Matronics Email Lists :: View topic - Canopy latch modification.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Canopy latch modification.

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

AlaskaChang801

Joined: 26 Jan 2018
Posts: 36

Posted: Tue Feb 20, 2018 9:41 am Post subject: Canopy latch modification.

Anyone have a picture of a canopy latch mod where they added to the push button to make opening the canopy from the outside. 



Thanks.

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

dsavarese0812(at)bellsout
Guest

Posted: Tue Feb 20, 2018 10:37 am Post subject: Canopy latch modification.

Try this.

Drill and tap the center of the push button for a 10-32 thread.  Using an AN3-10 bolt (or close to it), thread the bolt into the drilled and tapped 10-32 hole in the button.  Next, cut off the head of the bolt and finish off the end of the bolt with a file.  The length of bolt after it is cut of should be about 1/2" to 5/8".   To open, simply push down on the end of the bolt rather than trying to push in on the button.

If you want long term security for the bolt, put a small amount of JB Weld epoxy on the bolt threads before you thread the bolt into the hole.



Dennis



       From: AlaskaChang801 <themilnes95(at)gmail.com>

 To: yak-list(at)matronics.com 

 Sent: Tuesday, February 20, 2018 12:44 PM

 Subject: Canopy latch modification.

  

 

--> Yak-List message posted by: "AlaskaChang801" <themilnes95(at)gmail.com (themilnes95(at)gmail.com)>



Anyone have a picture of a canopy latch mod where they added to the push button to make opening the canopy from the outside. 



Thanks.



Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=478138#478138



       - The Yak-List Email Forum -



_=====================



http://forums.matronics.com



http://wiki.matro========================

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

AlaskaChang801

Joined: 26 Jan 2018
Posts: 36

Posted: Tue Feb 20, 2018 11:43 am Post subject: Re: Canopy latch modification.

Thanks for the reply and it’s exactly how Doug Sapp explained someone had done it, so I appreciate you elaborating on the mod. 

I’ll give it a try.

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Clouddog

Joined: 02 Jun 2016
Posts: 116
Location: Lebanon, TN

Posted: Sat Feb 24, 2018 4:47 am Post subject: Canopy latch modification.

I'll get a picture to you when I get home next week. Basically I drilled a 3/16" hole, tapped it, found a stainless bolt with a round hex key round head, slid a plastic sleeve over the threads and that's it. Make sure you will into the push button in a location to get s good depth for the bolt to screw into.



I'm out if town but will try and get a picture when I return.

On Feb 20, 2018 12:46 PM, "AlaskaChang801" <themilnes95(at)gmail.com (themilnes95(at)gmail.com)> wrote: 	  Quote: 	
		  --> Yak-List message posted by: "AlaskaChang801" <themilnes95(at)gmail.com (themilnes95(at)gmail.com)>

 

 Anyone have a picture of a canopy latch mod where they added to the push button to make opening the canopy from the outside.

 

 Thanks.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=478138#478138

 

 

 

 

 

 

 ====================================

 List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Yak-List

 ====================================

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ====================================

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ====================================

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ====================================

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

AlaskaChang801

Joined: 26 Jan 2018
Posts: 36

Posted: Sun Feb 25, 2018 6:16 pm Post subject: Re: Canopy latch modification.

CloudDog. I’d really appreciate the picture. Thanks.

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

stephen.hayne

Joined: 01 Nov 2013
Posts: 59
Location: United States

Posted: Wed Feb 28, 2018 9:21 am Post subject: Re: Canopy latch modification.

I did this, but instead of a bolt, used a "single-wing" bolt from ACE - can't find a pic at this time, but the bolt looked a bit like this, but without the hole... much easier to press on.



https://www.e-rigging.com/assets/images/p/1244/five-sixteenths-inch-x-three-eighths-inch-stainless-eye-tab-bolt.jpg



Only downside is that the steel seems a bit soft and it has "bent" just a little in use.  With the tab, though, it is easy to take out and replace...

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
-
Stephen Hayne, Cyber Security Consultant, Professor Emeritus (retired)
443LM Nanchang CJA
http://selfsynchronize.com/hayne/plane/cj6.asp

AlaskaChang801

Joined: 26 Jan 2018
Posts: 36

Posted: Wed Feb 28, 2018 2:31 pm Post subject: Re: Canopy latch modification.

 	  stephen.hayne wrote: 	
		  I did this, but instead of a bolt, used a "single-wing" bolt from ACE - can't find a pic at this time, but the bolt looked a bit like this, but without the hole... much easier to press on.



https://www.e-rigging.com/assets/images/p/1244/five-sixteenths-inch-x-three-eighths-inch-stainless-eye-tab-bolt.jpg



Only downside is that the steel seems a bit soft and it has "bent" just a little in use.  With the tab, though, it is easy to take out and replace... 	




Thanks for the input and will look into it. I have a couple AN bolts coming tomorrow and will go from there.

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum