Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

My Firestar 2 Build
Goto page Previous  1, 2, 3, 4  Next
 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
victorbravo(at)sbcglobal.
Guest





PostPosted: Mon Oct 29, 2018 3:48 pm    Post subject: My Firestar 2 Build Reply with quote

I believe Helen Melborn told me the number stamped on the rear edge of the motoe mount tube is the steel cage we;dment number, which is not sautomatically the same as the aircraft serial number???

Bill Berle
www.ezflaphandle.com  - safety & performance upgrade for light aircraft
www.grantstar.net           - winning proposals for non-profit and for-profit entities

--------------------------------------------
On Mon, 10/29/18, George Helton <gdhelton(at)gmail.com> wrote:

Subject: Re: Re: My Firestar 2 Build
To: kolb-list(at)matronics.com
Date: Monday, October 29, 2018, 4:21 PM


Helton <gdhelton(at)gmail.com>

If you can find original plans, it the
plans number. Like mine is FS100. The 100th original
Firestar.
George H.
Firestar, FS100, 2702 Hirth
14GDH
Mesick , Michigan
gdhelton(at)gmail.com


Sent from my iPhone

> On Oct 29, 2018, at 6:41 PM,
loctupdave <loctupdave(at)att.net>
wrote:
>
> --> Kolb-List message posted
by: "loctupdave" <loctupdave(at)att.net>
>
> Thank you for the replies. I
checked the motor mount tube, nothing there. I guess I will
make my own serial number.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=484080#484080
>
>
>
>
>
>
>
>
>

The Kolb-List Email Forum -
Navigator to browse
List Un/Subscription,
7-Day Browse, Chat, FAQ,
    - MATRONICS WEB FORUMS -
via the Web Forums!
    - NEW MATRONICS LIST WIKI -
Email List Wiki!
  - List Contribution Web Site -
support!
               
    -Matt Dralle, List Admin.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
mojavjoe



Joined: 23 Dec 2013
Posts: 64

PostPosted: Tue Oct 30, 2018 4:46 am    Post subject: My Firestar 2 Build Reply with quote

I agree with Bill. Mine was marked FS001 and I'm sure it was not the first Firestar.
Joe

Quote:
>
> Thank you for the replies. I
checked the motor mount tube, nothing there. I guess I will
make my own serial number.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=484080#484080
>
>
>
>
>
>
>
>
>

The Kolb-List Email Forum -
Navigator to browse
List Un/Subscription,
7-Day Browse, Chat, FAQ,
    - MATRONICS WEB FORUMS -
via the Web Forums!
    - NEW MATRONICS LIST WIKI -
Email List Wiki!
  - List Contribution Web Site -
support!
               
    -Matt Dralle, List Admin.










- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message Send e-mail
John Hauck



Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

PostPosted: Tue Oct 30, 2018 5:32 am    Post subject: My Firestar 2 Build Reply with quote

To the best of my knowledge the first Fire Star is in Homer Kolb's hanger in Springville, PA. I watched Dick Rahill crash it at Oshkosh in 1989. Homer completely rebuilt the first Firestar not long before he passed. Got to fly it at Sun and Fun 1986 or 87, then again at the Kolb Farm in 2008 (?). Was powered by a Rotax 377 originally, replaced with a 503 DC when rebuilt. Also had VGs.

john h
mkIII
Titus, Alabama


--


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama
Back to top
View user's profile Send private message Send e-mail
loctupdave



Joined: 01 Sep 2018
Posts: 25

PostPosted: Tue Oct 30, 2018 10:46 am    Post subject: Re: My Firestar 2 Build Reply with quote

The previous owner did not have much in the way
of information. The plans I do have I bought from Kolb. Like I said. it looks like I will have to make my own serial number.

gdhelton(at)gmail.com wrote:
If you can find original plans, it the plans number. Like mine is FS100. The 100th original Firestar.
George H.
Firestar, FS100, 2702 Hirth
14GDH
Mesick , Michigan
gdhelton(at)gmail.com
Sent from my iPhone

Quote:
On Oct 29, 2018, at 6:41 PM, loctupdave <loctupdave> wrote:



Thank you for the replies. I checked the motor mount tube, nothing there. I guess I will make my own serial number.




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=484080#484080












- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message AIM Address
ceengland7(at)gmail.com
Guest





PostPosted: Tue Oct 30, 2018 12:42 pm    Post subject: My Firestar 2 Build Reply with quote

Is this a previously registered a/c? If so, the serial number in the
eyes of the FAA is on the registration paperwork. There is no
requirement that it match Kolb's number (the person who registered it
could have called it a <buldername> Blowhard serial number 10,000), but
there *is* a requirement that your data plate matches the registration.

On 10/30/2018 1:46 PM, loctupdave wrote:
Quote:


The previous owner did not have much in the way
of information. The plans I do have I bought from Kolb. Like I said. it looks like I will have to make my own serial number.
gdhelton(at)gmail.com wrote:
> If you can find original plans, it the plans number. Like mine is FS100. The 100th original Firestar.
> George H.
> Firestar, FS100, 2702 Hirth
> 14GDH
> Mesick , Michigan
> gdhelton(at)gmail.com
> Sent from my iPhone
>> On Oct 29, 2018, at 6:41 PM, loctupdave wrote:
>>
>>
>>
>> Thank you for the replies. I checked the motor mount tube, nothing there. I guess I will make my own serial number.
>>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
gdhelton(at)gmail.com
Guest





PostPosted: Tue Oct 30, 2018 12:49 pm    Post subject: My Firestar 2 Build Reply with quote

Yup, sounds like you get to be creative.
George H.
Firestar
Mesick, Michigan

Sent from my iPhone

Quote:
On Oct 30, 2018, at 2:46 PM, loctupdave <loctupdave(at)att.net> wrote:



The previous owner did not have much in the way
of information. The plans I do have I bought from Kolb. Like I said. it looks like I will have to make my own serial number.


gdhelton(at)gmail.com wrote:
> If you can find original plans, it the plans number. Like mine is FS100. The 100th original Firestar.
> George H.
> Firestar, FS100, 2702 Hirth
> 14GDH
> Mesick , Michigan
> gdhelton(at)gmail.com
>
>
> Sent from my iPhone
>
>
>> On Oct 29, 2018, at 6:41 PM, loctupdave wrote:
>>
>>
>>
>> Thank you for the replies. I checked the motor mount tube, nothing there. I guess I will make my own serial number.
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=484080#484080
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>





Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=484096#484096











- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
loctupdave



Joined: 01 Sep 2018
Posts: 25

PostPosted: Tue Oct 30, 2018 1:10 pm    Post subject: Re: My Firestar 2 Build Reply with quote

With what I have for information this plane has never had a N number. There is no data plate or evidence of a N number removal.

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message AIM Address
ceengland7(at)gmail.com
Guest





PostPosted: Tue Oct 30, 2018 1:32 pm    Post subject: My Firestar 2 Build Reply with quote

On Tue, Oct 30, 2018 at 4:12 PM loctupdave <loctupdave(at)att.net (loctupdave(at)att.net)> wrote:

Quote:
--> Kolb-List message posted by: "loctupdave" <loctupdave(at)att.net (loctupdave(at)att.net)>

With what I have for information this plane has never had a N number. There is no data plate or evidence of a N number removal.

If it's never been registered, and you intend to register it as a homebuilt, then you get to pick the model name and serial number when you register it. Be prepared to show some kind of chain of ownership of the 'project', or a document signed by you stating that it was built from 'parts', meaning scratch built. You'll have to do the 51% checklist, etc.


If you intend to fly it as an ultralite, all the above is moot.
Charlie
Quote:



- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
loctupdave



Joined: 01 Sep 2018
Posts: 25

PostPosted: Tue Oct 30, 2018 1:56 pm    Post subject: Re: My Firestar 2 Build Reply with quote

It would be wonderful knowing the year it was made.

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message AIM Address
Jerry-TS-MkII



Joined: 23 Aug 2017
Posts: 79
Location: Indiana

PostPosted: Tue Oct 30, 2018 2:22 pm    Post subject: Re: My Firestar 2 Build Reply with quote

RE: SN..
Was this ever registered before? Or was it flown as a U/L? If it's ever been registered, the FAA should have a SN associated with the plane/paperwork. Smile
Jerry


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
loctupdave



Joined: 01 Sep 2018
Posts: 25

PostPosted: Tue Oct 30, 2018 2:55 pm    Post subject: Re: My Firestar 2 Build Reply with quote

I cannot see anything on the plane or information given that would suggest it has been restored by the FAA.

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message AIM Address
Jerry-TS-MkII



Joined: 23 Aug 2017
Posts: 79
Location: Indiana

PostPosted: Tue Oct 30, 2018 7:43 pm    Post subject: Re: My Firestar 2 Build Reply with quote

If you know the original builder.. Kolb might have records of who bought kits or plans? I'm not sure of when they changed ownership.. so that could be a problem, but might be worth a try. It may not be an issue, if it's never been registered. I know with a U/L transition to ELSA, it was "pick a number" and put it on the airplane and related documents.

Jerry


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
gdhelton(at)gmail.com
Guest





PostPosted: Tue Oct 30, 2018 7:55 pm    Post subject: My Firestar 2 Build Reply with quote

If you’re going to fly it as a ultralight, it’s a non-issue except I.D. purposes anyway.
George H.
Firestar
14GDH
Mesick, Michigan

Sent from my iPhone

Quote:
On Oct 30, 2018, at 11:43 PM, Jerry-TS-MkII <12flybellaire(at)gmail.com> wrote:



If you know the original builder.. Kolb might have records of who bought kits or plans? I'm not sure of when they changed ownership.. so that could be a problem, but might be worth a try. It may not be an issue, if it's never been registered. I know with a U/L transition to ELSA, it was "pick a number" and put it on the airplane and related documents.

Jerry




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=484110#484110











- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
johngilpin



Joined: 23 Mar 2011
Posts: 93
Location: 004

PostPosted: Wed Oct 31, 2018 1:24 am    Post subject: My Firestar 2 Build Reply with quote

That was the aircraft that I used for the travels that I did over in the USA in 2013,14,15. I flew it as an ultralight, and to my knowledge it never had been registered. The previous owner also flew it as an ultralight. He had no information as to it's history and no paperwork. I just took it 'as is' and hit the road and the air, and it served me well. 

The vertical stab had been modified in a very distinctive way, and the trailer is also very distinctive. These features can be seen in the blog http://jgflyingroadtrip2013.blogspot.com/  Someone may remember seeing these features in the past and might be able to bring up some history.... 
JG 


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message AIM Address
John Hauck



Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

PostPosted: Wed Oct 31, 2018 6:03 am    Post subject: My Firestar 2 Build Reply with quote

JG/Kolbers:

What an adventurer you are.  I know the difficulties of planning, building, and flying cross country flights in a Kolb.  No way I would ever attempt to do the trips that you have done.  Was sitting here reading your blog wondering what it would be like if I decided to go to Australia and do the same thing you have done several times here in the US.  The foreseeable and unforeseeable problems are monumental.

Glad we got to spend time together sharing travel stories on a couple of your trips.

john h
mkIII
Titus, Alabama

From: owner-kolb-list-server(at)matronics.com [mailto:owner-kolb-list-server(at)matronics.com] On Behalf Of JC Gilpin
Sent: Wednesday, October 31, 2018 3:18 AM
To: kolb-list(at)matronics.com
Subject: Re: My Firestar 2 Build


That was the aircraft that I used for the travels that I did over in the USA in 2013,14,15. I flew it as an ultralight, and to my knowledge it never had been registered. The previous owner also flew it as an ultralight. He had no information as to it's history and no paperwork. I just took it 'as is' and hit the road and the air, and it served me well.


The vertical stab had been modified in a very distinctive way, and the trailer is also very distinctive. These features can be seen in the blog http://jgflyingroadtrip2013.blogspot.com/ Someone may remember seeing these features in the past and might be able to bring up some history....



JG


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama
Back to top
View user's profile Send private message Send e-mail
west1m



Joined: 19 Apr 2014
Posts: 155
Location: Hastings, MN

PostPosted: Thu Nov 01, 2018 2:04 pm    Post subject: Re: My Firestar 2 Build Reply with quote

victorbravo(at)sbcglobal. wrote:
I believe Helen Melborn told me the number stamped on the rear edge of the motoe mount tube is the steel cage we;dment number, which is not sautomatically the same as the aircraft serial number???

Bill Berle
www.ezflaphandle.com  - safety & performance upgrade for light aircraft
www.grantstar.net           - winning proposals for non-profit and for-profit entities

--------------------------------------------
On Mon, 10/29/18, George Helton <gdhelton> wrote:

Subject: Re: Re: My Firestar 2 Build
To: kolb-list(at)matronics.com
Date: Monday, October 29, 2018, 4:21 PM


Helton <gdhelton>

If you can find original plans, it the
plans number. Like mine is FS100. The 100th original
Firestar.
George H.
Firestar, FS100, 2702 Hirth
14GDH
Mesick , Michigan
gdhelton(at)gmail.com


Sent from my iPhone

> On Oct 29, 2018, at 6:41 PM,
loctupdave <loctupdave>
wrote:
>
> --> Kolb-List message posted
by: "loctupdave" <loctupdave>
>
> Thank you for the replies. I
checked the motor mount tube, nothing there. I guess I will
make my own serial number.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=484080#484080
>
>
>
>
>
>
>
>
>

The Kolb-List Email Forum -
Navigator to browse
List Un/Subscription,
7-Day Browse, Chat, FAQ,
    - MATRONICS WEB FORUMS -
via the Web Forums!
    - NEW MATRONICS LIST WIKI -
Email List Wiki!
  - List Contribution Web Site -
support!
               
    -Matt Dralle, List Admin.

I wonder about your FS100 number, model Number? My old
firestar plans have that number on them as well


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



fS1032.jpg
 Description:
 Filesize:  229.32 KB
 Viewed:  16048 Time(s)

fS1032.jpg



fS100.jpg
 Description:
 Filesize:  256.18 KB
 Viewed:  16048 Time(s)

fS100.jpg



_________________
West1m
Hastings, MN
Back to top
View user's profile Send private message
loctupdave



Joined: 01 Sep 2018
Posts: 25

PostPosted: Sat Nov 10, 2018 8:01 am    Post subject: Re: My Firestar 2 Build Reply with quote

does anyone know what purpose this tab serves. I plan to cover this into a full canopy and it will be in the way. My thought is to cut it off.

distant pic



up close



- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message AIM Address
lcottrell



Joined: 29 May 2006
Posts: 1490
Location: Jordan Valley, Or

PostPosted: Sat Nov 10, 2018 9:17 am    Post subject: My Firestar 2 Build Reply with quote

I believe that it was intended for the enrichner lever.
Larry
On Sat, Nov 10, 2018 at 9:05 AM loctupdave <loctupdave(at)att.net (loctupdave(at)att.net)> wrote:

Quote:
--> Kolb-List message posted by: "loctupdave" <loctupdave(at)att.net (loctupdave(at)att.net)>

does anyone know what purpose this tab serves. I plan to cover this into a full canopy and it will be in the way. My thought is to cut it off.

distant pic

 (http://s275.photobucket.com/user/dngspot/media/tab_zpsstruv6nl.jpg.html)

up close

 (http://s275.photobucket.com/user/dngspot/media/tab%20close%20up_zpsslfb55xw.jpg.html)




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=484742#484742






===========
br> fts!)
r> > e.com" rel="noreferrer" target="_blank">www.mypilotstore.com
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
          -Matt Dralle, List Admin.
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========




--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
rascaljohn



Joined: 02 May 2013
Posts: 23

PostPosted: Sat Nov 10, 2018 9:17 am    Post subject: My Firestar 2 Build Reply with quote

I think this was meant for a remote choke lever.
After painting and covering my fs ll fuselage cage I then began adding all the interior items... and then wished that I had planned ahead. Small tabs could have been added for mounting floor panels, windscreen and windows, etc. I used a throttle quadrant that really would have been a simpler install if only there was a mounting tab...
Is yours a fs l or ll ? The fs ll has a 1/2” horizontal tube that runs just in front of where the 5”tail boom spar attaches; the fabric seat swoops under this. I was contacted by Kolb Co. several years ago advising that the tube welds were cracking and a sliding splice would allow movement but still support the fabric. I saw a need for 4 additional pulleys to raise the rudder/elevator cables as they entered the tail boom. This sliding splice was part of my new pulley housing...much easier before paint and fabric. Also, the center wing gap seal would be a good place to look at.
Check with Kolb regarding the horizontal tube modification.
John Fitt

Sent from my iPhone

Quote:
On Nov 10, 2018, at 8:01 AM, loctupdave <loctupdave(at)att.net> wrote:



does anyone know what purpose this tab serves. I plan to cover this into a full canopy and it will be in the way. My thought is to cut it off.

distant pic

(http://s275.photobucket.com/user/dngspot/media/tab_zpsstruv6nl.jpg.html)

up close

(http://s275.photobucket.com/user/dngspot/media/tab%20close%20up_zpsslfb55xw.jpg.html)




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=484742#484742











- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
loctupdave



Joined: 01 Sep 2018
Posts: 25

PostPosted: Sat Nov 10, 2018 11:44 am    Post subject: Re: My Firestar 2 Build Reply with quote

Thanks John.
My Firestar is a fs2. As for the choke, my engine has them, but they will not be used, as there is a priming system. I have a Quick Silver that has this system, when I built the engine and carb, I removed the choke and used gasket maker to plug the hole. With the priming system give it a couple squirts and she starts up in a couple of pulls. As for the floor the front is done. Im not sure if I will floor the back.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message AIM Address
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Goto page Previous  1, 2, 3, 4  Next
Page 2 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group