Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Grounding

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
flyer532(at)gmail.com
Guest





PostPosted: Mon Mar 01, 2021 9:57 am    Post subject: Grounding Reply with quote

Hey guys/gals, I am installing 9 different Mitchell Aircraft cluster style gauges. I am using molex connectors. 8 of the gauges have a black grounding wire ( the ninth one is an ammeter with a shunt) and am wondering about the effectiveness of different grounding methods.  Was thinking of running the ground wires into a molex connector, then jumping the grounds to a single ground wire out the back of the molex connector then attaching that wire to the metal aircraft frame. Is that a sufficient ground or does each grounding wire need to be run to a grounding bus bar? 

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
DougW



Joined: 16 Sep 2015
Posts: 14
Location: Washington

PostPosted: Mon Mar 01, 2021 12:38 pm    Post subject: Grounding Reply with quote

I would think you proposal would work electrically but I doubt that I would ever buy a plane wired as you propose.

Why?  Maintenance.  If one of your gauges stops working, how will you determine if the cause is electrical due to the power or ground wires, or something else.  I also do not find the use of the airframe at a ground point appealing as there could be a lot of unknowns involved; would prefer a central ground point with only one electrical connection of the airframe to that ground point.  By using a common ground point, you greatly reduce the possibility of ground loops.

Just some food for thought.

Doug

From: owner-aeroelectric-list-server(at)matronics.com <owner-aeroelectric-list-server(at)matronics.com> On Behalf Of Daryl Thompson
Sent: Monday, March 1, 2021 9:56 AM
To: aeroelectric-list(at)matronics.com
Subject: Grounding


Hey guys/gals, I am installing 9 different Mitchell Aircraft cluster style gauges. I am using molex connectors. 8 of the gauges have a black grounding wire ( the ninth one is an ammeter with a shunt) and am wondering about the effectiveness of different grounding methods. Was thinking of running the ground wires into a molex connector, then jumping the grounds to a single ground wire out the back of the molex connector then attaching that wire to the metal aircraft frame. Is that a sufficient ground or does each grounding wire need to be run to a grounding bus bar?


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
dfcats7(at)yahoo.com
Guest





PostPosted: Mon Mar 01, 2021 1:21 pm    Post subject: Grounding Reply with quote

Please change my email to the following:
friedmand54(at)yahoo.com

Thank you.

On Monday, March 1, 2021, 03:53:49 PM EST, n1dw <n1deltawhiskey(at)comcast.net> wrote:




#yiv9546534483 #yiv9546534483 -- _filtered {} _filtered {} #yiv9546534483 #yiv9546534483 p.yiv9546534483MsoNormal, #yiv9546534483 li.yiv9546534483MsoNormal, #yiv9546534483 div.yiv9546534483MsoNormal {margin:0in;font-size:11.0pt;font-family:sans-serif;} #yiv9546534483 span.yiv9546534483EmailStyle18 {font-family:sans-serif;color:windowtext;} #yiv9546534483 .yiv9546534483MsoChpDefault {font-family:sans-serif;} _filtered {} #yiv9546534483 div.yiv9546534483WordSection1 {} #yiv9546534483
I would think you proposal would work electrically but I doubt that I would ever buy a plane wired as you propose.

Why? Maintenance. If one of your gauges stops working, how will you determine if the cause is electrical due to the power or ground wires, or something else. I also do not find the use of the airframe at a ground point appealing as there could be a lot of unknowns involved; would prefer a central ground point with only one electrical connection of the airframe to that ground point. By using a common ground point, you greatly reduce the possibility of ground loops.

Just some food for thought.

Doug

From: owner-aeroelectric-list-server(at)matronics.com <owner-aeroelectric-list-server(at)matronics.com> On Behalf Of Daryl ThompsonSent: Monday, March 1, 2021 9:56 AMTo: aeroelectric-list(at)matronics.comSubject: Grounding


Hey guys/gals, I am installing 9 different Mitchell Aircraft cluster style gauges. I am using molex connectors. 8 of the gauges have a black grounding wire ( the ninth one is an ammeter with a shunt) and am wondering about the effectiveness of different grounding methods.  Was thinking of running the ground wires into a molex connector, then jumping the grounds to a single ground wire out the back of the molex connector then attaching that wire to the metal aircraft frame. Is that a sufficient ground or does each grounding wire need to be run to a grounding bus bar?


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group