Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Engineer question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV8-List
View previous topic :: View next topic  
Author Message
gengrumpy



Joined: 07 May 2013
Posts: 131
Location: Tullahoma, TN

PostPosted: Fri Jun 19, 2015 5:05 pm    Post subject: Engineer question Reply with quote

See the picture below. I sent the below to Ken today at Vans. His answer was no answer possible as they have no data on it.
So, for any of you structural engineer types out there, can you offer an opinion on whether oversizing these holes creates a structural issue? They are now 10/32 holes in the longeron vice the plans 6/32 holes.

Thanks - grumpy
gengrumpy(at)aol.com (gengrumpy(at)aol.com)
Quote:
[img]cid:243AAAED-CEFA-4CE5-B64A-C2089C9DDA79[/img]Ken, i was going to use 8/32 vice 6/32 for the fairings under the horizontal. Mis-drilled and now 10-32 tapped. Do you see a structural issue for me here?Thanks - JohnJohn Miller - Sent from my iPhone


- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List



FullSizeRender.jpeg
 Description:
 Filesize:  26.5 KB
 Viewed:  2717 Time(s)

FullSizeRender.jpeg


Back to top
View user's profile Send private message Send e-mail
carl.froehlich(at)verizon
Guest





PostPosted: Fri Jun 19, 2015 5:43 pm    Post subject: Engineer question Reply with quote

The whole "thread the hole in the longeron" idea never appealed to me. I don't think threads in aluminum would last too long. I drilled these holes using #28 bit and then mounted #6 nut-plates behind them.
As you are now over drilled I suspect you have weaken the longeron somewhat, but I'd guess marginally. If you have reservations then you can add a .063" backing plate on the inside of the longeron angle along the rivet line the length of the screw holes. Consider adding nut-plates if you do.
Carl


On Jun 19, 2015, at 9:02 PM, Miller John <gengrumpy(at)aol.com (gengrumpy(at)aol.com)> wrote:
Quote:
See the picture below. I sent the below to Ken today at Vans. His answer was no answer possible as they have no data on it.
So, for any of you structural engineer types out there, can you offer an opinion on whether oversizing these holes creates a structural issue? They are now 10/32 holes in the longeron vice the plans 6/32 hole
Thanks - grumpy
gengrumpy(at)aol.com (gengrumpy(at)aol.com)
Quote:
<FullSizeRender.jpeg>Ken, i was going to use 8/32 vice 6/32 for the fairings under the horizontal. Mis-drilled and now 10-32 tapped. Do you see a structural issue for me here?Thanks - JohnJohn Miller - Sent from my iPhone


[quote][b]


- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV8-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group