpros.net)> wrote: | Quote: | How bizarre... destroying fixtures and jigs ... instead of putting them up for auction ... how odd ...
Typos courtesy of Siri
On Sep 20, 2017, at 09:39, George S. Coy <george.coy(at)gmail.com (george.coy(at)gmail.com)> wrote:
| Quote: |
All Yak 52 owners, I recently made an inquiry to see if there are any Yak parts left at the factory in Romania. I received the following response:
The news is not good from our friends from the next door. They do not have any kind of parts for Yak-52. More than this, they destroyed the jigs and the fixtures and now they are not able to manufacture spare parts for Yak-52 airplanes. The same situation is with FESTIVAL airplane. The plant where was made the Yak-52 is totally changed. A lot of CNC routers machines are installed on the place where the general assembling of the airplanes was. Today there they manufacture parts for AIRBUS.
George Coy
CAS Ltd.
629 Airport Rd.
Swanton VT 05488 USA
[url=tel:(802)%20868-5633]802-868-5633[/url] off
[url=tel:(802)%20363-5782]802-363-5782[/url] cell
[url=tel:(802)%20868-6632]802-868-6632[/url] Fax
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyacft.com/
SKYPE george.coy
|
|
 Virus-free. www.avast.com [url=#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Clouddog
Joined: 02 Jun 2016
Posts: 117
Location: Lebanon, TN
|
| Posted: Wed Sep 20, 2017 1:40 pm Post subject: Yak 52 Support |
|
|
Tuche 😎😎😎😎
On Sep 20, 2017 1:00 PM, "Walter Lannon" <wlannon(at)shaw.ca (wlannon(at)shaw.ca)> wrote: | Quote: | Hey Greg;
Â
Maybe they understand capitalism very well. Why bother with a buck from old stuff you can get a million from new.
Â
Cheers;
Walt
Â
From: Greg Wrobel (clouddog22(at)gmail.com)
Sent: Wednesday, September 20, 2017 8:23 AM
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak 52 Support
Â
They just don't understand Capitalism and how to make a buck out of old stuff. That's why we're flying old, headed for the boneyard/scrapyard aircraft and for the fine folks we have supplying and supporting us in parts. Â
Â
On Sep 20, 2017 9:46 AM, "William Halverson" <william(at)netpros.net (william(at)netpros.net)> wrote: | Quote: | How bizarre... destroying fixtures and jigs ... instead of putting them up for auction ... how odd ...
Typos courtesy of Siri
On Sep 20, 2017, at 09:39, George S. Coy <george.coy(at)gmail.com (george.coy(at)gmail.com)> wrote:
| Quote: |
All Yak 52 owners, I recently made an inquiry to see if there are any Yak parts left at the factory in Romania. I received the following response:
The news is not good from our friends from the next door. They do not have any kind of parts for Yak-52. More than this, they destroyed the jigs and the fixtures and now they are not able to manufacture spare parts for Yak-52 airplanes. The same situation is with FESTIVAL airplane. The plant where was made the Yak-52 is totally changed. A lot of CNC routers machines are installed on the place where the general assembling of the airplanes was. Today there they manufacture parts for AIRBUS.Â
Â
Â
George Coy
CAS Ltd.
629 Airport Rd.
Swanton VT 05488 USA
[url=tel:(802)%20868-5633]802-868-5633[/url] off
[url=tel:(802)%20363-5782]802-363-5782[/url] cell
[url=tel:(802)%20868-6632]802-868-6632[/url] Fax
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyacft.com/
SKYPE george.coy
Â
|
|
Virus-free. www.avast.com [url=#m_1535981820534744723_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
cjpilot710(at)aol.com
Guest
|
| Posted: Wed Sep 20, 2017 7:00 pm Post subject: Yak 52 Support |
|
|
What are we talking about here? Wing panels, vertical or horizontal stabilizer, engine parts or flight controls? If the warbird community can build a mustang from just a data plate, why not a simple Y-52? I have seen nothing on the CJ or Yak that is anymore exotic than a beefed up Cessna. Yes gentlemen all it takes is money and time. Mostly time. Maybe its time for someone out there who isn't over the hill, to look at a small market opportunely for a steady income. A good tin-smith is all we need.
Jim "Pappy" Goolsby
In a message dated 9/20/2017 5:41:21 P.M. Eastern Daylight Time, clouddog22(at)gmail.com writes:
| Quote: | Tuche 😎😎😎😎
On Sep 20, 2017 1:00 PM, "Walter Lannon" <wlannon(at)shaw.ca (wlannon(at)shaw.ca)> wrote: | Quote: | Hey Greg;
Maybe they understand capitalism very well. Why bother with a buck from old stuff you can get a million from new.
Cheers;
Walt
From: Greg Wrobel (clouddog22(at)gmail.com)
Sent: Wednesday, September 20, 2017 8:23 AM
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak 52 Support
They just don't understand Capitalism and how to make a buck out of old stuff. That's why we're flying old, headed for the boneyard/scrapyard aircraft and for the fine folks we have supplying and supporting us in parts.
On Sep 20, 2017 9:46 AM, "William Halverson" <william(at)netpros.net (william(at)netpros.net)> wrote: | Quote: | How bizarre... destroying fixtures and jigs ... instead of putting them up for auction ... how odd ...
Typos courtesy of Siri
On Sep 20, 2017, at 09:39, George S. Coy <george.coy(at)gmail.com (george.coy(at)gmail.com)> wrote:
| Quote: |
All Yak 52 owners, I recently made an inquiry to see if there are any Yak parts left at the factory in Romania. I received the following response:
The news is not good from our friends from the next door. They do not have any kind of parts for Yak-52. More than this, they destroyed the jigs and the fixtures and now they are not able to manufacture spare parts for Yak-52 airplanes. The same situation is with FESTIVAL airplane. The plant where was made the Yak-52 is totally changed. A lot of CNC routers machines are installed on the place where the general assembling of the airplanes was. Today there they manufacture parts for AIRBUS.
George Coy
CAS Ltd.
629 Airport Rd.
Swanton VT 05488 USA
[url=tel:(802)%20868-5633]802-868-5633[/url] off
[url=tel:(802)%20363-5782]802-363-5782[/url] cell
[url=tel:(802)%20868-6632]802-868-6632[/url] Fax
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyacft.com/
SKYPE george.coy
|
|
Virus-free. www.avast.com
|
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
richard.goode(at)russiana
Guest
|
| Posted: Wed Sep 20, 2017 11:38 pm Post subject: Yak 52 Support |
|
|
Yes, earlier this year, Aerostar, of course the manufacturer of all 52s asked Aerometal, my partner in Hungary if they could make 10 sets of new engine mounts for the 52, but of course lacking the original jigs. We worked out a way that this could be done, and they then went rather quiet!
Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Hereford
HR5 3LW
Tel: +44 (0) 1544 340120
Fax: +44 (0) 1544 340129
www.russianaeros.com
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of George S. Coy
Sent: 20 September 2017 14:40
To: yak-list(at)matronics.com
Subject: Yak 52 Support
All Yak 52 owners, I recently made an inquiry to see if there are any Yak parts left at the factory in Romania. I received the following response:
The news is not good from our friends from the next door. They do not have any kind of parts for Yak-52. More than this, they destroyed the jigs and the fixtures and now they are not able to manufacture spare parts for Yak-52 airplanes. The same situation is with FESTIVAL airplane. The plant where was made the Yak-52 is totally changed. A lot of CNC routers machines are installed on the place where the general assembling of the airplanes was. Today there they manufacture parts for AIRBUS.
George Coy
CAS Ltd.
629 Airport Rd.
Swanton VT 05488 USA
802-868-5633 off
802-363-5782 cell
802-868-6632 Fax
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyacft.com/
SKYPE george.coy
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
jill(at)m-14p.com
Guest
|
| Posted: Thu Sep 21, 2017 5:58 am Post subject: Yak 52 Support |
|
|
Group,
The phone calls, texts and e-mails are coming in off of George's
announcement. Relax. Yes, it is a shame if they destroyed the jigs and
begs the questions of why they did not inform George that this was going to
happen. It doesn't matter because it doesn't change the outcome. Piper did
the same thing as I recall Clyde Smith - the Cub Doctor - telling me. I
live at an airport where 1000s of WWII aircraft were chopped into bits by a
huge guillotine and smelted. Aircraft are still be chopped to bits here,
albeit airliners.
We have been informing our customers since October 2015, that production had
ceased on the Yak 52 and they were no longer supplying airframe parts.
Additionally, we have been manufacturing parts for the Yak 52 for quite some
time and working collectively with others, who also manufacture parts.
Beginning in 1992, when Carl (Hays) started importing on the West coast, we
accumulated a lot of parts with an eye to the future and when this day might
come. Working exclusively on these aircraft and engines, we know the
consistent failures and where to direct our resources.
The latest part that we have duplicated, in whole, is the cowl lord mount
bushings for the Yak 52. A seemingly inconsequential part, but in actuality
it is very important for the proper fit and sealing of the engine cowl. One
thing that people should realize is that our aircraft are considered "low
volume" when we walk into a machine shop and request a part to be
manufactured. Most often, we have to meet a minimum that forces us to hold
inventory on our end. We currently manufacture hundreds of parts for the
Yak 52 and M-14P. We will continue to do so, as our complete dedication is
to keep our customer in the air.
If you are interested in what we are doing, visit our Facebook Page: M-14P,
Inc. I post a lot of what is currently happening, there.
In my opinion, what we are seeing is a market shift where many of these
aircraft were purchased at "fire sale" prices in the 90's and now they will
become limited and collectible. The aim is to keep them affordable.
Jill Gernetzke
M-14P, Inc.
www.m-14p.com
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
heaysr(at)telus.net
Guest
|
| Posted: Thu Sep 21, 2017 8:39 pm Post subject: Yak 52 Support |
|
|
Hey Jill,
Yours is an important post for the Yak community and I for one truly
appreciate what you and Carl are doing to keep us "in the air".
"Us" includes the less talked about Yak 55 and Yak 55M guys.
Best regards
Royden
--
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
