Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Front Canopy seal

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> L29-List
View previous topic :: View next topic  
Author Message
skidmk



Joined: 19 Nov 2007
Posts: 171
Location: Ottawa, Ontario

PostPosted: Mon Nov 20, 2017 10:57 am    Post subject: Front Canopy seal Reply with quote

Ok, it was working. Now canopy closed and locked. N2 in the system (tested with 50 showing), push up the canopy seal lever, can here N2 moving. But no expansion on the seal.

Anyone think of something other than a bad seal? (would I be able to hear N2 leaking out of the seal if it were bad?)

thanks


- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List

_________________
Mike "Skidmk" Bourget
Ottawa, Ontario
Back to top
View user's profile Send private message
Dawg



Joined: 19 May 2013
Posts: 355

PostPosted: Mon Nov 20, 2017 3:49 pm    Post subject: Front Canopy seal Reply with quote

Late to the party. U probably did most of this.

Front or rear?

If front, the usual issue is the seal in the fill-tube behind your right shoulder. They bend easy, the rubber seal dries out. Sit in the front, facing backwards, close canopy, seal it and listen. If you hear air at the tube, grab it and force it tighter.
Does the seal inflate at all?
slide your ear or a plastic hose along the canopy. (One end in your ear.)
Move the canopy seal knob further forward or aft and listen. There is also a pressure reducer valve, and the air valve at the knob can leak.
Spray soapy water along the seal.
If it is not inflating at all, it may be the switching in the canopy locking handle.
Have you used the outside handle when sealing it from the outside? Or wiggling the canopy handle inside, pushing harder?

If it’s the rear, throw it in the pool. Watch the bubbles.

Or fly only in warm weather and don’t pressurize.

Quote:
On Nov 20, 2017, at 11:57, skidmk <skidmk(at)gmail.com> wrote:



Ok, it was working. Now canopy closed and locked. N2 in the system (tested with 50 showing), push up the canopy seal lever, can here N2 moving. But no expansion on the seal.

Anyone think of something other than a bad seal? (would I be able to hear N2 leaking out of the seal if it were bad?)

thanks

--------
Mike &quot;Skidmk&quot; Bourget
Ottawa, Ontario




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=475324#475324











- The Matronics L29-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?L29-List

_________________
Dawg
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> L29-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group