Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

RV10-List Digest: 6 Msgs - 11/13/17

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
dlm34077(at)gmail.com
Guest





PostPosted: Tue Nov 14, 2017 4:52 am    Post subject: RV10-List Digest: 6 Msgs - 11/13/17 Reply with quote

Try Grainger if the HID situation involves a bulb only. I had a bulb go bad but ballast worked fine; a GE HID bulb with the old ballast works with the old holder. The LED stuff I found required a complete rework of the LL fixture and tip area.
N46007
On Tue, Nov 14, 2017 at 1:05 AM, RV10-List Digest Server <rv10-list(at)matronics.com (rv10-list(at)matronics.com)> wrote:
Quote:
*

 ==================================================
   Online Versions of Today's List Digest Archive
 ==================================================

Today's complete RV10-List Digest can also be found in either of the
two Web Links listed below.  The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation.  The .txt file includes the plain ASCII version
of the RV10-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

    http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2017-11-13&Archive=RV10

Text Version:

    http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2017-11-13&Archive=RV10


 ================================================
   EMail Version of Today's List Digest Archive
 ================================================


           ----------------------------------------------------------
                           RV10-List Digest Archive
                                      ---
                     Total Messages Posted Mon 11/13/17: 6
           ----------------------------------------------------------


Today's Message Index:
----------------------

     0. 08:17 AM - [PLEASE READ] Why I Have A Fund Raiser...   (Matt Dralle)
     1. 06:27 AM - Re: CofG Question (Sort of)  (Gary Specketer)
     2. 08:29 AM - Re: CofG Question (Sort of)  (kearney)
     3. 10:47 AM - Re: Re: CofG Question (Sort of)  (Albert)
     4. 11:07 AM - Re: Re: CofG Question (Sort of)  (Tim Olson)
     5. 12:26 PM - Re: Re: CofG Question (Sort of)  (Kelly McMullen)



________________________________  Message 0  _____________________________________


Time: 08:17:53 AM PST US
From: Matt Dralle <dralle(at)matronics.com (dralle(at)matronics.com)>
Subject: [PLEASE READ] Why I Have A Fund Raiser...


Since the beginning, the Matronics List and Forum experience has been free from
advertising.  I have been approached by fair number of vendors wanting to tap
into the large volume of activity across the various lists hosted here, but have
always flatly refused.  Everywhere you go on the Internet these days, a user
is pummeled with flashing banners and videos and ads for crap that they don't
want.  Yahoo, Google and that ilk are not "free".  The user must constantly
endure their barrage of commercialism thrust into their face at an ever increasing
rate.  Enough is enough, and the Lists at Matronics choose not to succumb
to that.

That being said, running a service of this size is not "free".  It costs a lot
of money to maintain the hardware, pay for the electricity, air conditioning,
maintenance contracts, etc, etc. etc.  I choose to hold a PBS-like fund raiser
each year during the month of November where I simply send out a short email
every other day asking the members to make a small contribution to support the
operation.  That being said, that contribution is completely voluntary and non-compulsory.
Many members choose not to contribute and that's fine.

However, a very modest percentage of the members do choose to make a contribution
and it is that financial support that keeps the Lists running.  And that's
it.  To my way of thinking, it is a much more pleasant way of maintaining the
Lists and Forums.  The other 11 months of the year, you don't see a single advertisement
or request for support.  That's refreshing and that is a List and Forum
that I want to belong to.  I think other people feel the same way.

Won't you please take a minute to make your Contribution today and support these
Lists?

        http://www.matronics.com/contribution

Or, drop a personal check in the mail to:

        Matt Dralle / Matronics
        581 Jeannie Way
        Livermore CA 94550
        USA

Thank you for your support!

Matt Dralle
Email List Admin.


________________________________  Message 1  _____________________________________


Time: 06:27:02 AM PST US
Subject: Re: CofG Question (Sort of)
From: Gary Specketer <gspecketer(at)gmail.com (gspecketer(at)gmail.com)>


It is tail heavy about 15 lbs

GARY Specketer

> On Nov 12, 2017, at 7:27 PM, kearney <kearney(at)shaw.ca (kearney(at)shaw.ca)> wrote:
>
>
> Hi
>
> I have my -10 project on a dolly and am planning to get it up on its wheels in
the next couple of weeks.
>
> I have the tail cone (but not the feathers) attached and am wondering how tippy
it will be if there is no engine attached.
>
> Any comments? If I need to add ballast to the nose till I get an engine, is there
any preferred way to do this?
>
> Cheers
>
> Les
>
> C-GROK (now officially in fiberglass hell)
> C-GCWZ flying
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=474863#474863
>
>
>
>
>
>
>
>
>


________________________________  Message 2  _____________________________________


Time: 08:29:45 AM PST US
Subject: Re: CofG Question (Sort of)
From: "kearney" <kearney(at)shaw.ca (kearney(at)shaw.ca)>


Guys

Thanks for the info. I'll likely install bump bar in tail but use the water in
pail trick as well.

Cheers

Les


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=474945#474945


________________________________  Message 3  _____________________________________


Time: 10:47:35 AM PST US
From: "Albert" <ibspud(at)roadrunner.com (ibspud(at)roadrunner.com)>
Subject: RE: Re: CofG Question (Sort of)


Well, if it isn't one thing it's another. Last week my Garmin 496 GPS died,
this week it's my HID landing lights. So I'm going to replace them with
LEDs. Vans sells a Sunspot LED wing tip kit for the RV10/14 kits. From the
picture I can't tell if they are a exact replacement for the original RV-10
wing tip landing light or not. Vans picture doesn't show the position lights
that the original installation has in the wing tip. Maybe there is a better
LED light available. Wouldn't mind installing them inboard from the tips for
better center line coverage. I've considered an additional light under the
prop for center line coverage. Tried mounting one on the front wheel pant
but too much vibration for a filament type lamp. LED should be ok with
vibration though. Any landing light suggestions?
Albert Gardner
RV-10 N991RV
Yuma, AZ


________________________________  Message 4  _____________________________________


Time: 11:07:47 AM PST US
Subject: Re: Re: CofG Question (Sort of)
From: Tim Olson <Tim(at)MyRV10.com>


I can't comment on most of the things in the email, but
I can tell you that a bit over a year ago I bought a set
of HID's on ebay, brand new, and the pair of them with
ballasts was about $110.  So, if you do end up wanting
to replace your HID with another HID, the cost is
probably much less than your original purchase.  I think
I paid $400 each back in 2005, and now they're more like
$110/pr if you find them right.
I'm assuming your HID is mounted in a wing cutout.

You should be able to find an LED that will fit into
that spot too, but you'll spend a bunch more...but you
can get a real good light too.

Tim


On 11/13/2017 12:45 PM, Albert wrote:
>
> Well, if it isn't one thing it's another. Last week my Garmin 496 GPS died,
> this week it's my HID landing lights. So I'm going to replace them with
> LEDs. Vans sells a Sunspot LED wing tip kit for the RV10/14 kits. From the
> picture I can't tell if they are a exact replacement for the original RV-10
> wing tip landing light or not. Vans picture doesn't show the position lights
> that the original installation has in the wing tip. Maybe there is a better
> LED light available. Wouldn't mind installing them inboard from the tips for
> better center line coverage. I've considered an additional light under the
> prop for center line coverage. Tried mounting one on the front wheel pant
> but too much vibration for a filament type lamp. LED should be ok with
> vibration though. Any landing light suggestions?
> Albert Gardner
> RV-10 N991RV
> Yuma, AZ
>


________________________________  Message 5  _____________________________________


Time: 12:26:24 PM PST US
From: Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)>
Subject: Re: Re: CofG Question (Sort of)

Just leave the pail of water outside overnight and you will have a solid
weight. ;-(

-sent from the I-droid implanted in my forearm

On Mon, Nov 13, 2017 at 9:28 AM, kearney <kearney(at)shaw.ca (kearney(at)shaw.ca)> wrote:

>
> Guys
>
> Thanks for the info. I'll likely install bump bar in tail but use the
> water in pail trick as well.
>
> Cheers
>
> Les
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=474945#474945
>
>



====================================
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
====================================
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
====================================
WIKI -
lank" rel="noreferrer">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
====================================






- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group