Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Jabiru SERVICE BULLETIN: JSB 013-1

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> JabiruEngine-List
View previous topic :: View next topic  
Author Message
cffd(at)pgrb.com
Guest
PostPosted: Wed Sep 27, 2006 2:04 pm    Post subject: Jabiru SERVICE BULLETIN: JSB 013-1 Reply with quote
How are we 2200A folks, without hydraulic lifters (Serial # below 2068) and not needing to drill a hole in the rocker cavities, supposed to interpret SERVICE BULLETIN: JSB 013-1?

Which says
4.3 Operations After Modified:
a) Continue to fill the oil sump no higher than the lower mark of the dipstick.
b) Oil consumption when filled below the lower mark should be monitored and known to be acceptable before carrying out flights of over 3.5 hours duration.

Do we just fill to the lower mark too,
and how far below the lower mark is OK?

Chuck D.
N701TX

[quote][b]

- The Matronics JabiruEngine-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?JabiruEngine-List
Back to top
info(at)usjabiru.com
Guest
PostPosted: Wed Sep 27, 2006 2:16 pm    Post subject: Jabiru SERVICE BULLETIN: JSB 013-1 Reply with quote
Chuck,

If you serial number does not fall within the specified range then you should ignore the entire bulletin as it does not apply to your engine.

Pete Krotje
Jabiru USA Sport Aircraft, LLC


From: owner-jabiruengine-list-server(at)matronics.com [mailto:owner-jabiruengine-list-server(at)matronics.com] On Behalf Of Chuck Deiterich
Sent: Wednesday, September 27, 2006 5:03 PM
To: jabiruengine-list(at)matronics.com
Subject: Jabiru SERVICE BULLETIN: JSB 013-1


How are we 2200A folks, without hydraulic lifters (Serial # below 2068) and not needing to drill a hole in the rocker cavities, supposed to interpret SERVICE BULLETIN: JSB 013-1?


Which says

4.3 Operations After Modified:
a) Continue to fill the oil sump no higher than the lower mark of the dipstick.
b) Oil consumption when filled below the lower mark should be monitored and known to be acceptable before carrying out flights of over 3.5 hours duration.



Do we just fill to the lower mark too,
and how far below the lower mark is OK?



Chuck D.

N701TX

Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
0
Quote:
1
Quote:
2
Quote:
3
[quote][b]

- The Matronics JabiruEngine-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?JabiruEngine-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> JabiruEngine-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group