nuckolls.bob(at)aeroelect Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Jan 10, 2016 3:57 pm    Post subject: Returned Mail: Re: Grounding Tabs | 
				     | 
			 
			
				
  | 
			 
			
				At 04:35 PM 1/10/2016, you wrote:
   	  | Quote: | 	 		  | I have read Bob's reply.  It raises another question.  If I were to use B&C forest of tabs to ground everything.  Flap motor , P. Heat,  strobes, interior lights and all the panel stuff like coms, audio panel etc.  would that cause a ground loop.  | 	  
    No . . . the "ideal" single point ground philosophy
    says take EVERYTHING to one place . . . except for
    the simplest of small airplanes, this is impractical.
 
    As shown in the Z-15 figures, collect all panel grounds
    (potential victims) to one place, all airframe grounds
    to firewall as practical . . . or ground locally as
    convenience dictates. 
 
    For plastic airplanes, then -A- you DO gather airframe grounds to
    the firewall and -B- take an extension wire from
    the panel ground down to the firewall.
 
  
    Bob . . .
 
  |  | - The Matronics AeroElectric-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?AeroElectric-List |  
  |  
 
 
 
 
  | 
			 
		  |