Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Ordering Specs for Rebuilt Mags (not electronic ignition)

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Mauledriver(at)nc.rr.com
Guest





PostPosted: Fri Feb 03, 2017 2:19 pm    Post subject: Ordering Specs for Rebuilt Mags (not electronic ignition) Reply with quote

I want to stay with Slicks because that's what the engine came with and I have a few tools and a little experience working with them.

I want to replace them with 'rebuilt' Slick mags and not 'overhauled' Slick mags.  And I intend to get a 'core credit' for exchanging my old ones.

Bill 'not quite overwhelmed yet by all the ignition options yet' Watson

On 2/3/2017 3:38 PM, Kelly McMullen wrote:

Quote:
Most of the usual suppliers of aircraft parts will stock overhauled mags. However, if you choose to stay with Slick, as opposed to Bendix, I would strongly consider the price delta for new Slick. Looks like extra $250-300 for a new mag over rebuilt. The irony is that overhauled Bendix mags look to be less money than overhauled Slick.

-sent from the I-droid implanted in my forearm







On Fri, Feb 3, 2017 at 11:14 AM, Bill Watson <Mauledriver(at)nc.rr.com (Mauledriver(at)nc.rr.com)> wrote:
Quote:
--> RV10-List message posted by: Bill Watson <Mauledriver(at)nc.rr.com (Mauledriver(at)nc.rr.com)>

I have a bit over 800 hours and 5.5 years on my Slicks and am ready to replace with a 'new' set of rebuilt units.  They are operating just fine but I'm thinking it's a good thing to do at this point.

I have a stock Lycoming/Vans IO-540-D4A5

Can anyone share the ordering information for replacements?  Best sources?

I was looking a ACS and elsewhere and it seems there are multiple part numbers used in multiple places.  Just trying to cut through the paper storm without getting smart first.

BTW, I did get versed in teardown and maintenance when I did the excessive point wear SB at 100 hours.  I'm choosing to replace.

Thanks


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================









This email has been checked for viruses by Avast antivirus software.
www.avast.com


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
fgcobble(at)roadrunner.co
Guest





PostPosted: Sun Feb 05, 2017 7:30 am    Post subject: Ordering Specs for Rebuilt Mags (not electronic ignition) Reply with quote

I bought a new Lycoming with mags – never used -  looking to sell – if interested will send info and photos

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Bill Watson
Sent: Friday, February 03, 2017 2:19 PM
To: rv10-list(at)matronics.com
Subject: Re: Ordering Specs for Rebuilt Mags (not electronic ignition)

I want to stay with Slicks because that's what the engine came with and I have a few tools and a little experience working with them.

I want to replace them with 'rebuilt' Slick mags and not 'overhauled' Slick mags. And I intend to get a 'core credit' for exchanging my old ones.

Bill 'not quite overwhelmed yet by all the ignition options yet' Watson

On 2/3/2017 3:38 PM, Kelly McMullen wrote:
Quote:

Most of the usual suppliers of aircraft parts will stock overhauled mags. However, if you choose to stay with Slick, as opposed to Bendix, I would strongly consider the price delta for new Slick. Looks like extra $250-300 for a new mag over rebuilt. The irony is that overhauled Bendix mags look to be less money than overhauled Slick.
-sent from the I-droid implanted in my forearm


On Fri, Feb 3, 2017 at 11:14 AM, Bill Watson <Mauledriver(at)nc.rr.com (Mauledriver(at)nc.rr.com)> wrote:
--> RV10-List message posted by: Bill Watson <Mauledriver(at)nc.rr.com (Mauledriver(at)nc.rr.com)>

I have a bit over 800 hours and 5.5 years on my Slicks and am ready to replace with a 'new' set of rebuilt units. They are operating just fine but I'm thinking it's a good thing to do at this point.

I have a stock Lycoming/Vans IO-540-D4A5

Can anyone share the ordering information for replacements? Best sources?

I was looking a ACS and elsewhere and it seems there are multiple part numbers used in multiple places. Just trying to cut through the paper storm without getting smart first.

BTW, I did get versed in teardown and maintenance when I did the excessive point wear SB at 100 hours. I'm choosing to replace.

Thanks
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================








This email has been checked for viruses by Avast antivirus software.
www.avast.com


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Mauledriver(at)nc.rr.com
Guest





PostPosted: Sun Feb 05, 2017 8:59 am    Post subject: Ordering Specs for Rebuilt Mags (not electronic ignition) Reply with quote

I'm very interested.  Please send vitals to BillinDurham on the gmail domain.

Thanks

On 2/5/2017 10:28 AM, gulf wrote:

Quote:
v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} <![endif]--> <![endif]--> <![endif]-->
I bought a new Lycoming with mags – never used -  looking to sell – if interested will send info and photos
 
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Bill Watson
Sent: Friday, February 03, 2017 2:19 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Ordering Specs for Rebuilt Mags (not electronic ignition)


 
I want to stay with Slicks because that's what the engine came with and I have a few tools and a little experience working with them.

I want to replace them with 'rebuilt' Slick mags and not 'overhauled' Slick mags.  And I intend to get a 'core credit' for exchanging my old ones.

Bill 'not quite overwhelmed yet by all the ignition options yet' Watson

On 2/3/2017 3:38 PM, Kelly McMullen wrote:
Quote:

Most of the usual suppliers of aircraft parts will stock overhauled mags. However, if you choose to stay with Slick, as opposed to Bendix, I would strongly consider the price delta for new Slick. Looks like extra $250-300 for a new mag over rebuilt. The irony is that overhauled Bendix mags look to be less money than overhauled Slick.


-sent from the I-droid implanted in my forearm







 
On Fri, Feb 3, 2017 at 11:14 AM, Bill Watson <Mauledriver(at)nc.rr.com (Mauledriver(at)nc.rr.com)> wrote:
--> RV10-List message posted by: Bill Watson <Mauledriver(at)nc.rr.com (Mauledriver(at)nc.rr.com)>

I have a bit over 800 hours and 5.5 years on my Slicks and am ready to replace with a 'new' set of rebuilt units.  They are operating just fine but I'm thinking it's a good thing to do at this point.

I have a stock Lycoming/Vans IO-540-D4A5

Can anyone share the ordering information for replacements?  Best sources?

I was looking a ACS and elsewhere and it seems there are multiple part numbers used in multiple places.  Just trying to cut through the paper storm without getting smart first.

BTW, I did get versed in teardown and maintenance when I did the excessive point wear SB at 100 hours.  I'm choosing to replace.

Thanks


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================




 

 
 


This email has been checked for viruses by Avast antivirus software.
www.avast.com
 



This email has been checked for viruses by Avast antivirus software.
www.avast.com


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group