Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Aluminium Elbow
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
ward.t(at)xtra.co.nz
Guest
PostPosted: Sun Dec 17, 2017 12:23 pm    Post subject: Aluminium Elbow Reply with quote
EUROPA ALUMINIUM FUEL FILLER PIPE

*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.

*The Aluminium pipe is bent to 55 degrees

*The pipe is supplied with added length so it can be cut to the desired length.

*Clean inside of pipe with a mild solvent or Motor gas.

*Cut fuel resistant rubber hose to join at both ends with Hose clamps.


Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand

Phone 0064 3 3515166
ward.t(at)xtra.co.nz
[img]cid:BD0E2CFA2D8B4A2F978FE2D6B20BF094(at)WaiwetuFamily[/img][img]cid:C185E8288DED4CA89CDFDCA98FF10D47(at)WaiwetuFamily[/img]
2 Hose Clamps
[img]cid:4B920650CC6A4CAEAB0134504314DD0E(at)WaiwetuFamily[/img]
Rubber Hose

2 Hose Clamps

[img]cid:9244B8C5AC6B4DD281DACBEB0AA68131(at)WaiwetuFamily[/img][img]cid:0A7D7EF6ED1045FD9467E74A39B5C2B1(at)WaiwetuFamily[/img][img]cid:968A9B8A7B5A456AAB703230DDF3536A(at)WaiwetuFamily[/img]
Fuel Tank inlet
[img]cid:AE0DC9DDE6D1473398290A179082550F(at)WaiwetuFamily[/img]
Aluminium Pipe
[img]cid:E0FF51E32E3244E8A3756F76E1650295(at)WaiwetuFamily[/img][img]cid:B39E5B6A1C9D4245AD5E8E878C3D68EE(at)WaiwetuFamily[/img][img]cid:A20B8644FB964A7B9478FBD9409BEFEA(at)WaiwetuFamily[/img][img]cid:5D3799F50E9F4E398273992882BA51BA(at)WaiwetuFamily[/img][img]cid:84B7D865E7714286A462657F8AC91C44(at)WaiwetuFamily[/img]
Fuel Tank
[img]cid:F6A2D93BAD2740258D5898FEE9FB3297(at)WaiwetuFamily[/img][img]cid:66E37AC3941C40E3864A38CAF92C37AF(at)WaiwetuFamily[/img][img]cid:AE0C13E531224BB7B8470078D62F8743(at)WaiwetuFamily[/img][img]cid:78D2A0E263614D9693F406FB7AAC7910(at)WaiwetuFamily[/img][img]cid:6E90D1CC31ED4131A866788C4E47CE2F(at)WaiwetuFamily[/img][img]cid:847F99BDC928462E8A67A9292CC6FEDB(at)WaiwetuFamily[/img][img]cid:298EDCBCF6DC44668A7C494235BD2AA8(at)WaiwetuFamily[/img] Plastic Fuel Filler

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List


clip_image001[2].gif
 Description:
 Filesize:  180 Bytes
 Viewed:  15008 Time(s)

clip_image001[2].gif
clip_image002[2].gif
 Description:
 Filesize:  174 Bytes
 Viewed:  15008 Time(s)

clip_image002[2].gif
clip_image004[2].gif
 Description:
 Filesize:  209 Bytes
 Viewed:  15008 Time(s)

clip_image004[2].gif
clip_image005[2].gif
 Description:
 Filesize:  269 Bytes
 Viewed:  15008 Time(s)

clip_image005[2].gif
clip_image006[2].gif
 Description:
 Filesize:  199 Bytes
 Viewed:  15008 Time(s)

clip_image006[2].gif
clip_image007[2].gif
 Description:
 Filesize:  251 Bytes
 Viewed:  15008 Time(s)

clip_image007[2].gif
clip_image008[2].gif
 Description:
 Filesize:  280 Bytes
 Viewed:  15008 Time(s)

clip_image008[2].gif
clip_image009[2].gif
 Description:
 Filesize:  273 Bytes
 Viewed:  15008 Time(s)

clip_image009[2].gif
clip_image010[2].gif
 Description:
 Filesize:  278 Bytes
 Viewed:  15008 Time(s)

clip_image010[2].gif
clip_image011[2].gif
 Description:
 Filesize:  312 Bytes
 Viewed:  15008 Time(s)

clip_image011[2].gif
clip_image012[2].gif
 Description:
 Filesize:  310 Bytes
 Viewed:  15008 Time(s)

clip_image012[2].gif
clip_image013[2].gif
 Description:
 Filesize:  183 Bytes
 Viewed:  15008 Time(s)

clip_image013[2].gif
clip_image014[2].gif
 Description:
 Filesize:  445 Bytes
 Viewed:  15008 Time(s)

clip_image014[2].gif
clip_image015[2].gif
 Description:
 Filesize:  454 Bytes
 Viewed:  15008 Time(s)

clip_image015[2].gif
clip_image016[2].gif
 Description:
 Filesize:  461 Bytes
 Viewed:  15008 Time(s)

clip_image016[2].gif
clip_image017[2].gif
 Description:
 Filesize:  1.04 KB
 Viewed:  15008 Time(s)

clip_image017[2].gif
clip_image018[2].gif
 Description:
 Filesize:  393 Bytes
 Viewed:  15008 Time(s)

clip_image018[2].gif
clip_image019[2].gif
 Description:
 Filesize:  740 Bytes
 Viewed:  15008 Time(s)

clip_image019[2].gif
clip_image020[3].gif
 Description:
 Filesize:  980 Bytes
 Viewed:  15008 Time(s)

clip_image020[3].gif
Wardery.vcf
 Description:

Download
 Filename:  Wardery.vcf
 Filesize:  85 Bytes
 Downloaded:  457 Time(s)
Back to top
peterz(at)zutrasoft.com
Guest
PostPosted: Sun Dec 17, 2017 2:07 pm    Post subject: Aluminium Elbow Reply with quote
I'm in, although being in canada, I guess mailing it USPS would be the best way.
Please let me know the cost, and ill forward you my addess etc.
Cheers and thx,
Pete Smile
A239

On Dec 17, 2017, at 3:22 PM, Tim Ward <ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)> wrote:
Quote:

EUROPA ALUMINIUM FUEL FILLER PIPE

*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.

*The Aluminium pipe is bent to 55 degrees

*The pipe is supplied with added length so it can be cut to the desired length.

*Clean inside of pipe with a mild solvent or Motor gas.

*Cut fuel resistant rubber hose to join at both ends with Hose clamps.


Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand

Phone 0064 3 3515166
ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
<clip_image001[2].gif><clip_image002[2].gif>
2 Hose Clamps
<clip_image004[2].gif>
Rubber Hose

2 Hose Clamps

<clip_image005[2].gif><clip_image006[2].gif><clip_image007[2].gif>
Fuel Tank inlet
<clip_image008[2].gif>
Aluminium Pipe
<clip_image009[2].gif><clip_image010[2].gif><clip_image011[2].gif><clip_image012[2].gif><clip_image013[2].gif>
Fuel Tank
<clip_image014[2].gif><clip_image015[2].gif><clip_image016[2].gif><clip_image017[2].gif><clip_image018[2].gif><clip_image019[2].gif><clip_image020[3].gif> Plastic Fuel Filler

<Wardery.vcf>


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
alan.twigg775(at)gmail.co
Guest
PostPosted: Sun Dec 17, 2017 11:15 pm    Post subject: Aluminium Elbow Reply with quote
Tim I do not need one just yet but put me down for one, I am sure I will need it in due course.
Alan Twigg
Motorglider kit 463
Oxfordshire UK

Sent from my iPad

On 17 Dec 2017, at 22:06, Pete <peterz(at)zutrasoft.com (peterz(at)zutrasoft.com)> wrote:
Quote:

I'm in, although being in canada, I guess mailing it USPS would be the best way.
Please let me know the cost, and ill forward you my addess etc.
Cheers and thx,
Pete Smile
A239

On Dec 17, 2017, at 3:22 PM, Tim Ward <ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)> wrote:
Quote:

EUROPA ALUMINIUM FUEL FILLER PIPE

*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.

*The Aluminium pipe is bent to 55 degrees

*The pipe is supplied with added length so it can be cut to the desired length.

*Clean inside of pipe with a mild solvent or Motor gas.

*Cut fuel resistant rubber hose to join at both ends with Hose clamps.


Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand

Phone 0064 3 3515166
ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
<clip_image001[2].gif><clip_image002[2].gif>
2 Hose Clamps
<clip_image004[2].gif>
Rubber Hose

2 Hose Clamps

<clip_image005[2].gif><clip_image006[2].gif><clip_image007[2].gif>
Fuel Tank inlet
<clip_image008[2].gif>
Aluminium Pipe
<clip_image009[2].gif><clip_image010[2].gif><clip_image011[2].gif><clip_image012[2].gif><clip_image013[2].gif>
Fuel Tank
<clip_image014[2].gif><clip_image015[2].gif><clip_image016[2].gif><clip_image017[2].gif><clip_image018[2].gif><clip_image019[2].gif><clip_image020[3].gif> Plastic Fuel Filler

<Wardery.vcf>



- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
carlp101



Joined: 07 Mar 2016
Posts: 120
PostPosted: Mon Dec 18, 2017 3:03 am    Post subject: Re: Aluminium Elbow Reply with quote
Here is a pic of the elbow in place.

Regards
Carl

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List


20171212_162432_resized.jpg
 Description:
 Filesize:  1.18 MB
 Viewed:  14978 Time(s)

20171212_162432_resized.jpg


Last edited by carlp101 on Mon Dec 18, 2017 3:09 am; edited 1 time in total
Back to top
View user's profile Send private message
Burrilla



Joined: 25 Apr 2015
Posts: 182
PostPosted: Mon Dec 18, 2017 3:07 am    Post subject: Re: Aluminium Elbow Reply with quote
carlp101 wrote:
Here is a pic of the elbow in place.

Regards
Carl


No Picture?

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Burrilla



Joined: 25 Apr 2015
Posts: 182
PostPosted: Mon Dec 18, 2017 3:11 am    Post subject: Re: Aluminium Elbow Reply with quote
I'm interested please.

Although subject to the LAA Standard Mod outcome obviously.

Alan Burrill
G-CDPY
ward.t(at)xtra.co.nz wrote:
EUROPA ALUMINIUM FUEL FILLER PIPE

*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.

*The Aluminium pipe is bent to 55 degrees

*The pipe is supplied with added length so it can be cut to the desired length.

*Clean inside of pipe with a mild solvent or Motor gas.

*Cut fuel resistant rubber hose to join at both ends with Hose clamps.


Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand

Phone 0064 3 3515166
ward.t(at)xtra.co.nz
[img]cid:BD0E2CFA2D8B4A2F978FE2D6B20BF094(at)WaiwetuFamily[/img][img]cid:C185E8288DED4CA89CDFDCA98FF10D47(at)WaiwetuFamily[/img]
2 Hose Clamps
[img]cid:4B920650CC6A4CAEAB0134504314DD0E(at)WaiwetuFamily[/img]
Rubber Hose

2 Hose Clamps



- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
ward.t(at)xtra.co.nz
Guest
PostPosted: Mon Dec 18, 2017 9:50 am    Post subject: Aluminium Elbow Reply with quote
Hi there,
The elbow is not welded to create angle. It is bent at the manufacturing stage to the required angle. It is long enough to be cut to fit.
Cheers,
Tim

Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand

ward.t(at)xtra.co.nz

Mob +64 210640221
Quote:
On 19/12/2017, at 12:07 AM, Burrilla <alanb(at)dpy01.co.uk> wrote:




carlp101 wrote:
> Here is a pic of the elbow in place.
>
> Regards
> Carl


No Picture?




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=476553#476553











- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
dpark748(at)me.com
Guest
PostPosted: Mon Dec 18, 2017 9:56 am    Post subject: Aluminium Elbow Reply with quote
Put me down for one pending new Mod. Just in case my installation is not approved with welded alloy angle?

Dave Park
Quote:
On 18 Dec 2017, at 17:49, Tim Ward <ward.t(at)xtra.co.nz> wrote:



Hi there,
The elbow is not welded to create angle. It is bent at the manufacturing stage to the required angle. It is long enough to be cut to fit.
Cheers,
Tim

Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand

ward.t(at)xtra.co.nz

Mob +64 210640221


> On 19/12/2017, at 12:07 AM, Burrilla <alanb(at)dpy01.co.uk> wrote:
>
>
>
>
> carlp101 wrote:
>> Here is a pic of the elbow in place.
>>
>> Regards
>> Carl
>
>
> No Picture?
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476553#476553
>
>
>
>
>
>
>
>
>







- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
ward.t(at)xtra.co.nz
Guest
PostPosted: Mon Dec 18, 2017 10:03 am    Post subject: Aluminium Elbow Reply with quote
Pete,I also fly to Vancouver so will post it from there if it goes ahead.
Cheers,
Tim

Tim Ward12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
Mob +64 210640221


On 18/12/2017, at 11:06 AM, Pete <peterz(at)zutrasoft.com (peterz(at)zutrasoft.com)> wrote:
Quote:

I'm in, although being in canada, I guess mailing it USPS would be the best way.
Please let me know the cost, and ill forward you my addess etc.
Cheers and thx,
Pete Smile
A239

On Dec 17, 2017, at 3:22 PM, Tim Ward <ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)> wrote:
Quote:

EUROPA ALUMINIUM FUEL FILLER PIPE

*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.

*The Aluminium pipe is bent to 55 degrees

*The pipe is supplied with added length so it can be cut to the desired length.

*Clean inside of pipe with a mild solvent or Motor gas.

*Cut fuel resistant rubber hose to join at both ends with Hose clamps.


Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand

Phone 0064 3 3515166
ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
<clip_image001[2].gif><clip_image002[2].gif>
2 Hose Clamps
<clip_image004[2].gif>
Rubber Hose

2 Hose Clamps

<clip_image005[2].gif><clip_image006[2].gif><clip_image007[2].gif>
Fuel Tank inlet
<clip_image008[2].gif>
Aluminium Pipe
<clip_image009[2].gif><clip_image010[2].gif><clip_image011[2].gif><clip_image012[2].gif><clip_image013[2].gif>
Fuel Tank
<clip_image014[2].gif><clip_image015[2].gif><clip_image016[2].gif><clip_image017[2].gif><clip_image018[2].gif><clip_image019[2].gif><clip_image020[3].gif> Plastic Fuel Filler

<Wardery.vcf>



- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Kelvin Weston



Joined: 14 Apr 2010
Posts: 90
Location: Hampshire, UK
PostPosted: Mon Dec 18, 2017 11:31 am    Post subject: Re: Aluminium Elbow Reply with quote
Hi All
Damn! Just fitted Tim's pipe and now it looks like I will have to remove and replace the rubber hose with something else, yet to be decided by the LAA.
Two steps forward and one back!
Picture attached - the pipe supplied by Tim is bent not welded.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List


Alloy Fuel Pipe.jpg
 Description:
 Filesize:  53.83 KB
 Viewed:  14905 Time(s)

Alloy Fuel Pipe.jpg

_________________
Regards

Kelv Weston
Kit 497
kelv@kdweston.co.uk
Back to top
View user's profile Send private message Send e-mail
gilles.thesee(at)free.fr
Guest
PostPosted: Mon Dec 18, 2017 11:53 am    Post subject: Aluminium Elbow Reply with quote
Le 18/12/2017 20:31, Kelvin Weston a crit:

Quote:
Quote:

Picture attached
Hi Kevin,

Out of curiosity, what are those lines visible in the composite, I suppose it's not a variety of peel ply ?

--
Best regards,
Gilles
http://contrails.free.fr
http://lapierre.skunkworks.free.fr

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
ward.t(at)xtra.co.nz
Guest
PostPosted: Mon Dec 18, 2017 11:59 am    Post subject: Aluminium Elbow Reply with quote
Hi All,
Here is a LAA Mod Approval for this Aircraft only. I think it must be the
old "Classic" fuel system?
Hope this attachment comes through.
Cheers,
Tim
Tim Ward,
12 Waiwetu Street,
Fendalton,
Christchurch 8052
New Zealand

Ph; 03 3515166
Mob; 0210640221

email; ward.t(at)xtra.co.nz
--

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List


Europa_Aluminum_Pipe_UKCAA_MOD_APPROVAL.pdf
 Description:

Download
 Filename:  Europa_Aluminum_Pipe_UKCAA_MOD_APPROVAL.pdf
 Filesize:  328.83 KB
 Downloaded:  397 Time(s)
Back to top
Dave Disney



Joined: 16 Aug 2010
Posts: 54
Location: Weston-Super-Mare
PostPosted: Mon Dec 18, 2017 1:22 pm    Post subject: Re: Aluminium Elbow Reply with quote
Hello Tim,

I would like to join the list of people who want an aluminium elbow, looks like you might need a suitcase full of them when you visit the UK.

I'll supply my details in a PM.

Regards

Dave

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message Send e-mail
ward.t(at)xtra.co.nz
Guest
PostPosted: Mon Dec 18, 2017 2:37 pm    Post subject: Aluminium Elbow Reply with quote
Hi Dave,
Ok I will put you on the list.
Will keep in touch.
Tim

Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand

ward.t(at)xtra.co.nz

Mob +64 210640221
Quote:
On 19/12/2017, at 10:22 AM, Dave Disney <davedisney(at)yahoo.co.uk> wrote:



Hello Tim,

I would like to join the list of people who want an aluminium elbow, looks like you might need a suitcase full of them when you visit the UK.

I'll supply my details in a PM.

Regards

Dave




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=476582#476582











- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Kelvin Weston



Joined: 14 Apr 2010
Posts: 90
Location: Hampshire, UK
PostPosted: Mon Dec 18, 2017 2:41 pm    Post subject: Re: Aluminium Elbow Reply with quote
Hi Gilles
No, it's not peel ply. I think it is a tracer thread woven into the glass fabric to ensure the glass is laid up in the correct orientation during the moulding lay-up.

Here is a picture of the inside of the rear fuselage.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List


Back End.jpg
 Description:
 Filesize:  50.63 KB
 Viewed:  14871 Time(s)

Back End.jpg

_________________
Regards

Kelv Weston
Kit 497
kelv@kdweston.co.uk
Back to top
View user's profile Send private message Send e-mail
Kelvin Weston



Joined: 14 Apr 2010
Posts: 90
Location: Hampshire, UK
PostPosted: Mon Dec 18, 2017 2:45 pm    Post subject: Re: Aluminium Elbow Reply with quote
Hi Gilles
No, it's not peel ply. I think it is a tracer thread woven into the glass fabric to ensure the glass is laid up in the correct orientation during the moulding lay-up.

Here is a picture of the inside of the rear fuselage.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List


Back End.jpg
 Description:
 Filesize:  50.63 KB
 Viewed:  14870 Time(s)

Back End.jpg

_________________
Regards

Kelv Weston
Kit 497
kelv@kdweston.co.uk
Back to top
View user's profile Send private message Send e-mail
ward.t(at)xtra.co.nz
Guest
PostPosted: Mon Dec 18, 2017 2:47 pm    Post subject: Aluminium Elbow Reply with quote
Hi All,
Just been down to see the manufacturer of the elbow. They said there would be no problem in setting up the jig again. They are going to come back with a price for 10 and 20 pipes.
Will keep you informed. Will not give the go ahead until we have enough orders and the LAA Mod. approval is through. Is has already been approved with one builder in 2011 but I am sure that was the Classic Fuel System with the centre roof inlet. However no real difference.

Cheers,
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand

ward.t(at)xtra.co.nz

Mob +64 210640221
Quote:
On 19/12/2017, at 11:35 AM, Tim Ward <ward.t(at)xtra.co.nz> wrote:

Hi Dave,
Ok I will put you on the list.
Will keep in touch.
Tim

Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand

ward.t(at)xtra.co.nz

Mob +64 210640221


> On 19/12/2017, at 10:22 AM, Dave Disney <davedisney(at)yahoo.co.uk> wrote:
>
>
>
> Hello Tim,
>
> I would like to join the list of people who want an aluminium elbow, looks like you might need a suitcase full of them when you visit the UK.
>
> I'll supply my details in a PM.
>
> Regards
>
> Dave
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476582#476582
>
>
>
>
>
>
>
>
>



- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
pete(at)lawless.info
Guest
PostPosted: Mon Dec 18, 2017 2:47 pm    Post subject: Aluminium Elbow Reply with quote
Hi All

This 13070 is for the Classic long long rubber pipe. Watch this space
for shortly to be released Standard Mod SM 13070.

Pete

G-RMAC Classic # 109
On 18/12/17 19:58, Tim Ward wrote:
[quote]
Hi All,
Here is a LAA Mod Approval for this Aircraft only. I think it must be
the old "Classic" fuel system?
Hope this attachment comes through.
Cheers,
Tim
Tim Ward,
12 Waiwetu Street,
Fendalton,
Christchurch 8052
New Zealand

Ph; 03 3515166
Mob; 0210640221

email; ward.t(at)xtra.co.nz
--

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Matt Dovey



Joined: 13 May 2017
Posts: 47
Location: st albans, england
PostPosted: Mon Dec 18, 2017 3:02 pm    Post subject: Re: Aluminium Elbow Reply with quote
Not sure if I need one bit put me down any way

Matt

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message Visit poster's website
hpreusser(at)vtxmail.ch
Guest
PostPosted: Mon Dec 18, 2017 10:42 pm    Post subject: Aluminium Elbow Reply with quote
Hi Tim

I need one, can you pur me on the list?

Hans-Peter
Kit 498, still building

Hans-Peter Reusser
Spiezbergstrasse 13
3700 Spiez, Switzerland

Von meinem iPad gesendet

[quote] Am 18.12.2017 um 19:02 schrieb Tim Ward <ward.t(at)xtra.co.nz>:

Pete,
I also fly to Vancouver so will post it from there if it goes ahead.
Cheers,
Tim

Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand

ward.t(at)xtra.co.nz

Mob +64 210640221


> On 18/12/2017, at 11:06 AM, Pete <peterz(at)zutrasoft.com> wrote:
>
> I'm in, although being in canada, I guess mailing it USPS would be the best way.
>
> Please let me know the cost, and ill forward you my addess etc.
>
> Cheers and thx,
> Pete Smile
> A239
>
>> On Dec 17, 2017, at 3:22 PM, Tim Ward <ward.t(at)xtra.co.nz> wrote:
>>
>> EUROPA ALUMINIUM FUEL FILLER PIPE
>>
>> *Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.
>>
>> *The Aluminium pipe is bent to 55 degrees
>>
>> *The pipe is supplied with added length so it can be cut to the desired length.
>>
>> *Clean inside of pipe with a mild solvent or Motor gas.
>>
>> *Cut fuel resistant rubber hose to join at both ends with Hose clamps

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group