Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Aileron closeout reinforcement question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
n7188u



Joined: 15 Nov 2015
Posts: 395

PostPosted: Wed Nov 28, 2018 10:25 am    Post subject: Aileron closeout reinforcement question Reply with quote

Dear Europa forum members,

I am getting ready to reinforce the aileron closeouts on the wings (chapter Cool. Figure 8 of this chapters says to apply the reinforcement full length but not to flox the aileron balance areas. The question is: is the BID reinforcement applied also over the balance areas or not? The indication not to use flox would point to not reinforcing the balance areas and the reference to full length is just indicating the reinforcement is along the entire closeout (but not on the balance areas).

is my understanding correct?

Thanks,
Chris


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
wdaniell.longport(at)gmai
Guest





PostPosted: Wed Nov 28, 2018 12:38 pm    Post subject: Aileron closeout reinforcement question Reply with quote

Chris,
For what its worth i reinforced the whole closeout including joint between the aileron balance boxes and the lower surface of the wing.  I used flox on all the sharp corners.  Dont go over the upper side of the aileron balance boxes otherwise you'll have difficulty with putting the top skin on

will
William Daniell

XS 912 turbo airmaster Dynon Skyview with 100 Flight

+57 310 295 0744

On Wed, Nov 28, 2018 at 1:28 PM n7188u <chmgarb(at)gmail.com (chmgarb(at)gmail.com)> wrote:

Quote:
--> Europa-List message posted by: "n7188u" <chmgarb(at)gmail.com (chmgarb(at)gmail.com)>

Dear Europa forum members,

I am getting ready to reinforce the aileron closeouts on the wings (chapter Cool. Figure 8 of this chapters says to apply the reinforcement full length but not to flox the aileron balance areas. The question is: is the BID reinforcement applied also over the balance areas or not? The indication not to use flox would point to not reinforcing the balance areas and the reference to full length is just indicating the reinforcement is along the entire closeout (but not on the balance areas).

is my understanding correct?

Thanks,
Chris




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=485845#485845






===========
br> fts!)
r> > e.com" rel="noreferrer" target="_blank">www.mypilotstore.com
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
          -Matt Dralle, List Admin.
===========
pa-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========





- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
n7188u



Joined: 15 Nov 2015
Posts: 395

PostPosted: Wed Nov 28, 2018 1:17 pm    Post subject: Re: Aileron closeout reinforcement question Reply with quote

Thanks for the info Will. I guess the only disadvantage of placing the reinforcement over the thin skin where the balance boxes go is them getting pushed up and interfering with the upper skin (as you mentioned). Let's see what other people say.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group