Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

homebrew alternative to Ducati, etc regulators??

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
ceengland7(at)gmail.com
Guest





PostPosted: Mon Oct 30, 2017 1:03 pm    Post subject: homebrew alternative to Ducati, etc regulators?? Reply with quote

With all the regulator failures on Rotax (insert version here)
regulators, I've been wondering about whether the job could be
accomplished using a different tack.

What about a diode bridge using diodes that can handle the higher
frequencies being generated by the 'wild' output from PM dynamos,
followed by a 'buck' style switching regulator that could withstand the
fairly high DC voltage that would result from high rpm and low load.
Both the diode bridge and the 'switcher' might well be off-the-shelf
items, that could be wired together to get a very high efficiency DC
output. If I've been correctly interpreting some of the data on the
traditional regulators, their efficiency is atrocious (which probably
helps explain the horrible failure rate). A bit of filtering might be
required to clean up the switcher's noise, but the idea seems worth
exploring. If I had a dog in the hunt, I'd certainly take a shot at
something like that.

Charlie

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
rickofudall



Joined: 19 Sep 2009
Posts: 1392
Location: Udall, KS, USA

PostPosted: Mon Oct 30, 2017 8:39 pm    Post subject: homebrew alternative to Ducati, etc regulators?? Reply with quote

There are lots of dynamos on lots of motorcycle engines, tractors and industrial engines. Surely there must be an RR out there from the likes of John Deere, Kubota, or Harley Davidson. If not there then the aftermarket has units from Accel, Custom Chrome, JP Cycles or Dennis Kirk just to name a few.As an aside, the first thing you learn when you work on Rotax engines is that the first place to look when there's a problem is how the owner deviated from the engine's Installation Manual.
Just sayin'
Rick Girard
On Mon, Oct 30, 2017 at 9:58 PM, C&K <yellowduckduo(at)gmail.com (yellowduckduo(at)gmail.com)> wrote:
Quote:
--> AeroElectric-List message posted by: C&K <yellowduckduo(at)gmail.com (yellowduckduo(at)gmail.com)>

Charlie, I agree that 80 watts dissipation while outputting 240 watts of power is not impressive. I suspect it is tough to do a lot better on a 12volt system though. 20 amps through any full wave silicon bridge arrangement is perhaps 30 watts lost and I'd guess at least another 20 watts from the buck converter inductor, mosfet(s), and diode. Such a commercially built converter would be larger and more expensive compared to existing after market offerings. Advantages should include a couple more amps of output and a I think a generally cooler running stator.

I cobbled together a 50khz dc/dc buck converter for a 120 volt solar array for perhaps $30. of parts so a homebrew should be doable if one really wanted to. The output from my unit is electrically fairly noisy.

Ken

On 30/10/2017 5:06 PM, Charlie England wrote:
Quote:
--> AeroElectric-List message posted by: Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)>

With all the regulator failures on Rotax (insert version here) regulators, I've been wondering about whether the job could be accomplished using a different tack.

What about a diode bridge using diodes that can handle the higher frequencies being generated by the 'wild' output from PM dynamos, followed by a 'buck' style switching regulator that could withstand the fairly high DC voltage that would result from high rpm and low load. Both the diode bridge and the 'switcher' might well be off-the-shelf items, that could be wired together to get a very high efficiency DC output. If I've been correctly interpreting some of the data on the traditional regulators, their efficiency is atrocious (which probably helps explain the horrible failure rate). A bit of filtering might be required to clean up the switcher's noise, but the idea seems worth exploring. If I had a dog in the hunt, I'd certainly take a shot at something like that.

Charlie

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus






====================================
-
Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================







--
“Blessed are the cracked, for they shall let in the light.”   Groucho Marx


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
The smallest miracle right in front of you is enough to make you happy....
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group