Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Firefly / Firestar windshield
Goto page Previous  1, 2
 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
Eugene Zimmerman



Joined: 10 Jan 2006
Posts: 392

PostPosted: Mon Sep 10, 2018 2:20 pm    Post subject: Firefly / Firestar windshield Reply with quote

Gravity and wind pressure holds them firmly in place. No latch ever needed. I made a latch on the first one and soon found it to be totally unnecessary. Often thought about making an easy change summer partial screen the same way but never did yet. Guess I’m getting too lazy in my old age.
Quote:
On Sep 10, 2018, at 5:57 PM, Richard Pike <thegreybaron(at)charter.net (thegreybaron(at)charter.net)> wrote:
Eugene: do your flip up canopies latch in the back, or does gravity just hold them in place?


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
Eugene Zimmerman



Joined: 10 Jan 2006
Posts: 392

PostPosted: Mon Sep 10, 2018 2:32 pm    Post subject: Re: Firefly / Firestar windshield Reply with quote

Thanks, Arty

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
gdhelton(at)gmail.com
Guest





PostPosted: Wed Sep 12, 2018 4:37 am    Post subject: Firefly / Firestar windshield Reply with quote

Bill , I took a few better pictures yesterday, if you still interested?

George H.
Firestar
Mesick, Michigan

Sent from my iPhone

Quote:
On Sep 10, 2018, at 5:53 AM, Bill Berle <victorbravo(at)sbcglobal.net> wrote:





"Jerry-TS-MkII" <12flybellaire(at)gmail.com>

Say if you guys have some good photos of windshields and/or latches please post them here.
I'll be trying to figure this one out on mine before long.

Thanks, Jerry

-------------------------------------------

Me too. I installed a fixed windshield after speaking with John H, and it is indeed more comfortable, but getting in and out of the aircraft is quite a spectacle. If anyone has details of a good safe latching system that allows easy entry/exit I'd love to see it.


====================================

====================================
====================================
====================================
====================================
Quote:





- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



image1.jpeg
 Description:
 Filesize:  876.68 KB
 Viewed:  10818 Time(s)

image1.jpeg


Back to top
victorbravo(at)sbcglobal.
Guest





PostPosted: Wed Sep 12, 2018 10:26 am    Post subject: Firefly / Firestar windshield Reply with quote

NOW I get it... the forward pin / prop rod is separate from the rear latch pin.

I kept wondering how the heck it would work if those two were the same part.

So the prop rod is not permanently attached to the windshield frame or the fuselage... it is completely removable? Or does it hnge or attach to something in order to be used for two different jobs?

Bill Berle
www.ezflaphandle.com  - safety & performance upgrade for light aircraft
www.grantstar.net           - winning proposals for non-profit and for-profit entities

--------------------------------------------
On Wed, 9/12/18, George Helton <gdhelton(at)gmail.com> wrote:

Subject: Re: Re: Firefly / Firestar windshield
To: kolb-list(at)matronics.com
Date: Wednesday, September 12, 2018, 5:35 AM

Bill , I took a few better pictures
yesterday, if you still interested?
George H.
Firestar
Mesick, Michigan

Sent from my iPhone

> On Sep 10, 2018, at 5:53 AM, Bill Berle <victorbravo(at)sbcglobal.net>
wrote:
>
>
>
>
>
> "Jerry-TS-MkII" <12flybellaire(at)gmail.com>
>
> Say if you guys have some good photos of windshields
and/or latches please post them here.
> I'll be trying to figure this one out on mine before
long.
>
> Thanks, Jerry
>
> ------------------------------------------- 
>
> Me too. I installed a fixed windshield after speaking
with John H, and it is indeed more comfortable, but getting
in and out of the aircraft is quite a spectacle. If anyone
has details of a good safe latching system that allows easy
entry/exit I'd love to see it.
>
>
====================================
====================================
====================================
====================================
====================================
>
>
>


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
capedavis(at)yahoo.com
Guest





PostPosted: Wed Sep 12, 2018 11:10 am    Post subject: Firefly / Firestar windshield Reply with quote

Hi guys Where are these pics your talking about? They aren’t secret are they ? I can’t find them

Sent from my iPhone

Quote:
On Sep 12, 2018, at 2:23 PM, Bill Berle <victorbravo(at)sbcglobal.net> wrote:



NOW I get it... the forward pin / prop rod is separate from the rear latch pin.

I kept wondering how the heck it would work if those two were the same part.

So the prop rod is not permanently attached to the windshield frame or the fuselage... it is completely removable? Or does it hnge or attach to something in order to be used for two different jobs?

Bill Berle
www.ezflaphandle.com - safety & performance upgrade for light aircraft
www.grantstar.net - winning proposals for non-profit and for-profit entities

--------------------------------------------
On Wed, 9/12/18, George Helton <gdhelton(at)gmail.com> wrote:

Subject: Re: Re: Firefly / Firestar windshield
To: kolb-list(at)matronics.com
Date: Wednesday, September 12, 2018, 5:35 AM

Bill , I took a few better pictures
yesterday, if you still interested?
George H.
Firestar
Mesick, Michigan

Sent from my iPhone

> On Sep 10, 2018, at 5:53 AM, Bill Berle <victorbravo(at)sbcglobal.net>
wrote:
>
>
>
>
>
> "Jerry-TS-MkII" <12flybellaire(at)gmail.com>
>
> Say if you guys have some good photos of windshields
and/or latches please post them here.
> I'll be trying to figure this one out on mine before
long.
>
> Thanks, Jerry
>
> -------------------------------------------
>
> Me too. I installed a fixed windshield after speaking
with John H, and it is indeed more comfortable, but getting
in and out of the aircraft is quite a spectacle. If anyone
has details of a good safe latching system that allows easy
entry/exit I'd love to see it.
>
>
====================================
====================================
====================================
====================================
====================================
>
>
>






- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
gdhelton(at)gmail.com
Guest





PostPosted: Wed Sep 12, 2018 11:19 am    Post subject: Firefly / Firestar windshield Reply with quote

Yes, Bill. It is attached to the frame rail by piece of plastic fuel line. It keeps the prop rod in place while entering and exiting the air by lifting the Lexan upward or downward. You flex the rod into place this locking the front down. The you put candy rail to cockpit rail and lock the back down. It’s pretty easy
Sent from my iPhone

Quote:
On Sep 12, 2018, at 2:23 PM, Bill Berle <victorbravo(at)sbcglobal.net> wrote:



NOW I get it... the forward pin / prop rod is separate from the rear latch pin.

I kept wondering how the heck it would work if those two were the same part.

So the prop rod is not permanently attached to the windshield frame or the fuselage... it is completely removable? Or does it hnge or attach to something in order to be used for two different jobs?

Bill Berle
www.ezflaphandle.com - safety & performance upgrade for light aircraft
www.grantstar.net - winning proposals for non-profit and for-profit entities

--------------------------------------------
On Wed, 9/12/18, George Helton <gdhelton(at)gmail.com> wrote:

Subject: Re: Re: Firefly / Firestar windshield
To: kolb-list(at)matronics.com
Date: Wednesday, September 12, 2018, 5:35 AM

Bill , I took a few better pictures
yesterday, if you still interested?
George H.
Firestar
Mesick, Michigan

Sent from my iPhone

> On Sep 10, 2018, at 5:53 AM, Bill Berle <victorbravo(at)sbcglobal.net>
wrote:
>
>
>
>
>
> "Jerry-TS-MkII" <12flybellaire(at)gmail.com>
>
> Say if you guys have some good photos of windshields
and/or latches please post them here.
> I'll be trying to figure this one out on mine before
long.
>
> Thanks, Jerry
>
> -------------------------------------------
>
> Me too. I installed a fixed windshield after speaking
with John H, and it is indeed more comfortable, but getting
in and out of the aircraft is quite a spectacle. If anyone
has details of a good safe latching system that allows easy
entry/exit I'd love to see it.
>
>
=========================> =========================> =========================> =========================> =========================>>
>
>

====================================

====================================
====================================
====================================
====================================
Quote:





- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



image1.jpeg
 Description:
 Filesize:  847.83 KB
 Viewed:  10814 Time(s)

image1.jpeg



image2.jpeg
 Description:
 Filesize:  876.68 KB
 Viewed:  10814 Time(s)

image2.jpeg



image3.jpeg
 Description:
 Filesize:  797.34 KB
 Viewed:  10814 Time(s)

image3.jpeg



image4.jpeg
 Description:
 Filesize:  626.46 KB
 Viewed:  10814 Time(s)

image4.jpeg


Back to top
Mcabbage



Joined: 08 Sep 2013
Posts: 41
Location: MA.

PostPosted: Wed Sep 19, 2018 5:07 am    Post subject: Re: Firefly / Firestar windshield Reply with quote

Wow nice work Eugene!

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
2007 Firestar 2 503 N203SD
Moster 185 Flattop PPG/Sky K2 Paraglider
Trike Buggy Soaring Trike & Northwing Stratus XP
Back to top
View user's profile Send private message
west1m



Joined: 19 Apr 2014
Posts: 155
Location: Hastings, MN

PostPosted: Sun Nov 25, 2018 8:02 am    Post subject: Re: Firefly / Firestar windshield Reply with quote

I am installing the "Kolb Full Canopy" right now and I plan on using your latch mechanism . In the latch picture of the rear, How is the back half of the latch and aluminum piece attached to the Cro-Molly tube ? Do those screws thread into the tube?

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



latch.jpg
 Description:
 Filesize:  206.06 KB
 Viewed:  10332 Time(s)

latch.jpg



_________________
West1m
Hastings, MN
Back to top
View user's profile Send private message
gdhelton(at)gmail.com
Guest





PostPosted: Sun Nov 25, 2018 1:51 pm    Post subject: Firefly / Firestar windshield Reply with quote

No, I custom cut the screws and install them with a drop of blue locktite. The small piece of aluminum channel is attached with two 1/8X1/4”pull rivets. See pictures attached. Note that latch has been bent 90 degrees.

Sent from my iPhone

Quote:
On Nov 25, 2018, at 11:02 AM, west1m <west1m(at)hotmail.com> wrote:



I am installing the "Kolb Full Canopy" right now and I plan on using your latch mechanism . In the latch picture of the rear, How is the back half of the latch and aluminum piece attached to the Cro-Molly tube ? Do those screws thread into the tube?

--------
West1m
Hastings, MN




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=485627#485627




Attachments:

http://forums.matronics.com//files/latch_307.jpg



====================================

====================================
====================================
====================================
====================================
====================================
Quote:





- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



image1.jpeg
 Description:
 Filesize:  656.3 KB
 Viewed:  10323 Time(s)

image1.jpeg



image2.jpeg
 Description:
 Filesize:  643.77 KB
 Viewed:  10323 Time(s)

image2.jpeg


Back to top
west1m



Joined: 19 Apr 2014
Posts: 155
Location: Hastings, MN

PostPosted: Mon Nov 26, 2018 12:37 pm    Post subject: Re: Firefly / Firestar windshield Reply with quote

Looks good, thanks for the pictures and info.

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
West1m
Hastings, MN
Back to top
View user's profile Send private message
Richard Pike



Joined: 09 Jan 2006
Posts: 1669
Location: Blountville, Tennessee

PostPosted: Wed Jan 09, 2019 2:04 pm    Post subject: Re: Firefly / Firestar windshield Reply with quote

It's done! And now that it's done, I would like to thank the guys on this list for all their good ideas. I especially like John Hauck's windshield shape and size, and tried to get as close to it as possible but still use just one piece of Lexan.

I especially liked Gene Zimmerman's folding arrangement, because I too was having a terrible time getting in and out w/o bashing the windshield with my feet. OTOH, Gene's has a full frame and we are trying to keep the weight down and keep it Part 103 legal. With no frame, it was way too flexible.

So here is the result, pivots in the front, uses minimal hardware, just enough to keep it in shape. When you pull it down into flight position, a pin fits through the aft original windshield mounting tab on the fuselage frame, one on each side.

Once the pins are in place, the lever swings down to keep the pins from pulling back out. Locks everything in place.

Had to modify the fairing with big mounting pads to make the windshield pivot points parallel with the side of the fairing, otherwise the windshield bulged out with a big gap along the sides.

Now I just need the weather to warm up and calm down, and we can try out the new windshield and the new engine - we also swapped out the free air 277 for a fan cooled one. Assuming that everything works OK, then we modify the 277 to dual ignition.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



P1070061 (Medium).jpeg
 Description:
 Filesize:  168.63 KB
 Viewed:  9905 Time(s)

P1070061 (Medium).jpeg



P1070067 (Medium).jpeg
 Description:
 Filesize:  181.18 KB
 Viewed:  9905 Time(s)

P1070067 (Medium).jpeg



P1070080 (Medium).jpeg
 Description:
 Filesize:  215.64 KB
 Viewed:  9905 Time(s)

P1070080 (Medium).jpeg



P1070077 (Medium).jpeg
 Description:
 Filesize:  221.21 KB
 Viewed:  9905 Time(s)

P1070077 (Medium).jpeg



P1070076 (Medium).jpeg
 Description:
 Filesize:  214.05 KB
 Viewed:  9905 Time(s)

P1070076 (Medium).jpeg



P1070078 (Medium).jpeg
 Description:
 Filesize:  159.91 KB
 Viewed:  9905 Time(s)

P1070078 (Medium).jpeg



P1070079 (Medium).jpeg
 Description:
 Filesize:  169.4 KB
 Viewed:  9905 Time(s)

P1070079 (Medium).jpeg



P1070075 (Medium).jpeg
 Description:
 Filesize:  183.71 KB
 Viewed:  9905 Time(s)

P1070075 (Medium).jpeg



P1070070 (Medium).jpeg
 Description:
 Filesize:  287.69 KB
 Viewed:  9905 Time(s)

P1070070 (Medium).jpeg



_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
lcottrell



Joined: 29 May 2006
Posts: 1490
Location: Jordan Valley, Or

PostPosted: Wed Jan 09, 2019 2:41 pm    Post subject: Firefly / Firestar windshield Reply with quote

It looks pretty good, and I congratulate you on your design thinking. I had a version of that type of wind screen when I first got my plane. It might have been a bit shorter but the wind always hit me just about on my upper lip. If a fella was wearing a helmet it was no problem, but when I installed a radio I was too cheap to buy a helmet with sound, so I did without. You had to stick ear plugs in each nostril to keep the snot from running up my glasses. Smile A bit hard to clean.
Larry 
On Wed, Jan 9, 2019 at 3:06 PM Richard Pike <thegreybaron(at)charter.net (thegreybaron(at)charter.net)> wrote:

Quote:
--> Kolb-List message posted by: "Richard Pike" <thegreybaron(at)charter.net (thegreybaron(at)charter.net)>

It's done! And now that it's done, I would like to thank the guys on this list for all their good ideas. I especially like John Hauck's windshield shape and size, and tried to get as close to it as possible but still use just one piece of Lexan.

I especially liked Gene Zimmerman's folding arrangement, because I too was having a terrible time getting in and out w/o bashing the windshield with my feet. OTOH, Gene's has a full frame and we are trying to keep the weight down and keep it Part 103 legal. With no frame, it was way too flexible.

So here is the result, pivots in the front, uses minimal hardware, just enough to keep it in shape. When you pull it down into flight position, a pin fits through the aft original windshield mounting tab on the fuselage frame, one on each side.

Once the pins are in place, the lever swings down to keep them from pulling back out. Locks everything in place.

Had to modify the fairing with big mounting pads to make the windshield pivot points parallel with the side of the fairing, otherwise the windshield bulged out with a big gap along the sides.

Now I just need the weather to warm up and calm down, and we can try out the new windshield and the new engine - we also swapped out the free air 277 for a fan cooled one. Assuming that everything works OK, then we modify the 277 to dual ignition.

--------
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kolb Firefly Part 103 legal (Redoing the Firefly windshield)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=486857#486857




Attachments:

http://forums.matronics.com//files/p1070061_medium_316.jpeg
http://forums.matronics.com//files/p1070067_medium_192.jpeg
http://forums.matronics.com//files/p1070080_medium_182.jpeg
http://forums.matronics.com//files/p1070077_medium_996.jpeg
http://forums.matronics.com//files/p1070076_medium_142.jpeg
http://forums.matronics.com//files/p1070078_medium_210.jpeg
http://forums.matronics.com//files/p1070079_medium_178.jpeg
http://forums.matronics.com//files/p1070075_medium_446.jpeg
http://forums.matronics.com//files/p1070070_medium_429.jpeg



===========
br> fts!)
r> > e.com" rel="noreferrer" target="_blank">www.mypilotstore.com
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
          -Matt Dralle, List Admin.
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========




--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
John Hauck



Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

PostPosted: Wed Jan 09, 2019 4:13 pm    Post subject: Firefly / Firestar windshield Reply with quote

How gross!  Wink

I did design mine a little different.  There's 4130 bow with tabs to mount the instrument panel and fairing. The new brace moved the instrument panel rearward about 18 inches or more closer to the pilot.  That full bow was necessary to keep the air stream from trying to flatten the windshield.  I kept the same angle as the nose pod to make it a little more aerodynamic.  The small 5" fairing came after a flight to the Flight Farm in Monterey, NY, 1988.  I had to wear a David Clark cloth helmet and wear goggles because the wind stream hit me right in the face.  I eventually lost all the hide off my nose and between the top of the goggles and the bottom rim of the helmet from sun and wind burn.  In 1989, I flew the FS back to the Flight Farm and OSH with the fairing.  No sweat on losing hide.  I wore a baseball cap and my sun glasses.  Much nicer and got a couple more mph cruise speed out of the 447.  The new fairing kicked the wind right over the top of the wing.

I also included a photo of Homer's windshield on the 1985 Oshkosh Grand Champion UL he rebuilt after many years.  Dick Rahill crashed it at OSH 1989.  Stalled making a tight steep descending turn on final.  I have a snap shot of him crashing.  I took it while sitting in the cockpit of my FS at the approach end of the airstrip.


john h
mkIII
Titus, Alabama



From: owner-kolb-list-server(at)matronics.com [mailto:owner-kolb-list-server(at)matronics.com] On Behalf Of Larry Cottrell
Sent: Wednesday, January 09, 2019 4:40 PM
To: kolb-list(at)matronics.com
Subject: Re: Re: Firefly / Firestar windshield


It looks pretty good, and I congratulate you on your design thinking. I had a version of that type of wind screen when I first got my plane. It might have been a bit shorter but the wind always hit me just about on my upper lip. If a fella was wearing a helmet it was no problem, but when I installed a radio I was too cheap to buy a helmet with sound, so I did without. You had to stick ear plugs in each nostril to keep the snot from running up my glasses. Smile A bit hard to clean.



Larry

On Wed, Jan 9, 2019 at 3:06 PM Richard Pike <thegreybaron(at)charter.net (thegreybaron(at)charter.net)> wrote:
Quote:

--> Kolb-List message posted by: "Richard Pike" <thegreybaron(at)charter.net (thegreybaron(at)charter.net)>

It's done! And now that it's done, I would like to thank the guys on this list for all their good ideas. I especially like John Hauck's windshield shape and size, and tried to get as close to it as possible but still use just one piece of Lexan.

I especially liked Gene Zimmerman's folding arrangement, because I too was having a terrible time getting in and out w/o bashing the windshield with my feet. OTOH, Gene's has a full frame and we are trying to keep the weight down and keep it Part 103 legal. With no frame, it was way too flexible.

So here is the result, pivots in the front, uses minimal hardware, just enough to keep it in shape. When you pull it down into flight position, a pin fits through the aft original windshield mounting tab on the fuselage frame, one on each side.

Once the pins are in place, the lever swings down to keep them from pulling back out. Locks everything in place.

Had to modify the fairing with big mounting pads to make the windshield pivot points parallel with the side of the fairing, otherwise the windshield bulged out with a big gap along the sides.

Now I just need the weather to warm up and calm down, and we can try out the new windshield and the new engine - we also swapped out the free air 277 for a fan cooled one. Assuming that everything works OK, then we modify the 277 to dual ignition.

--------
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kolb Firefly Part 103 legal (Redoing the Firefly windshield)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=486857#486857


Attachments:

http://forums.matronics.com//files/p1070061_medium_316.jpeg
http://forums.matronics.com//files/p1070067_medium_192.jpeg
http://forums.matronics.com//files/p1070080_medium_182.jpeg
http://forums.matronics.com//files/p1070077_medium_996.jpeg
http://forums.matronics.com//files/p1070076_medium_142.jpeg
http://forums.matronics.com//files/p1070078_medium_210.jpeg
http://forums.matronics.com//files/p1070079_medium_178.jpeg
http://forums.matronics.com//files/p1070075_medium_446.jpeg
http://forums.matronics.com//files/p1070070_medium_429.jpeg

===========
br> fts!)
r> > e.com" rel="noreferrer" target="_blank">www.mypilotstore.com
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
-Matt Dralle, List Admin.
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========



--
The older I get, the less tolerant I am of those who are intolerant of others.



If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



1399344_718035948224481_2024362433_o.jpg
 Description:
 Filesize:  105.72 KB
 Viewed:  9898 Time(s)

1399344_718035948224481_2024362433_o.jpg



1989_Oshkosh_Grand_Champion_UL_Kolb_FS.jpg
 Description:
 Filesize:  1.61 MB
 Viewed:  9898 Time(s)

1989_Oshkosh_Grand_Champion_UL_Kolb_FS.jpg



IMG_0971.jpg
 Description:
 Filesize:  54.23 KB
 Viewed:  9898 Time(s)

IMG_0971.jpg



_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group