Matronics Email Lists :: View topic - Does Anyone Recognize This AMP 12 Pin Connector?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Does Anyone Recognize This AMP 12 Pin Connector?

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

billhuntersemail(at)gmail
Guest

Posted: Wed Jun 21, 2017 9:02 am Post subject: Does Anyone Recognize This AMP 12 Pin Connector?

Hi All,

 

I need to rearrange the wires on this AMP 12 pin connector and my hope is to simply pop out the terminal ends and leave the wires still connected and just move them to the proper pin locations and pop them back in (I might have to re-bend the metal retainer tabs).

 

The questions are:

 

Does anyone know what terminal connector this is?

 

How does one (me) unseat the terminal ends from the connector and what tool should be used?

 

..

 

THANKS!!!

 

Bill  Hunter

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

AMP.jpg

Description:

Filesize:

451.48 KB

Viewed:

2640 Time(s)

billhuntersemail(at)gmail
Guest

Posted: Wed Jun 21, 2017 10:27 am Post subject: Does Anyone Recognize This AMP 12 Pin Connector?

Thanks for the information... I knew I could count on you. I will report back  

Thanks,  

Bill Hunter  On Jun 21, 2017 11:21 AM, "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote: 	  Quote: 	
		    

   It would really help to see the other

   side of the connector.



   I 'think' this is the tool you'll need



   



   or one very similar. exact p/n to be

   determined.



 



 

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

rv8iator(at)gmail.com
Guest

Posted: Thu Jun 22, 2017 4:46 am Post subject: Does Anyone Recognize This AMP 12 Pin Connector?

The photo is of an AMP Mate'n'lock connector.  There are three or four sizes of Mate'n'lock connectors based on pin size (diameter).

The contact removal tool is a sleeve and plunger tool.  The sleeve compresses the retainer tangs into flush with the contact body and the plunger pushes them out of the housing.



On Wed, Jun 21, 2017 at 10:02 AM, William Hunter <billhuntersemail(at)gmail.com (billhuntersemail(at)gmail.com)> wrote:

 	  Quote: 	
		  

Hi All,

 

I need to rearrange the wires on this AMP 12 pin connector and my hope is to simply pop out the terminal ends and leave the wires still connected and just move them to the proper pin locations and pop them back in (I might have to re-bend the metal retainer tabs).

 

The questions are:

 

Does anyone know what terminal connector this is?

 

How does one (me) unseat the terminal ends from the connector and what tool should be used?

 

..

 

THANKS!!!

 

Bill  Hunter

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

billhuntersemail(at)gmail
Guest

Posted: Thu Jun 22, 2017 5:52 am Post subject: Does Anyone Recognize This AMP 12 Pin Connector?

That is exactly it. THANK YOU SO MUCH for the help. 

 

Bill Hunter  On Jun 22, 2017 5:51 AM, "Christopher Cee Stone" <rv8iator(at)gmail.com (rv8iator(at)gmail.com)> wrote: 	  Quote: 	
		  The photo is of an AMP Mate'n'lock connector.  There are three or four sizes of Mate'n'lock connectors based on pin size (diameter).

The contact removal tool is a sleeve and plunger tool.  The sleeve compresses the retainer tangs into flush with the contact body and the plunger pushes them out of the housing.



On Wed, Jun 21, 2017 at 10:02 AM, William Hunter <billhuntersemail(at)gmail.com (billhuntersemail(at)gmail.com)> wrote:

 	  Quote: 	
		  

Hi All,

 

I need to rearrange the wires on this AMP 12 pin connector and my hope is to simply pop out the terminal ends and leave the wires still connected and just move them to the proper pin locations and pop them back in (I might have to re-bend the metal retainer tabs).

 

The questions are:

 

Does anyone know what terminal connector this is?

 

How does one (me) unseat the terminal ends from the connector and what tool should be used?

 

..

 

THANKS!!!

 

Bill  Hunter

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum