  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		kenryan
 
 
  Joined: 20 Oct 2009 Posts: 429
 
  | 
		
			
				 Posted: Sun Mar 20, 2016 2:15 pm    Post subject: info on this terminal | 
				     | 
			 
			
				
  | 
			 
			
				Are the terminals on this switch solder only or is there a push on connector that matches?[img]cid:ii_1539616375b04dcb[/img]
 
  |  | - The Matronics AeroElectric-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?AeroElectric-List |  
  |  
 
 
 
  
	
  
	 
	
	
		
	 
	
		|  Description: | 
		
			
		 | 
	 
	
		|  Filesize: | 
		 57.64 KB | 
	 
	
		|  Viewed: | 
		 2722 Time(s) | 
	 
	
		
  
 
  | 
	 
	 
	 
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Bob McC
 
 
  Joined: 09 Jan 2006 Posts: 258 Location: Toronto, ON
  | 
		
			
				 Posted: Sun Mar 20, 2016 3:01 pm    Post subject: info on this terminal | 
				     | 
			 
			
				
  | 
			 
			
				Solder !  
    
 You may find a narrow female tab which “sort of” fits but it is not an intended application and is not recommended.  
    
 Bob McC  
            
   
 From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Ken Ryan
  Sent: Sunday, March 20, 2016 6:13 PM
  To: aeroelectric-list(at)matronics.com
  Subject: info on this terminal  
   
      
 Are the terminals on this switch solder only or is there a push on connector that matches?[img]cid:image002.jpg(at)01D182DA.A86ECC50[/img]
 
  |  | - The Matronics AeroElectric-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?AeroElectric-List |  
  |  
 
 
 
  
	
  
	 
	
	
		
	 
	
		|  Description: | 
		
			
		 | 
	 
	
		|  Filesize: | 
		 8.59 KB | 
	 
	
		|  Viewed: | 
		 2720 Time(s) | 
	 
	
		
  
 
  | 
	 
	 
	 
 _________________ Bob McC
 
Falco #908
 
(just starting) | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		chaskuss(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Mar 20, 2016 3:06 pm    Post subject: info on this terminal | 
				     | 
			 
			
				
  | 
			 
			
				Soldering a wire onto this sensor would risk ruining the sensor. I believe the intended connection method is to use a matching ring terminal on the wire. Fasten the wire to the terminal using the appropriate screw, 2 flat washers and a Nyloc nut. Certainly not my favorite type of terminal on a sensor exposed to engine vibration. A sensor like this would best be used on a transducer manifold block, mounted to the firewall. Vans aircraft sells such a manifold block. It's listed on the bottom of page 30 of their catalog. You can download the catalog here.
 
 http://www.vansaircraft.com/public/download/2015-2016_Catalog.pdf
 
 Charlie
 --------------------------------------------
 On Sun, 3/20/16, Ken Ryan <keninalaska(at)gmail.com> wrote:
 
  Subject: info on this terminal
  To: "aeroelectric-list(at)matronics.com" <aeroelectric-list(at)matronics.com>
  Date: Sunday, March 20, 2016, 6:12 PM
  
  Are the terminals on
  this switch solder only or is there a push on connector that
  matches?
 
  |  | - The Matronics AeroElectric-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?AeroElectric-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		kenryan
 
 
  Joined: 20 Oct 2009 Posts: 429
 
  | 
		
			
				 Posted: Sun Mar 20, 2016 5:00 pm    Post subject: info on this terminal | 
				     | 
			 
			
				
  | 
			 
			
				Thank you Bob and Lyle.
 
 On Sun, Mar 20, 2016 at 3:35 PM, Lyle Peterson <lyleap(at)centurylink.net (lyleap(at)centurylink.net)> wrote:
  	  | Quote: | 	 		                     I think it is intended for soldering.  I don't see how you would get     a slip on terminal to stay on/
      
      You may be able to put an alligator clip or similar as a heat sink     on the terminal below the solder area.  It should only take a very     few seconds to get a good solder joint.  
      
      On 3/20/2016 5:12 PM, Ken Ryan wrote:
      
       	  | Quote: | 	 		         Are the terminals on this switch solder only or is         there a push on connector that matches?
  | 	       
  | 	 
 
 
  |  | - The Matronics AeroElectric-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?AeroElectric-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |